[PATCH next v3 2/2] rockchip: puma: pass platform parameter to TF-A

[Kever Yang]

On 2023/6/22 00:02, Quentin Schulz wrote:
> From: Quentin Schulz <quentin.schulz at theobroma-systems.com>
>
> Puma supports upstream TF-A and is configured to output serial on UART0
> instead of the default UART2. Since U-Boot is properly configured to
> output on UART0, let's pass the DT to TF-A so there is no need for a
> custom TF-A to make the latter output to UART0 too.
>
> Cc: Quentin Schulz <foss+uboot at 0leil.net>
> Signed-off-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   configs/puma-rk3399_defconfig | 1 -
>   1 file changed, 1 deletion(-)
>
> diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
> index 697f5eccef5..b632fa3dcf3 100644
> --- a/configs/puma-rk3399_defconfig
> +++ b/configs/puma-rk3399_defconfig
> @@ -39,7 +39,6 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
>   CONFIG_SPL_I2C=y
>   CONFIG_SPL_POWER=y
>   CONFIG_SPL_SPI_LOAD=y
> -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
>   CONFIG_TPL=y
>   CONFIG_CMD_BOOTZ=y
>   CONFIG_CMD_GPT=y
>