[PATCH] sunxi: H6: Enable Ethernet on Orange Pi One Plus

[Corentin Labbe]

Le Sun, Jul 16, 2023 at 01:35:02AM +0100, Andre Przywara a écrit :
> On Tue, 11 Jul 2023 19:40:21 +0000
> Anne Macedo <retpolanne at posteo.net> wrote:
> 
> Hi Anne,
> 
> thanks for reaching out to the list! But please try to avoid
> pushing any patches downstream (Yocto) before they are accepted
> or at least discussed upstream, see below.
> 
> > On 11.07.2023 02:39, Anne Macedo wrote:
> > > Enable Ethernet on Orange Pi One Plus by using the correct phy for
> > > Realtek RTL8211E instead of the Generic One. Also use CONFIG_MACPWR to
> > > turn on ethernet on startup.
> > > 
> > > After this patch is applied, a few issues can be seen:
> > > 
> > > - there's still a PHY reset timed out error that doesn't seem to cause
> > >   any impacts to the overall connection
> > > 
> > > - sometimes the emac driver times out after reset (yellow LED turns on
> > >   and never blinks)
> > > 
> > > For future patches: for now, CONFIG_MACPWR is the only way to enable
> > > Ethernet on boot. There's already code on the dts for using the 
> > > 3v3-gmac
> > > regulator. However, it is not probed on boot, so it only starts after a
> > > "regulator status" command is issued.
> 
> MACPWR is going to go away (probably in the next two weeks), so please
> have a look at this patch and see if that works for you:
> https://github.com/apritzel/u-boot/commit/be1fdb42968
> 
> > > 
> > > More details about the troubleshooting on [1].
> > > 
> > > [1]
> > > https://lore.kernel.org/u-boot/4wsvwgy56e2xfgtvioru2tf2ofkqprlts36qggivxogww6pn5j@4jk63zxhzhag/
> > > 
> > > Signed-off-by: Anne Macedo <retpolanne at posteo.net>
> > > ---
> > >  arch/arm/dts/sun50i-h6-orangepi-one-plus.dts | 2 +-
> > >  configs/orangepi_one_plus_defconfig          | 4 ++++
> > >  2 files changed, 5 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
> > > b/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
> > > index 29a081e72a..6427c58f8a 100644
> > > --- a/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
> > > +++ b/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
> > > @@ -37,7 +37,7 @@
> > > 
> > >  &mdio {
> > >  	ext_rgmii_phy: ethernet-phy at 1 {
> > > -		compatible = "ethernet-phy-ieee802.3-c22";
> > > +		compatible = "ethernet-phy-id001c.c915", 
> > > "ethernet-phy-ieee802.3-c22" ;
> 
> So this is really odd, why would you need that? 001c.c915 is the ID for
> the normal standard Realtek 8211E PHY, which would be auto-detected via
> MDIO. You just need to define CONFIG_PHY_REALTEK to include support.
> Forcing this in the DT is not necessary and smells wrong.
> 
> But I suppose you needed that to get it to work, so could this be a
> timing issue? Maybe the PHY doesn't come up quick enough after just
> pulling PD6 high, so the auto-detection wouldn't work? The DT has a
> "startup-delay-us = <100000>;" property, which MACPWR doesn't know
> about and wouldn't observe.
> So could you check whether just applying the "Remove MACPWR" patch, plus
> adding "CONFIG_SUN8I_EMAC=y" and "CONFIG_PHY_REALTEK=y" to defconfig
> fixes the issue? You may need to enable CONFIG_DM_REGULATOR_FIXED=y as
> well, although this would become standard for all sunxi boards soon.
> 
> And you must NOT use SUNXI_SETUP_REGULATORS=0 in TF-A, as you need
> ALDO2 to be set up by TF-A. We introduced this build option to
> accommodate the OrangePi 3 board, which requires a specifically timed
> regulator setup, which both TF-A and U-Boot would not observe. To not
> crash the PHY with any incorrect regulator setup, we use this option to
> make at least Linux work. The side effect is that some peripherals
> (HDMI, Ethernet) will not work in U-Boot.
> Also please note that a reset from Linux might not affect the PMIC, so
> there might be different behaviour between and cold and warm boot.
> 
> Cheers,
> Andre
> 
> > >  		reg = <1>;
> > >  	};
> > >  };
> > > diff --git a/configs/orangepi_one_plus_defconfig
> > > b/configs/orangepi_one_plus_defconfig
> > > index aa5f540eb1..a1835492db 100644
> > > --- a/configs/orangepi_one_plus_defconfig
> > > +++ b/configs/orangepi_one_plus_defconfig
> > > @@ -8,3 +8,7 @@ CONFIG_SUNXI_DRAM_H6_LPDDR3=y
> > >  # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> > >  CONFIG_USB_EHCI_HCD=y
> > >  CONFIG_USB_OHCI_HCD=y
> > > +CONFIG_SUN8I_EMAC=y
> > > +CONFIG_PHY_REALTEK=y
> > > +CONFIG_PHY_ETHERNET_ID=y
> > > +CONFIG_MACPWR="PD6"  
> > 
> > Adding linux-sunxi to the thread (I unfortunately forgot this list)
> > 
> 
> 

Hello

Note that there is already a try to fix this in upstream linux:
The v4 can be found at https://lore.kernel.org/linux-arm-kernel/Y3RDumClNkEW6L4F@lunn.ch/T/

And that I will send soon my last version https://github.com/montjoie/linux/tree/opi3-v5

Regards