[PATCH 05/16] board: traverse: ten64: specify bootargs for recovery environment

[Mathew McBride]

The recovery environment[1] on the Ten64 is a OpenWrt-
based ramdisk stored on the NAND intended to help with
system setup tasks.

Before the bootargs were not being set for the recovery
command, relying instead on the existing bootargs variable.

Ensure the bootargs are set correctly prior to booting recovery.

Signed-off-by: Mathew McBride <matt at traverse.com.au>

[1] https://ten64doc.traverse.com.au/software/recovery/
---
 include/configs/ten64.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/configs/ten64.h b/include/configs/ten64.h
index 63fbafd132..1b8b27c230 100644
--- a/include/configs/ten64.h
+++ b/include/configs/ten64.h
@@ -50,6 +50,7 @@
 	BOOTENV \
 	"load_efi_dtb=mtd read devicetree $fdt_addr_r && fdt addr $fdt_addr_r && " \
 	"fdt resize && fdt boardsetup\0" \
-	"bootcmd_recovery=mtd read recovery 0xa0000000; && bootm 0xa0000000#ten64\0"
+	"bootcmd_recovery=mtd read recovery 0xa0000000 && " \
+	"setenv bootargs \"earlycon root=/dev/ram0 ramdisk_size=0x3000000\" && bootm 0xa0000000#ten64\0"
 
 #endif /* __TEN64_H */
-- 
2.30.1