[PATCH v5 03/46] x86: Allow listing MTRRs in SPL

Simon Glass sjg at chromium.org
Sun Jul 16 05:38:36 CEST 2023


Move MTRR-listing code into a common file so it can be used from SPL.
Update the 'mtrr' command to call it.

Use this in SPL just before adjusting the MTRRs, so we can see the state
set up by the board. Only show it when debug is enabled.

Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
---

Changes in v5:
- Make mtrr_type_name[] static

 arch/x86/cpu/mtrr.c         | 61 +++++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/mtrr.h | 20 ++++++++++++
 arch/x86/lib/spl.c          |  7 +++++
 cmd/x86/mtrr.c              | 60 +++---------------------------------
 4 files changed, 92 insertions(+), 56 deletions(-)

diff --git a/arch/x86/cpu/mtrr.c b/arch/x86/cpu/mtrr.c
index c174dd9b3ad2..9c24ae984e90 100644
--- a/arch/x86/cpu/mtrr.c
+++ b/arch/x86/cpu/mtrr.c
@@ -30,6 +30,16 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static const char *const mtrr_type_name[MTRR_TYPE_COUNT] = {
+	"Uncacheable",
+	"Combine",
+	"2",
+	"3",
+	"Through",
+	"Protect",
+	"Back",
+};
+
 /* Prepare to adjust MTRRs */
 void mtrr_open(struct mtrr_state *state, bool do_caches)
 {
@@ -324,3 +334,54 @@ int mtrr_set(int cpu_select, int reg, u64 base, u64 mask)
 
 	return mtrr_start_op(cpu_select, &oper);
 }
+
+static void read_mtrrs_(void *arg)
+{
+	struct mtrr_info *info = arg;
+
+	mtrr_read_all(info);
+}
+
+int mtrr_list(int reg_count, int cpu_select)
+{
+	struct mtrr_info info;
+	int ret;
+	int i;
+
+	printf("Reg Valid Write-type   %-16s %-16s %-16s\n", "Base   ||",
+	       "Mask   ||", "Size   ||");
+	memset(&info, '\0', sizeof(info));
+	ret = mp_run_on_cpus(cpu_select, read_mtrrs_, &info);
+	if (ret)
+		return log_msg_ret("run", ret);
+	for (i = 0; i < reg_count; i++) {
+		const char *type = "Invalid";
+		u64 base, mask, size;
+		bool valid;
+
+		base = info.mtrr[i].base;
+		mask = info.mtrr[i].mask;
+		size = ~mask & ((1ULL << CONFIG_CPU_ADDR_BITS) - 1);
+		size |= (1 << 12) - 1;
+		size += 1;
+		valid = mask & MTRR_PHYS_MASK_VALID;
+		type = mtrr_type_name[base & MTRR_BASE_TYPE_MASK];
+		printf("%d   %-5s %-12s %016llx %016llx %016llx\n", i,
+		       valid ? "Y" : "N", type, base & ~MTRR_BASE_TYPE_MASK,
+		       mask & ~MTRR_PHYS_MASK_VALID, size);
+	}
+
+	return 0;
+}
+
+int mtrr_get_type_by_name(const char *typename)
+{
+	int i;
+
+	for (i = 0; i < MTRR_TYPE_COUNT; i++) {
+		if (*typename == *mtrr_type_name[i])
+			return i;
+	}
+
+	return -EINVAL;
+};
diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
index ca2edc7878f7..2e995f540616 100644
--- a/arch/x86/include/asm/mtrr.h
+++ b/arch/x86/include/asm/mtrr.h
@@ -190,6 +190,26 @@ int mtrr_set(int cpu_select, int reg, u64 base, u64 mask);
  */
 int mtrr_get_var_count(void);
 
+/**
+ * mtrr_list() - List the MTRRs
+ *
+ * Shows a list of all the MTRRs including their values
+ *
+ * @reg_count: Number of registers to show. You can use mtrr_get_var_count() for
+ * this
+ * @cpu_select: CPU to use. Use MP_SELECT_BSP for the boot CPU
+ * Returns: 0 if OK, -ve if the CPU was not found
+ */
+int mtrr_list(int reg_count, int cpu_select);
+
+/**
+ * mtrr_get_type_by_name() - Get the type of an MTRR given its type name
+ *
+ * @typename: Name to check
+ * Returns: MTRR type (MTRR_TYPE_...) or -EINVAL if invalid
+ */
+int mtrr_get_type_by_name(const char *typename);
+
 #endif
 
 #if ((CONFIG_XIP_ROM_SIZE & (CONFIG_XIP_ROM_SIZE - 1)) != 0)
diff --git a/arch/x86/lib/spl.c b/arch/x86/lib/spl.c
index ca1645f9d687..b9d23e6bfe18 100644
--- a/arch/x86/lib/spl.c
+++ b/arch/x86/lib/spl.c
@@ -19,6 +19,7 @@
 #include <asm/cpu_common.h>
 #include <asm/fsp2/fsp_api.h>
 #include <asm/global_data.h>
+#include <asm/mp.h>
 #include <asm/mrccache.h>
 #include <asm/mtrr.h>
 #include <asm/pci.h>
@@ -139,6 +140,12 @@ static int x86_spl_init(void)
 	arch_setup_gd(gd->new_gd);
 	gd->start_addr_sp = (ulong)ptr;
 
+	if (_LOG_DEBUG) {
+		ret = mtrr_list(mtrr_get_var_count(), MP_SELECT_BSP);
+		if (ret)
+			printf("mtrr_list failed\n");
+	}
+
 	/* Cache the SPI flash. Otherwise copying the code to RAM takes ages */
 	ret = mtrr_add_request(MTRR_TYPE_WRBACK,
 			       (1ULL << 32) - CONFIG_XIP_ROM_SIZE,
diff --git a/cmd/x86/mtrr.c b/cmd/x86/mtrr.c
index b1691d8b65ab..6ad7a123a447 100644
--- a/cmd/x86/mtrr.c
+++ b/cmd/x86/mtrr.c
@@ -10,71 +10,19 @@
 #include <asm/mp.h>
 #include <asm/mtrr.h>
 
-static const char *const mtrr_type_name[MTRR_TYPE_COUNT] = {
-	"Uncacheable",
-	"Combine",
-	"2",
-	"3",
-	"Through",
-	"Protect",
-	"Back",
-};
-
-static void read_mtrrs(void *arg)
-{
-	struct mtrr_info *info = arg;
-
-	mtrr_read_all(info);
-}
-
-static int do_mtrr_list(int reg_count, int cpu_select)
-{
-	struct mtrr_info info;
-	int ret;
-	int i;
-
-	printf("Reg Valid Write-type   %-16s %-16s %-16s\n", "Base   ||",
-	       "Mask   ||", "Size   ||");
-	memset(&info, '\0', sizeof(info));
-	ret = mp_run_on_cpus(cpu_select, read_mtrrs, &info);
-	if (ret)
-		return log_msg_ret("run", ret);
-	for (i = 0; i < reg_count; i++) {
-		const char *type = "Invalid";
-		uint64_t base, mask, size;
-		bool valid;
-
-		base = info.mtrr[i].base;
-		mask = info.mtrr[i].mask;
-		size = ~mask & ((1ULL << CONFIG_CPU_ADDR_BITS) - 1);
-		size |= (1 << 12) - 1;
-		size += 1;
-		valid = mask & MTRR_PHYS_MASK_VALID;
-		type = mtrr_type_name[base & MTRR_BASE_TYPE_MASK];
-		printf("%d   %-5s %-12s %016llx %016llx %016llx\n", i,
-		       valid ? "Y" : "N", type, base & ~MTRR_BASE_TYPE_MASK,
-		       mask & ~MTRR_PHYS_MASK_VALID, size);
-	}
-
-	return 0;
-}
-
 static int do_mtrr_set(int cpu_select, uint reg, int argc, char *const argv[])
 {
 	const char *typename = argv[0];
 	uint32_t start, size;
 	uint64_t base, mask;
-	int i, type = -1;
+	int type = -1;
 	bool valid;
 	int ret;
 
 	if (argc < 3)
 		return CMD_RET_USAGE;
-	for (i = 0; i < MTRR_TYPE_COUNT; i++) {
-		if (*typename == *mtrr_type_name[i])
-			type = i;
-	}
-	if (type == -1) {
+	type = mtrr_get_type_by_name(typename);
+	if (type < 0) {
 		printf("Invalid type name %s\n", typename);
 		return CMD_RET_USAGE;
 	}
@@ -146,7 +94,7 @@ static int do_mtrr(struct cmd_tbl *cmdtp, int flag, int argc,
 			if (!first)
 				printf("\n");
 			printf("CPU %d:\n", i);
-			ret = do_mtrr_list(reg_count, i);
+			ret = mtrr_list(reg_count, i);
 			if (ret) {
 				printf("Failed to read CPU %s (err=%d)\n",
 				       i < MP_SELECT_ALL ? simple_itoa(i) : "",
-- 
2.41.0.455.g037347b96a-goog



More information about the U-Boot mailing list