[PATCH v1 1/3] arm: k3: Fix ft_system_setup so it can be enabled on any SoC

[Francesco Dolcini]

On Wed, Jul 12, 2023 at 09:15:21AM -0500, Andrew Davis wrote:
> On 7/12/23 8:47 AM, Francesco Dolcini wrote:
> > From: Emanuele Ghidoli <emanuele.ghidoli at toradex.com>
> > 
> > ft_system_setup cannot be enabled on SoC without msmc sram otherwise
> > fdt_fixup_msmc_ram function fails causing system reset.
> > 
> > Fix by calling fdt_fixup_msmc_ram only on these specific SoC:
> > - J721S2
> > - AM654
> > - J721E
> > 
> > This change was verified to not change anything on any existing board
> > (all the J721S2, AM654 and J721E boards requires it,
> > none of the remaining k3 boards require it).
> > 
> > Fixes: 30e96a240156 ("arm: mach-k3: Move MSMC fixup to SoC level")
> > Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli at toradex.com>
> > Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>
> > ---
> >   arch/arm/mach-k3/common.c | 20 ++++++++++++--------
> >   1 file changed, 12 insertions(+), 8 deletions(-)
> > 
> > diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
> > index 34737a43aa08..f86ccaedc94f 100644
> > --- a/arch/arm/mach-k3/common.c
> > +++ b/arch/arm/mach-k3/common.c
> > @@ -433,14 +433,18 @@ int fdt_fixup_msmc_ram(void *blob, char *parent_path, char *node_name)
> >   #if defined(CONFIG_OF_SYSTEM_SETUP)
> >   int ft_system_setup(void *blob, struct bd_info *bd)
> 
> How about we rename this function to something like ft_msmc_sram_setup(), then only
> call it from board_setup for the platforms that needed it.

This is partially reverting what you did in commit
30e96a240156 ("arm: mach-k3: Move MSMC fixup to SoC level").

Is this fixup going to be required if tomorrow we have a new board using
the AM654 SoC (for example) or not? Depending on this answer we can
decide if ft_board_setup or ft_system_setup is the right function to use.

Francesco