[PATCH 10/10] arm: dts: keystone-k2e-evm-u-boot: Remove usb1 mode configuration

[Roger Quadros]

Hi Julien,

On 06/07/2023 19:07, Julien Panis wrote:
> USB1 dual-role feature is already handled as peripheral only
> in dwc3-generic driver.
> 
> Signed-off-by: Julien Panis <jpanis at baylibre.com>
> ---
>  arch/arm/dts/keystone-k2e-evm-u-boot.dtsi | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/dts/keystone-k2e-evm-u-boot.dtsi b/arch/arm/dts/keystone-k2e-evm-u-boot.dtsi
> index 970d452f0804..a75f78377c28 100644
> --- a/arch/arm/dts/keystone-k2e-evm-u-boot.dtsi
> +++ b/arch/arm/dts/keystone-k2e-evm-u-boot.dtsi
> @@ -39,7 +39,6 @@
>  &usb1 {
>  	dwc3 at 25010000 {
>  		phys = <&usb1_phy>;
> -		dr_mode = "peripheral";
>  		snps,u2ss_inp3_quirk;
>  		status = "okay";
>  	};
> 

keystone-k2e.dtsi nor keystone-k2e-evm.dtsi has dr_mode set anywhere.
In Linux, keystone-k2e-evm.dtsi has dr_mode as "peripheral".
Can we please have the same in u-boot as well?

Then, from dwc3_generic_of_to_plat()

        plat->dr_mode = usb_get_dr_mode(node);
        if (plat->dr_mode == USB_DR_MODE_UNKNOWN) {
                /* might be a leaf so check the parent for mode */
                node = dev_ofnode(dev->parent);
                plat->dr_mode = usb_get_dr_mode(node);
                if (plat->dr_mode == USB_DR_MODE_UNKNOWN) {
                        pr_err("Invalid usb mode setup\n");
                        return -ENODEV;
                }
        }

I suppose that should be changed to OTG by default instead of
complaining that it's invalid.

FYI. From linux/devicetree/bindings/usb/usb-drd.yaml

  dr_mode:
    description:
      Tells Dual-Role USB controllers that we want to work on a particular
      mode. In case this attribute isn't passed via DT, USB DRD controllers
      should *default to OTG*.

-- 
cheers,
-roger