[PATCH v2 2/9] cmd: boot: implement PMIC based poweroff

[Simon Glass]

Hi Svyatoslav,

On Sun, 30 Jul 2023 at 01:23, Svyatoslav Ryhel <clamor95 at gmail.com> wrote:
>
>
>
> 24 липня 2023 р. 05:28:24 GMT+03:00, Simon Glass <sjg at chromium.org> написав(-ла):
> >Hi Svyatoslav,
> >
> >On Sun, 23 Jul 2023 at 03:00, Svyatoslav Ryhel <clamor95 at gmail.com> wrote:
> >>
> >> нд, 23 лип. 2023 р. о 06:48 Simon Glass <sjg at chromium.org> пише:
> >> >
> >> > Hi Svyatoslav,
> >> >
> >> > On Thu, 20 Jul 2023 at 02:48, Svyatoslav Ryhel <clamor95 at gmail.com> wrote:
> >> > >
> >> > > Use new PMIC ops to perform device poweroff.
> >> > >
> >> > > Signed-off-by: Svyatoslav Ryhel <clamor95 at gmail.com>
> >> > > ---
> >> > >  cmd/Kconfig |  6 ++++++
> >> > >  cmd/boot.c  | 40 ++++++++++++++++++++++++++++++++++++++++
> >> > >  2 files changed, 46 insertions(+)
> >> > >
> >> > > diff --git a/cmd/Kconfig b/cmd/Kconfig
> >> > > index ecfd575237..47654297f8 100644
> >> > > --- a/cmd/Kconfig
> >> > > +++ b/cmd/Kconfig
> >> > > @@ -1439,6 +1439,12 @@ config CMD_POWEROFF
> >> > >         help
> >> > >           Poweroff/Shutdown the system
> >> > >
> >> > > +config CMD_PMIC_POWEROFF
> >> > > +       bool "PMIC poweroff"
> >> > > +       select CMD_POWEROFF
> >> > > +       help
> >> > > +         Shutdown the system using PMIC poweroff sequence.
> >> > > +
> >> > >  config CMD_READ
> >> > >         bool "read - Read binary data from a partition"
> >> > >         help
> >> > > diff --git a/cmd/boot.c b/cmd/boot.c
> >> > > index 14839c1ced..4270034194 100644
> >> > > --- a/cmd/boot.c
> >> > > +++ b/cmd/boot.c
> >> > > @@ -9,7 +9,13 @@
> >> > >   */
> >> > >  #include <common.h>
> >> > >  #include <command.h>
> >> > > +#include <dm.h>
> >> > > +#include <log.h>
> >> > >  #include <net.h>
> >> > > +#include <dm/device-internal.h>
> >> > > +#include <dm/uclass-internal.h>
> >> > > +#include <power/pmic.h>
> >> > > +#include <linux/delay.h>
> >> > >
> >> > >  #ifdef CONFIG_CMD_GO
> >> > >
> >> > > @@ -64,6 +70,40 @@ U_BOOT_CMD(
> >> > >  );
> >> > >
> >> > >  #ifdef CONFIG_CMD_POWEROFF
> >> > > +#ifdef CONFIG_CMD_PMIC_POWEROFF
> >> > > +int do_poweroff(struct cmd_tbl *cmdtp, int flag,
> >> > > +               int argc, char *const argv[])
> >> > > +{
> >> > > +       struct uc_pmic_priv *pmic_priv;
> >> > > +       struct udevice *dev;
> >> > > +       int ret;
> >> > > +
> >> > > +       for (uclass_find_first_device(UCLASS_PMIC, &dev);
> >> > > +            dev;
> >> > > +            uclass_find_next_device(&dev)) {
> >> > > +               if (dev && !device_active(dev)) {
> >> > > +                       ret = device_probe(dev);
> >> > > +                       if (ret)
> >> > > +                               return ret;
> >> > > +               }
> >> > > +
> >> > > +               /* value we need to check is set after probe */
> >> > > +               pmic_priv = dev_get_uclass_priv(dev);
> >> > > +               if (pmic_priv->sys_pow_ctrl) {
> >> > > +                       ret = pmic_poweroff(dev);
> >> > > +
> >> > > +                       /* wait some time and then print error */
> >> > > +                       mdelay(5000);
> >> > > +                       log_err("Failed to power off!!!\n");
> >> > > +                       return ret;
> >> > > +               }
> >> > > +       }
> >> > > +
> >> > > +       /* no device should reach here */
> >> > > +       return 1;
> >> > > +}
> >> > > +#endif
> >> > > +
> >> > >  U_BOOT_CMD(
> >> > >         poweroff, 1, 0, do_poweroff,
> >> > >         "Perform POWEROFF of the device",
> >> > > --
> >> > > 2.39.2
> >> > >
> >> >
> >> > How does this relate to sysreset_walk(SYSRESET_POWER_OFF) and
> >> > do_poweroff() in cmd/boot.c?
> >> >
> >>
> >> Yes, it seems that I have misunderstood you, but non the less, you say
> >> that I have to implement a new separate pmic subdriver just to support
> >> poweroff?
> >
> >Well it sounds like a lot, but it is not that hard. We try to model
> >devices by their functionality, which maps to a uclass, so when we
> >have a multi-function device we tend to model that with children, each
> >with an appropriate uclass.
>
> Alright, fair. I have prepared and tested sysreset for all PMICs I have sent and for Tegra in general. Unfortunately, they cannot be sent before existing patches are accepted and merged.

You can ping the maintainer, or just note (in your cover letter) that
they depend on another series, e.g. with a patchwork link. I often
have 3-4 series backed up.

Regards,
Simon

>
> >Regards,
> >Simon