[PATCH 4/5] video: vesa: Use mtrr_set_next_var() for graphics memory

[Bin Meng]

At present this uses mtrr_add_request() & mtrr_commit() combination
to program the MTRR for graphics memory. This usage has two major
issues as below:

- mtrr_commit() will re-initialize all MTRR registers from index 0,
  using the settings previously added by mtrr_add_request() and saved
  in gd->arch.mtrr_req[], which won't cause any issue but is unnecessary
- The way such combination works is based on the assumption that U-Boot
  has full control with MTRR programming (e.g.: U-Boot without any blob
  that does all low-level initialization on its own, or using FSP2 which
  does not touch MTRR), but this is not the case with FSP. FSP programs
  some MTRRs during its execution but U-Boot does not have the settings
  saved in gd->arch.mtrr_req[] and when doing mtrr_commit() it will
  corrupt what was already programmed previously.

Correct this to use mtrr_set_next_var() instead.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---

 drivers/video/vesa.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/video/vesa.c b/drivers/video/vesa.c
index cac3bb0c33..50912c5c8b 100644
--- a/drivers/video/vesa.c
+++ b/drivers/video/vesa.c
@@ -23,8 +23,7 @@ static int vesa_video_probe(struct udevice *dev)
 
 	/* Use write-combining for the graphics memory, 256MB */
 	fbbase = IS_ENABLED(CONFIG_VIDEO_COPY) ? plat->copy_base : plat->base;
-	mtrr_add_request(MTRR_TYPE_WRCOMB, fbbase, 256 << 20);
-	mtrr_commit(true);
+	mtrr_set_next_var(MTRR_TYPE_WRCOMB, fbbase, 256 << 20);
 
 	return 0;
 }
-- 
2.34.1