[PATCH 1/1] doc: describe QEMU emulation of block devices

[Heinrich Schuchardt]

* Add a new page about the emulation of block devices
* Add semihosting to the emulation index page
* Set toc maxdepth to 1 to improve readability

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt at canonical.com>
---
 doc/board/emulation/blkdev.rst | 38 ++++++++++++++++++++++++++++++++++
 doc/board/emulation/index.rst  |  4 +++-
 2 files changed, 41 insertions(+), 1 deletion(-)
 create mode 100644 doc/board/emulation/blkdev.rst

diff --git a/doc/board/emulation/blkdev.rst b/doc/board/emulation/blkdev.rst
new file mode 100644
index 0000000000..dc83a00526
--- /dev/null
+++ b/doc/board/emulation/blkdev.rst
@@ -0,0 +1,38 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Emulation of block devices
+--------------------------
+
+QEMU can emulate common block devices by adding the following parameters to
+the qemu-system-<arch> command line:
+
+* MMC
+
+  .. code-block:: bash
+
+      -device sdhci-pci,sd-spec-version=3 \
+      -device sd-card,drive=MMC1 \
+      -drive if=none,file=disk.img,format=raw,id=MMC1
+
+* NVMe
+
+  .. code-block:: bash
+
+      -drive if=none,file=disk.img,format=raw,id=NVME1 \
+      -device nvme,drive=NVME1,serial=nvme-1
+
+* SATA
+
+  .. code-block:: bash
+
+      -device ahci,id=ahci0 \
+      -drive if=none,file=disk.img,format=raw,id=SATA1 \
+      -device ide-hd,bus=ahci0.0,drive=SATA1
+
+* USB
+
+  .. code-block:: bash
+
+      -device qemu-xhci \
+      -drive if=none,file=disk.img,format=raw,id=USB1 \
+      -device usb-storage,drive=USB1
diff --git a/doc/board/emulation/index.rst b/doc/board/emulation/index.rst
index b5b6c3fa0d..932c65adeb 100644
--- a/doc/board/emulation/index.rst
+++ b/doc/board/emulation/index.rst
@@ -4,8 +4,10 @@ Emulation
 =========
 
 .. toctree::
-   :maxdepth: 2
+   :maxdepth: 1
 
+   blkdev
+   ../../usage/semihosting
    qemu-arm
    qemu-mips
    qemu-ppce500
-- 
2.40.1