[PATCH v2 0/6] Support for AC5X NAND and AT-x240 board

Stefan Roese sr at denx.de
Thu Jul 13 15:57:53 CEST 2023


On 7/10/23 00:47, Chris Packham wrote:
> This series adds support for the NAND flash controller on the AC5X SoC
> and adds support for the Allied Telesis x240 board.
> 
> I've also included 2 unrelated changes. "arm: mvebu: Remove unused alias
> from RC AC5X dts" removes an unused alias from the dts. This was in the
> neighborhood of the x240 so I included it.
> 
> "mtd: nand: pxa3xx: Enable devbus/nand arbiter on Armada 8K" allows
> using the NFC and device bus at the same time. This is needed for
> another board (CN9130 based) that I'll hopefully get upstream in the
> near future. I figured I'd include it now since I was touching the NAND
> driver.
> 
> Chris Packham (6):
>    arm: mvebu: ac5: Add nand-controller node
>    arm: mvebu: ac5: Define mvebu_get_nand_clock()
>    mtd: nand: pxa3xx: Add support for the Marvell AC5 SoC
>    mtd: nand: pxa3xx: Enable devbus/nand arbiter on Armada 8K
>    arm: mvebu: Add Allied Telesis x240 board
>    arm: mvebu: Remove unused alias from RC AC5X dts

Applied to u-boot-marvell/master

Thanks,
Stefan


>   arch/arm/dts/Makefile                  |   3 +-
>   arch/arm/dts/ac5-98dx25xx.dtsi         |   9 ++
>   arch/arm/dts/ac5-98dx35xx-atl-x240.dts | 212 +++++++++++++++++++++++++
>   arch/arm/dts/ac5-98dx35xx-rd.dts       |   1 -
>   arch/arm/mach-mvebu/Kconfig            |   7 +
>   arch/arm/mach-mvebu/alleycat5/soc.c    |   6 +
>   board/alliedtelesis/x240/MAINTAINERS   |   7 +
>   board/alliedtelesis/x240/Makefile      |   6 +
>   board/alliedtelesis/x240/x240.c        |  13 ++
>   configs/x240_defconfig                 |  86 ++++++++++
>   drivers/mtd/nand/raw/pxa3xx_nand.c     |  20 ++-
>   include/configs/x240.h                 |  37 +++++
>   12 files changed, 401 insertions(+), 6 deletions(-)
>   create mode 100644 arch/arm/dts/ac5-98dx35xx-atl-x240.dts
>   create mode 100644 board/alliedtelesis/x240/MAINTAINERS
>   create mode 100644 board/alliedtelesis/x240/Makefile
>   create mode 100644 board/alliedtelesis/x240/x240.c
>   create mode 100644 configs/x240_defconfig
>   create mode 100644 include/configs/x240.h
> 

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list