[PATCH] net: ftgmac100: Add reset control

[Dylan Hung]

Add optional reset control, especially for the Aspeed SOC. For the
hardware without a reset line, the reset assertion/deassertion will be
skipped.

Signed-off-by: Dylan Hung <dylan_hung at aspeedtech.com>
---
 drivers/net/ftgmac100.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/ftgmac100.c b/drivers/net/ftgmac100.c
index a50cde338a..886b97119d 100644
--- a/drivers/net/ftgmac100.c
+++ b/drivers/net/ftgmac100.c
@@ -13,6 +13,7 @@
 
 #include <common.h>
 #include <clk.h>
+#include <reset.h>
 #include <cpu_func.h>
 #include <dm.h>
 #include <log.h>
@@ -90,6 +91,7 @@ struct ftgmac100_data {
 	u32 max_speed;
 
 	struct clk_bulk clks;
+	struct reset_ctl *reset_ctl;
 
 	/* End of RX/TX ring buffer bits. Depend on model */
 	u32 rxdes0_edorr_mask;
@@ -568,6 +570,8 @@ static int ftgmac100_of_to_plat(struct udevice *dev)
 		priv->txdes0_edotr_mask = BIT(15);
 	}
 
+	priv->reset_ctl = devm_reset_control_get_optional(dev, NULL);
+
 	return clk_get_bulk(dev, &priv->clks);
 }
 
@@ -593,6 +597,12 @@ static int ftgmac100_probe(struct udevice *dev)
 	if (ret)
 		goto out;
 
+	if (priv->reset_ctl) {
+		ret = reset_deassert(priv->reset_ctl);
+		if (ret)
+			goto out;
+	}
+
 	/*
 	 * If DM MDIO is enabled, the MDIO bus will be initialized later in
 	 * dm_eth_phy_connect
@@ -628,6 +638,8 @@ static int ftgmac100_remove(struct udevice *dev)
 	free(priv->phydev);
 	mdio_unregister(priv->bus);
 	mdio_free(priv->bus);
+	if (priv->reset_ctl)
+		reset_assert(priv->reset_ctl);
 	clk_release_bulk(&priv->clks);
 
 	return 0;
-- 
2.25.1