[RFC PATCH 2/4] arm: mach-k3: am62: Add timer0 id to the dev list

[Nishanth Menon]

From: Sjoerd Simons <sjoerd at collabora.com>

Timer0 is used by u-boot as the tick timer; Add it to the soc devices
list so it can be enabled via the k3 power controller.

Signed-off-by: Sjoerd Simons <sjoerd at collabora.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
Tested-by: Ravi Gunasekaran <r-gunasekaran at ti.com>
Tested-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
Cc: Francesco Dolcini <francesco at dolcini.it>
Cc: Wadim Egorov <w.egorov at phytec.de>
[nm at ti.com: Fixup num_devices]
Signed-off-by: Nishanth Menon <nm at ti.com>
---
Changes since Sjoerd's revision:
I fixed up the num_devs to be 22.

V1: https://lore.kernel.org/r/20230406185542.1179073-3-sjoerd@collabora.com
 arch/arm/mach-k3/am62x/dev-data.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-k3/am62x/dev-data.c b/arch/arm/mach-k3/am62x/dev-data.c
index 616d0650b9c0..c747769cf05c 100644
--- a/arch/arm/mach-k3/am62x/dev-data.c
+++ b/arch/arm/mach-k3/am62x/dev-data.c
@@ -58,6 +58,7 @@ static struct ti_dev soc_dev_list[] = {
 	PSC_DEV(161, &soc_lpsc_list[8]),
 	PSC_DEV(162, &soc_lpsc_list[9]),
 	PSC_DEV(75, &soc_lpsc_list[10]),
+	PSC_DEV(36, &soc_lpsc_list[11]),
 	PSC_DEV(102, &soc_lpsc_list[11]),
 	PSC_DEV(146, &soc_lpsc_list[11]),
 	PSC_DEV(13, &soc_lpsc_list[12]),
@@ -74,5 +75,5 @@ const struct ti_k3_pd_platdata am62x_pd_platdata = {
 	.num_psc = 2,
 	.num_pd = 5,
 	.num_lpsc = 16,
-	.num_devs = 21,
+	.num_devs = 22,
 };
-- 
2.40.0