[PATCH v2 1/4] cmd: bind: Add unbind command with driver filter

[Miquel Raynal]

Hi Marek,

marex at denx.de wrote on Mon, 17 Jul 2023 13:21:34 +0200:

> Extend the driver core to perform lookup by both OF node and driver
> bound to the node. Use this to look up specific device instances to
> unbind from nodes in the unbind command. One example where this is
> needed is USB peripheral controller, which may have multiple gadget
> drivers bound to it. The unbind command has to select that specific
> gadget driver instance to unbind from the controller, not unbind the
> controller driver itself from the controller.
> 
> USB ethernet gadget usage looks as follows with this change. Notice
> the extra 'usb_ether' addition in the 'unbind' command at the end.
> "
> bind /soc/usb-otg at 49000000 usb_ether

I don't really get why this is needed? Yes, having proper bind and
unbind methods and having them called internally is relevant, but when
you have a single OTG controller, why is this needed? It basically
breaks the CLI, making bisects more painful and all updates just fail.

> setenv ethact usb_ether
> setenv loadaddr 0xc2000000
> setenv ipaddr 10.0.0.2
> setenv serverip 10.0.0.1
> setenv netmask 255.255.255.0
> tftpboot 0xc2000000 10.0.0.1:test.file
> unbind /soc/usb-otg at 49000000 usb_ether
> "
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Kevin Hilman <khilman at baylibre.com>
> Cc: Lukasz Majewski <lukma at denx.de>
> Cc: Marek Vasut <marex at denx.de>
> Cc: Simon Glass <sjg at chromium.org>

I've tested the whole series, unfortunately is does not work on
AM335x/BBBW:

* Any recovery attempted using the network will now fail in
  the SPL, where, AFAIK, there is no way to manually bind:

U-Boot SPL 2023.07-00806-gac80e6de9cf (Jul 23 2023 - 19:45:51 +0200)
Trying to boot from USB eth
Could not get PHY for eth_cpsw: addr 0
eth0: eth_cpswusing musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
, eth1: usb_ether

* The bind command was not available on my default configuration,
  making it even difficult for people unaware that this command is
  now required to fix their common commands.

* Any command that expects the usb_ether driver will now fail badly
  even after the bind call:

=> bind /ocp/usb at 47400000/usb at 47401000 usb_ether
=> fastboot usb 0                                
couldn't find an available UDC
g_dnl_register: failed!, error: -19
exit not allowed from main input shell.
=> tftp 0x81000000 zImage
dev_get_priv: null device
data abort
pc : [<9ffa04ba>]          lr : [<9ff86d5f>]
reloc pc : [<8083b4ba>]    lr : [<80821d5f>]
sp : 9df2f920  ip : 00000000     fp : 00000003
r10: 9df4cf48  r9 : 9df44ea0     r8 : 9ffec33c
r7 : 00004a53  r6 : 00000000     r5 : 00000bb8  r4 : 9df4d3c0
r3 : 9ff97653  r2 : fff1102c     r1 : 00000000  r0 : 00000000
Flags: nzcv  IRQs off  FIQs on  Mode SVC_32 (T)
Code: 9ffd b508 f7e6 fc4b (6801) 2000 
Resetting CPU ...

Is there anything I missed?

Thanks,
Miquèl