[u-boot][PATCH] board: at91: sama5d29_curiosity: add initial support for sama5d29_curiosity

[Eugen Hristev]

Hello Mihai,

Thank you for the patch.

However, the at91 maintainer tree nowadays has a big problem, I cannot 
apply patches because the size of the SPL will overflow.
There is a pending patch that fixes it, but it has not been tested.
Here you can help, and test this integration branch (at least on sama5d2 
ICP, but if you can test on multiple boards, it's even better) :

https://source.denx.de/u-boot/custodians/u-boot-at91/-/tree/testing?ref_type=heads

Once this is tested you can reply with a Tested-by: tag, and we can move 
along.
Without testing the patch that fixes the size restraint (it's the 
CONFIG_LTO patch), the tree is stalled.

One small nitpick below, and I am looking forward for your reply,

Eugen


On 7/20/23 10:54, Mihai Sain wrote:
> Add initial support for sama5d29_curiosity board.
> 
> Hardware:
> SoC: SAMA5D29 500 MHz
> DRAM: LPDDR2 512 MiB
> PMIC: MCP16502
> Debug: UART0
> Flash: QSPI NOR 8 MiB
> RGB LCD connector
> Mikrobus connectors x 2
> SD-Card connectors x 2
> USB 2.0 x 2
> 
> Signed-off-by: Mihai Sain <mihai.sain at microchip.com>
> ---

> +CONFIG_SYS_PROMPT="[root at sama5d29 ~]$ "

Can you remove this. It looks like a Linux prompt and might be confusing 
for people

(and everywhere below)