[PATCH v1 1/5] verdin-imx8mm/verdin-imx8mp: synchronise device trees with linux
Marcel Ziswiler
marcel at ziswiler.com
Tue Jul 11 11:09:14 CEST 2023
From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Synchronise device trees with linux v6.5-rc1.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
---
arch/arm/dts/imx8mm-mx8menlo.dts | 17 +--
arch/arm/dts/imx8mm-verdin-dahlia.dtsi | 150 ------------------------
arch/arm/dts/imx8mm-verdin-dev.dtsi | 97 ++++++++++++++-
arch/arm/dts/imx8mm-verdin.dtsi | 30 ++---
arch/arm/dts/imx8mp-verdin-dahlia.dtsi | 129 --------------------
arch/arm/dts/imx8mp-verdin-dev.dtsi | 125 +++++++++++++++++++-
arch/arm/dts/imx8mp-verdin-wifi.dtsi | 5 +
arch/arm/dts/imx8mp-verdin.dtsi | 91 +++++++++-----
board/toradex/verdin-imx8mm/MAINTAINERS | 1 -
board/toradex/verdin-imx8mp/MAINTAINERS | 1 -
10 files changed, 309 insertions(+), 337 deletions(-)
delete mode 100644 arch/arm/dts/imx8mm-verdin-dahlia.dtsi
delete mode 100644 arch/arm/dts/imx8mp-verdin-dahlia.dtsi
diff --git a/arch/arm/dts/imx8mm-mx8menlo.dts b/arch/arm/dts/imx8mm-mx8menlo.dts
index 32f6f2f50c1..0b123a84018 100644
--- a/arch/arm/dts/imx8mm-mx8menlo.dts
+++ b/arch/arm/dts/imx8mm-mx8menlo.dts
@@ -10,6 +10,7 @@
/ {
model = "MENLO MX8MM EMBEDDED DEVICE";
compatible = "menlo,mx8menlo",
+ "toradex,verdin-imx8mm-nonwifi",
"toradex,verdin-imx8mm",
"fsl,imx8mm";
@@ -250,21 +251,21 @@
/* SODIMM 96 */
MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x1c4
/* CPLD_D[7] */
- MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x1c4
+ MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x184
/* CPLD_D[6] */
- MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x1c4
+ MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x184
/* CPLD_D[5] */
- MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x1c4
+ MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x184
/* CPLD_D[4] */
- MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x1c4
+ MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x184
/* CPLD_D[3] */
- MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x1c4
+ MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x184
/* CPLD_D[2] */
- MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x1c4
+ MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x184
/* CPLD_D[1] */
- MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x1c4
+ MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x184
/* CPLD_D[0] */
- MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x1c4
+ MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x184
/* KBD_intK */
MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1c4
/* DISP_reset */
diff --git a/arch/arm/dts/imx8mm-verdin-dahlia.dtsi b/arch/arm/dts/imx8mm-verdin-dahlia.dtsi
deleted file mode 100644
index c2a5c2f7b20..00000000000
--- a/arch/arm/dts/imx8mm-verdin-dahlia.dtsi
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/ {
- sound_card: sound-card {
- compatible = "simple-audio-card";
- simple-audio-card,bitclock-master = <&dailink_master>;
- simple-audio-card,format = "i2s";
- simple-audio-card,frame-master = <&dailink_master>;
- simple-audio-card,name = "imx8mm-wm8904";
- simple-audio-card,routing =
- "Headphone Jack", "HPOUTL",
- "Headphone Jack", "HPOUTR",
- "IN2L", "Line In Jack",
- "IN2R", "Line In Jack",
- "Headphone Jack", "MICBIAS",
- "IN1L", "Headphone Jack";
- simple-audio-card,widgets =
- "Microphone", "Headphone Jack",
- "Headphone", "Headphone Jack",
- "Line", "Line In Jack";
-
- dailink_master: simple-audio-card,codec {
- clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
- sound-dai = <&wm8904_1a>;
- };
-
- simple-audio-card,cpu {
- sound-dai = <&sai2>;
- };
- };
-};
-
-/* Verdin SPI_1 */
-&ecspi2 {
- status = "okay";
-};
-
-/* EEPROM on display adapter boards */
-&eeprom_display_adapter {
- status = "okay";
-};
-
-/* EEPROM on Verdin Development board */
-&eeprom_carrier_board {
- status = "okay";
-};
-
-&fec1 {
- status = "okay";
-};
-
-/* Verdin QSPI_1 */
-&flexspi {
- status = "okay";
-};
-
-/* Current measurement into module VCC */
-&hwmon {
- status = "okay";
-};
-
-&hwmon_temp {
- vs-supply = <®_1p8v>;
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
-};
-
-/* Verdin I2C_1 */
-&i2c4 {
- status = "okay";
-
- /* Audio Codec */
- wm8904_1a: audio-codec at 1a {
- compatible = "wlf,wm8904";
- AVDD-supply = <®_3p3v>;
- clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
- clock-names = "mclk";
- CPVDD-supply = <®_3p3v>;
- DBVDD-supply = <®_3p3v>;
- DCVDD-supply = <®_3p3v>;
- MICVDD-supply = <®_3p3v>;
- reg = <0x1a>;
- #sound-dai-cells = <0>;
- };
-};
-
-/* Verdin PCIE_1 */
-&pcie0 {
- status = "okay";
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-/* Verdin PWM_3_DSI */
-&pwm1 {
- status = "okay";
-};
-
-/* Verdin PWM_1 */
-&pwm2 {
- status = "okay";
-};
-
-/* Verdin PWM_2 */
-&pwm3 {
- status = "okay";
-};
-
-/* Verdin I2S_1 */
-&sai2 {
- status = "okay";
-};
-
-/* Verdin UART_3 */
-&uart1 {
- status = "okay";
-};
-
-/* Verdin UART_1 */
-&uart2 {
- status = "okay";
-};
-
-/* Verdin UART_2 */
-&uart3 {
- status = "okay";
-};
-
-/* Verdin USB_1 */
-&usbotg1 {
- status = "okay";
-};
-
-/* Verdin USB_2 */
-&usbotg2 {
- status = "okay";
-};
-
-/* Verdin SD_1 */
-&usdhc2 {
- status = "okay";
-};
diff --git a/arch/arm/dts/imx8mm-verdin-dev.dtsi b/arch/arm/dts/imx8mm-verdin-dev.dtsi
index 73cc3fafa01..3c4b8ca125e 100644
--- a/arch/arm/dts/imx8mm-verdin-dev.dtsi
+++ b/arch/arm/dts/imx8mm-verdin-dev.dtsi
@@ -3,14 +3,13 @@
* Copyright 2022 Toradex
*/
-#include "imx8mm-verdin-dahlia.dtsi"
-
/ {
sound_card: sound-card {
compatible = "simple-audio-card";
simple-audio-card,bitclock-master = <&dailink_master>;
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,mclk-fs = <256>;
simple-audio-card,name = "imx8mm-nau8822";
simple-audio-card,routing =
"Headphones", "LHP",
@@ -41,27 +40,121 @@
};
};
+/* Verdin SPI_1 */
+&ecspi2 {
+ status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+ status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+ status = "okay";
+};
+
+&fec1 {
+ status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+ status = "okay";
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+ status = "okay";
+};
+
+&hwmon_temp {
+ vs-supply = <®_1p8v>;
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
&gpio_expander_21 {
status = "okay";
};
/* Verdin I2C_1 */
&i2c4 {
+ status = "okay";
+
/* Audio Codec */
nau8822_1a: audio-codec at 1a {
compatible = "nuvoton,nau8822";
reg = <0x1a>;
+ #sound-dai-cells = <0>;
};
};
+/* Verdin PCIE_1 */
+&pcie0 {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+ status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+ status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+ status = "okay";
+};
+
+/* Verdin I2S_1 */
+&sai2 {
+ status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+ status = "okay";
+};
+
/* Verdin UART_1, connector X50 through RS485 transceiver */
&uart2 {
linux,rs485-enabled-at-boot-time;
rs485-rts-active-low;
rs485-rx-during-tx;
+ status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+ status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+ disable-over-current;
+ status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+ disable-over-current;
+ status = "okay";
};
/* Limit frequency on dev board due to long traces and bad signal integrity */
&usdhc2 {
max-frequency = <100000000>;
+ status = "okay";
};
diff --git a/arch/arm/dts/imx8mm-verdin.dtsi b/arch/arm/dts/imx8mm-verdin.dtsi
index bcab830c6e9..6f081158714 100644
--- a/arch/arm/dts/imx8mm-verdin.dtsi
+++ b/arch/arm/dts/imx8mm-verdin.dtsi
@@ -3,8 +3,8 @@
* Copyright 2022 Toradex
*/
-#include "dt-bindings/phy/phy-imx8-pcie.h"
-#include "dt-bindings/pwm/pwm.h"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
#include "imx8mm.dtsi"
/ {
@@ -56,7 +56,11 @@
hdmi_connector: hdmi-connector {
compatible = "hdmi-connector";
ddc-i2c-bus = <&i2c2>;
+ /* Verdin PWM_3_DSI (SODIMM 19) */
+ hpd-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
label = "hdmi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm_3_dsi_hpd_gpio>;
type = "a";
status = "disabled";
};
@@ -95,9 +99,10 @@
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
- off-on-delay = <500000>;
+ off-on-delay-us = <500000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_eth>;
+ regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
@@ -134,7 +139,7 @@
enable-active-high;
/* Verdin SD_1_PWR_EN (SODIMM 76) */
gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
- off-on-delay = <100000>;
+ off-on-delay-us = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
regulator-max-microvolt = <3300000>;
@@ -183,15 +188,15 @@
ddrc_opp_table: opp-table {
compatible = "operating-points-v2";
- opp-25M {
+ opp-25000000 {
opp-hz = /bits/ 64 <25000000>;
};
- opp-100M {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
- opp-750M {
+ opp-750000000 {
opp-hz = /bits/ 64 <750000000>;
};
};
@@ -358,7 +363,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
reg = <0x25>;
- sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
/*
* The bootloader is expected to switch on the I2C level shifter for the TLA2024 ADC
@@ -598,7 +602,7 @@
hdmi_lontium_lt8912: hdmi at 48 {
compatible = "lontium,lt8912b";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_10_dsi>, <&pinctrl_pwm_3_dsi_hpd_gpio>;
+ pinctrl-0 = <&pinctrl_gpio_10_dsi>;
reg = <0x48>;
/* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */
/* Verdin GPIO_10_DSI (SODIMM 21) */
@@ -610,7 +614,7 @@
compatible = "atmel,maxtouch";
/*
* Verdin GPIO_9_DSI
- * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+ * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
*/
interrupt-parent = <&gpio3>;
interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
@@ -653,9 +657,6 @@
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
<&clk IMX8MM_SYS_PLL2_250M>;
assigned-clock-rates = <10000000>, <250000000>;
- clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
- <&clk IMX8MM_CLK_PCIE1_PHY>;
- clock-names = "pcie", "pcie_aux", "pcie_bus";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie0>;
/* PCIE_1_RESET# (SODIMM 244) */
@@ -664,6 +665,7 @@
&pcie_phy {
clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+ clock-names = "ref";
fsl,clkreq-unsupported;
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
fsl,tx-deemph-gen1 = <0x2d>;
@@ -739,7 +741,6 @@
adp-disable;
dr_mode = "otg";
hnp-disable;
- over-current-active-low;
samsung,picophy-dc-vol-level-adjust = <7>;
samsung,picophy-pre-emp-curr-control = <3>;
srp-disable;
@@ -749,7 +750,6 @@
/* Verdin USB_2 */
&usbotg2 {
dr_mode = "host";
- over-current-active-low;
samsung,picophy-dc-vol-level-adjust = <7>;
samsung,picophy-pre-emp-curr-control = <3>;
vbus-supply = <®_usb_otg2_vbus>;
diff --git a/arch/arm/dts/imx8mp-verdin-dahlia.dtsi b/arch/arm/dts/imx8mp-verdin-dahlia.dtsi
deleted file mode 100644
index 4b8f86f6308..00000000000
--- a/arch/arm/dts/imx8mp-verdin-dahlia.dtsi
+++ /dev/null
@@ -1,129 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/* TODO: Audio Codec */
-
-&backlight {
- power-supply = <®_3p3v>;
-};
-
-/* Verdin SPI_1 */
-&ecspi1 {
- status = "okay";
-};
-
-/* EEPROM on display adapter boards */
-&eeprom_display_adapter {
- status = "okay";
-};
-
-/* EEPROM on Verdin Development board */
-&eeprom_carrier_board {
- status = "okay";
-};
-
-&eqos {
- status = "okay";
-};
-
-&flexcan1 {
- status = "okay";
-};
-
-&flexcan2 {
- status = "okay";
-};
-
-/* Verdin QSPI_1 */
-&flexspi {
- status = "okay";
-};
-
-/* Current measurement into module VCC */
-&hwmon {
- status = "okay";
-};
-
-&hwmon_temp {
- vs-supply = <®_1p8v>;
- status = "okay";
-};
-
-/* Verdin I2C_2_DSI */
-&i2c2 {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
-};
-
-/* Verdin I2C_1 */
-&i2c4 {
- status = "okay";
-
- /* TODO: Audio Codec */
-};
-
-/* TODO: Verdin PCIE_1 */
-
-/* Verdin PWM_1 */
-&pwm1 {
- status = "okay";
-};
-
-/* Verdin PWM_2 */
-&pwm2 {
- status = "okay";
-};
-
-/* Verdin PWM_3_DSI */
-&pwm3 {
- status = "okay";
-};
-
-®_usdhc2_vmmc {
- vin-supply = <®_3p3v>;
-};
-
-/* TODO: Verdin I2S_1 */
-
-/* Verdin UART_1 */
-&uart1 {
- status = "okay";
-};
-
-/* Verdin UART_2 */
-&uart2 {
- status = "okay";
-};
-
-/* Verdin UART_3, used as the Linux Console */
-&uart3 {
- status = "okay";
-};
-
-/* Verdin USB_1 */
-&usb3_0 {
- status = "okay";
-};
-
-&usb3_phy0 {
- status = "okay";
-};
-
-/* Verdin USB_2 */
-&usb3_1 {
- status = "okay";
-};
-
-&usb3_phy1 {
- status = "okay";
-};
-
-/* Verdin SD_1 */
-&usdhc2 {
- status = "okay";
-};
diff --git a/arch/arm/dts/imx8mp-verdin-dev.dtsi b/arch/arm/dts/imx8mp-verdin-dev.dtsi
index cefabe65b25..bdfdd4c782f 100644
--- a/arch/arm/dts/imx8mp-verdin-dev.dtsi
+++ b/arch/arm/dts/imx8mp-verdin-dev.dtsi
@@ -3,8 +3,6 @@
* Copyright 2022 Toradex
*/
-#include "imx8mp-verdin-dahlia.dtsi"
-
/ {
/* TODO: Audio Codec */
@@ -12,7 +10,7 @@
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio_expander_21 4 GPIO_ACTIVE_HIGH>; /* ETH_PWR_EN */
- off-on-delay = <500000>;
+ off-on-delay-us = <500000>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "+V3.3_ETH";
@@ -21,16 +19,106 @@
};
};
+&backlight {
+ power-supply = <®_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+ status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+ status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+ status = "okay";
+};
+
+&eqos {
+ status = "okay";
+};
+
&fec {
phy-supply = <®_eth2phy>;
status = "okay";
};
+&flexcan1 {
+ status = "okay";
+};
+
+&flexcan2 {
+ status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+ status = "okay";
+};
+
&gpio_expander_21 {
status = "okay";
vcc-supply = <®_1p8v>;
};
+/* Current measurement into module VCC */
+&hwmon {
+ status = "okay";
+};
+
+&hwmon_temp {
+ vs-supply = <®_1p8v>;
+ status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+ status = "okay";
+
+ /* TODO: Audio Codec */
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+ status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+ status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+ status = "okay";
+};
+
+®_usdhc2_vmmc {
+ vin-supply = <®_3p3v>;
+};
+
/* TODO: Verdin I2C_1 with Audio Codec */
/* Verdin UART_1, connector X50 through RS485 transceiver */
@@ -38,9 +126,40 @@
linux,rs485-enabled-at-boot-time;
rs485-rts-active-low;
rs485-rx-during-tx;
+ status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+ status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux Console */
+&uart3 {
+ status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+ fsl,permanently-attached;
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
};
/* Limit frequency on dev board due to long traces and bad signal integrity */
&usdhc2 {
max-frequency = <100000000>;
+ status = "okay";
};
diff --git a/arch/arm/dts/imx8mp-verdin-wifi.dtsi b/arch/arm/dts/imx8mp-verdin-wifi.dtsi
index 36289c175e6..ef94f9a57e2 100644
--- a/arch/arm/dts/imx8mp-verdin-wifi.dtsi
+++ b/arch/arm/dts/imx8mp-verdin-wifi.dtsi
@@ -65,6 +65,11 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_bt_uart>;
status = "okay";
+
+ bluetooth {
+ compatible = "mrvl,88w8997";
+ max-speed = <921600>;
+ };
};
/* On-module Wi-Fi */
diff --git a/arch/arm/dts/imx8mp-verdin.dtsi b/arch/arm/dts/imx8mp-verdin.dtsi
index 7b712d1888e..e9e4fcb562f 100644
--- a/arch/arm/dts/imx8mp-verdin.dtsi
+++ b/arch/arm/dts/imx8mp-verdin.dtsi
@@ -3,7 +3,8 @@
* Copyright 2022 Toradex
*/
-#include "dt-bindings/pwm/pwm.h"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
#include "imx8mp.dtsi"
/ {
@@ -49,7 +50,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- button-wakeup {
+ key-wakeup {
debounce-interval = <10>;
/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
@@ -86,7 +87,7 @@
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
- off-on-delay = <500000>;
+ off-on-delay-us = <500000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_eth>;
regulator-always-on;
@@ -127,7 +128,7 @@
enable-active-high;
/* Verdin SD_1_PWR_EN (SODIMM 76) */
gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
- off-on-delay = <100000>;
+ off-on-delay-us = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
regulator-max-microvolt = <3300000>;
@@ -354,16 +355,6 @@
"SODIMM_82",
"SODIMM_70",
"SODIMM_72";
-
- ctrl-sleep-moci-hog {
- gpio-hog;
- /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
- gpios = <29 GPIO_ACTIVE_HIGH>;
- line-name = "CTRL_SLEEP_MOCI#";
- output-high;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
- };
};
&gpio3 {
@@ -432,6 +423,16 @@
"SODIMM_256",
"SODIMM_48",
"SODIMM_44";
+
+ ctrl-sleep-moci-hog {
+ gpio-hog;
+ /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+ gpios = <29 GPIO_ACTIVE_HIGH>;
+ line-name = "CTRL_SLEEP_MOCI#";
+ output-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+ };
};
/* On-module I2C */
@@ -452,7 +453,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
reg = <0x25>;
- sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
/*
* The bootloader is expected to switch on LDO4 for the on-module +V3.3_ADC and the
@@ -678,8 +678,8 @@
status = "disabled";
};
- lvds_ti_sn65dsi83: bridge at 2c {
- compatible = "ti,sn65dsi83";
+ lvds_ti_sn65dsi84: bridge at 2c {
+ compatible = "ti,sn65dsi84";
/* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
/* Verdin GPIO_10_DSI (SODIMM 21) */
enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
@@ -712,7 +712,7 @@
compatible = "atmel,maxtouch";
/*
* Verdin GPIO_9_DSI
- * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+ * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
*/
interrupt-parent = <&gpio4>;
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
@@ -748,7 +748,20 @@
};
};
-/* TODO: Verdin PCIE_1 */
+/* Verdin PCIE_1 */
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ /* PCIE_1_RESET# (SODIMM 244) */
+ reset-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_phy {
+ clocks = <&hsio_blk_ctrl>;
+ clock-names = "ref";
+ fsl,clkreq-unsupported;
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+};
/* Verdin PWM_1 */
&pwm1 {
@@ -806,28 +819,45 @@
};
/* Verdin USB_1 */
-&usb3_phy0 {
- vbus-supply = <®_usb1_vbus>;
+&usb3_0 {
+ fsl,disable-port-power-control;
+ fsl,over-current-active-low;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_1_oc_n>;
};
&usb_dwc3_0 {
+ /* dual role only, not full featured OTG */
adp-disable;
dr_mode = "otg";
hnp-disable;
maximum-speed = "high-speed";
- over-current-active-low;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_1_id>;
+ role-switch-default-mode = "peripheral";
srp-disable;
+ usb-role-switch;
+
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ label = "Type-C";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_1_id>;
+ self-powered;
+ type = "micro";
+ vbus-supply = <®_usb1_vbus>;
+ };
};
/* Verdin USB_2 */
+&usb3_1 {
+ fsl,disable-port-power-control;
+};
+
&usb3_phy1 {
vbus-supply = <®_usb2_vbus>;
};
&usb_dwc3_1 {
- disable-over-current;
dr_mode = "host";
};
@@ -1045,7 +1075,6 @@
pinctrl_gpio_hog3: gpiohog3grp {
fsl,pins =
- <MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x1c4>, /* SODIMM 157 */
/* CSI_1_MCLK */
<MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x1c4>; /* SODIMM 91 */
};
@@ -1220,7 +1249,7 @@
pinctrl_usb1_vbus: usb1vbusgrp {
fsl,pins =
- <MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR 0x19>; /* SODIMM 155 */
+ <MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x106>; /* SODIMM 155 */
};
/* USB_1_ID */
@@ -1229,9 +1258,15 @@
<MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x1c4>; /* SODIMM 161 */
};
+ /* USB_1_OC# */
+ pinctrl_usb_1_oc_n: usb1ocngrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x1c4>; /* SODIMM 157 */
+ };
+
pinctrl_usb2_vbus: usb2vbusgrp {
fsl,pins =
- <MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x19>; /* SODIMM 185 */
+ <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x106>; /* SODIMM 185 */
};
/* On-module Wi-Fi */
diff --git a/board/toradex/verdin-imx8mm/MAINTAINERS b/board/toradex/verdin-imx8mm/MAINTAINERS
index 974b3a10329..b0f4329253a 100644
--- a/board/toradex/verdin-imx8mm/MAINTAINERS
+++ b/board/toradex/verdin-imx8mm/MAINTAINERS
@@ -3,7 +3,6 @@ M: Marcel Ziswiler <marcel.ziswiler at toradex.com>
W: https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini
S: Maintained
F: arch/arm/dts/imx8mm-verdin.dtsi
-F: arch/arm/dts/imx8mm-verdin-dahlia.dtsi
F: arch/arm/dts/imx8mm-verdin-dev.dtsi
F: arch/arm/dts/imx8mm-verdin-wifi.dtsi
F: arch/arm/dts/imx8mm-verdin-wifi-dev.dts
diff --git a/board/toradex/verdin-imx8mp/MAINTAINERS b/board/toradex/verdin-imx8mp/MAINTAINERS
index cff3c503838..ea04a83926a 100644
--- a/board/toradex/verdin-imx8mp/MAINTAINERS
+++ b/board/toradex/verdin-imx8mp/MAINTAINERS
@@ -1,6 +1,5 @@
Verdin iMX8M Plus
F: arch/arm/dts/imx8mp-verdin.dtsi
-F: arch/arm/dts/imx8mp-verdin-dahlia.dtsi
F: arch/arm/dts/imx8mp-verdin-dev.dtsi
F: arch/arm/dts/imx8mp-verdin-wifi.dtsi
F: arch/arm/dts/imx8mp-verdin-wifi-dev.dts
--
2.36.1
More information about the U-Boot
mailing list