[PATCH 04/20] pinctrl: sunxi: remove struct sunxi_gpio
Andre Przywara
andre.przywara at arm.com
Fri Jul 21 15:45:50 CEST 2023
So far every Allwinner SoC used the same basic pincontroller/GPIO
register frame, and just differed by the number of implemented banks and
pins, plus some special functionality from time to time. However the D1
and successors use a slightly different pinctrl register layout.
Use that opportunity to drop "struct sunxi_gpio", that described that
MMIO frame in a C struct. That approach is somewhat frowned upon in the
Linux world and rarely used there, though still popular with U-Boot.
Switching from a C struct to a "base address plus offset" approach allows
to switch between the two models more dynamically, without reverting to
preprocessor macros and #ifdef's.
Model the pinctrl MMIO register frame in the usual "base address +
offset" way, and replace a hard-to-parse CPP macro with a more readable
static function.
All the users get converted over. There are no functional changes at
this point, it just prepares the stages for the D1 and friends.
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
arch/arm/include/asm/arch-sunxi/gpio.h | 67 +++++++++++---------------
arch/arm/mach-sunxi/pinmux.c | 66 +++++++++++++------------
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 14 +++---
3 files changed, 71 insertions(+), 76 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index 26b7294f9c7..b12bdbd2739 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -28,13 +28,6 @@
#define SUNXI_GPIO_H 7
#define SUNXI_GPIO_I 8
-/*
- * This defines the number of GPIO banks for the _main_ GPIO controller.
- * You should fix up the padding in struct sunxi_gpio_reg below if you
- * change this.
- */
-#define SUNXI_GPIO_BANKS 9
-
/*
* sun6i/sun8i and later SoCs have an additional GPIO controller (R_PIO)
* at a different register offset.
@@ -52,46 +45,42 @@
#define SUNXI_GPIO_M 12
#define SUNXI_GPIO_N 13
-struct sunxi_gpio {
- u32 cfg[4];
- u32 dat;
- u32 drv[2];
- u32 pull[2];
-};
-
-/* gpio interrupt control */
-struct sunxi_gpio_int {
- u32 cfg[3];
- u32 ctl;
- u32 sta;
- u32 deb; /* interrupt debounce */
-};
-
-struct sunxi_gpio_reg {
- struct sunxi_gpio gpio_bank[SUNXI_GPIO_BANKS];
- u8 res[0xbc];
- struct sunxi_gpio_int gpio_int;
-};
-
#define SUN50I_H6_GPIO_POW_MOD_SEL 0x340
#define SUN50I_H6_GPIO_POW_MOD_VAL 0x348
-#define BANK_TO_GPIO(bank) (((bank) < SUNXI_GPIO_L) ? \
- &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \
- &((struct sunxi_gpio_reg *)SUNXI_R_PIO_BASE)->gpio_bank[(bank) - SUNXI_GPIO_L])
-
#define GPIO_BANK(pin) ((pin) >> 5)
#define GPIO_NUM(pin) ((pin) & 0x1f)
+#define GPIO_CFG_REG_OFFSET 0x00
#define GPIO_CFG_INDEX(pin) (((pin) & 0x1f) >> 3)
#define GPIO_CFG_OFFSET(pin) ((((pin) & 0x1f) & 0x7) << 2)
+#define GPIO_DAT_REG_OFFSET 0x10
+
+#define GPIO_DRV_REG_OFFSET 0x14
#define GPIO_DRV_INDEX(pin) (((pin) & 0x1f) >> 4)
#define GPIO_DRV_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1)
+#define GPIO_PULL_REG_OFFSET 0x1c
#define GPIO_PULL_INDEX(pin) (((pin) & 0x1f) >> 4)
#define GPIO_PULL_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1)
+#define SUNXI_PINCTRL_BANK_SIZE 0x24
+
+static inline void* BANK_TO_GPIO(int bank)
+{
+ void *pio_base;
+
+ if (bank < SUNXI_GPIO_L) {
+ pio_base = (void *)(uintptr_t)SUNXI_PIO_BASE;
+ } else {
+ pio_base = (void *)(uintptr_t)SUNXI_R_PIO_BASE;
+ bank -= SUNXI_GPIO_L;
+ }
+
+ return pio_base + bank * SUNXI_PINCTRL_BANK_SIZE;
+}
+
/* GPIO bank sizes */
#define SUNXI_GPIOS_PER_BANK 32
@@ -213,22 +202,22 @@ enum sunxi_gpio_number {
#define SUNXI_GPIO_AXP0_GPIO_COUNT 6
struct sunxi_gpio_plat {
- struct sunxi_gpio *regs;
+ void *regs;
char bank_name[3];
};
-void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val);
+void sunxi_gpio_set_cfgbank(void *bank_base, int pin_offset, u32 val);
void sunxi_gpio_set_cfgpin(u32 pin, u32 val);
-int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset);
+int sunxi_gpio_get_cfgbank(void *bank_base, int pin_offset);
int sunxi_gpio_get_cfgpin(u32 pin);
-void sunxi_gpio_set_output_bank(struct sunxi_gpio *pio, int pin, bool set);
+void sunxi_gpio_set_output_bank(void *bank_base, int pin, bool set);
void sunxi_gpio_set_output(u32 pin, bool set);
-int sunxi_gpio_get_output_bank(struct sunxi_gpio *pio, int pin);
+int sunxi_gpio_get_output_bank(void *bank_base, int pin);
int sunxi_gpio_get_output(u32 pin);
void sunxi_gpio_set_drv(u32 pin, u32 val);
-void sunxi_gpio_set_drv_bank(struct sunxi_gpio *pio, u32 bank_offset, u32 val);
+void sunxi_gpio_set_drv_bank(void *bank_base, u32 pin_offset, u32 val);
void sunxi_gpio_set_pull(u32 pin, u32 val);
-void sunxi_gpio_set_pull_bank(struct sunxi_gpio *pio, int bank_offset, u32 val);
+void sunxi_gpio_set_pull_bank(void *bank_base, int pin_offset, u32 val);
int sunxi_name_to_gpio(const char *name);
#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO
diff --git a/arch/arm/mach-sunxi/pinmux.c b/arch/arm/mach-sunxi/pinmux.c
index 751cac8e099..17d1a7bdb97 100644
--- a/arch/arm/mach-sunxi/pinmux.c
+++ b/arch/arm/mach-sunxi/pinmux.c
@@ -9,29 +9,30 @@
#include <asm/io.h>
#include <asm/arch/gpio.h>
-void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val)
+void sunxi_gpio_set_cfgbank(void *bank_base, int pin_offset, u32 val)
{
- u32 index = GPIO_CFG_INDEX(bank_offset);
- u32 offset = GPIO_CFG_OFFSET(bank_offset);
+ u32 index = GPIO_CFG_INDEX(pin_offset);
+ u32 offset = GPIO_CFG_OFFSET(pin_offset);
- clrsetbits_le32(&pio->cfg[index], 0xf << offset, val << offset);
+ clrsetbits_le32(bank_base + GPIO_CFG_REG_OFFSET + index * 4,
+ 0xfU << offset, val << offset);
}
void sunxi_gpio_set_cfgpin(u32 pin, u32 val)
{
u32 bank = GPIO_BANK(pin);
- struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+ void *pio = BANK_TO_GPIO(bank);
- sunxi_gpio_set_cfgbank(pio, pin, val);
+ sunxi_gpio_set_cfgbank(pio, pin % 32, val);
}
-int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset)
+int sunxi_gpio_get_cfgbank(void *bank_base, int pin_offset)
{
- u32 index = GPIO_CFG_INDEX(bank_offset);
- u32 offset = GPIO_CFG_OFFSET(bank_offset);
+ u32 index = GPIO_CFG_INDEX(pin_offset);
+ u32 offset = GPIO_CFG_OFFSET(pin_offset);
u32 cfg;
- cfg = readl(&pio->cfg[index]);
+ cfg = readl(bank_base + GPIO_CFG_REG_OFFSET + index * 4);
cfg >>= offset;
return cfg & 0xf;
@@ -40,35 +41,38 @@ int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset)
int sunxi_gpio_get_cfgpin(u32 pin)
{
u32 bank = GPIO_BANK(pin);
- struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+ void *bank_base = BANK_TO_GPIO(bank);
- return sunxi_gpio_get_cfgbank(pio, pin);
+ return sunxi_gpio_get_cfgbank(bank_base, pin % 32);
}
-void sunxi_gpio_set_output_bank(struct sunxi_gpio *pio, int pin, bool set)
+void sunxi_gpio_set_output_bank(void *bank_base, int pin, bool set)
{
u32 mask = 1U << GPIO_NUM(pin);
- clrsetbits_le32(&pio->dat, set ? 0 : mask, set ? mask : 0);
+ clrsetbits_le32(bank_base + GPIO_DAT_REG_OFFSET,
+ set ? 0 : mask, set ? mask : 0);
}
void sunxi_gpio_set_output(u32 pin, bool set)
{
u32 bank = GPIO_BANK(pin);
- struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+ void *pio = BANK_TO_GPIO(bank);
sunxi_gpio_set_output_bank(pio, pin, set);
}
-int sunxi_gpio_get_output_bank(struct sunxi_gpio *pio, int pin)
+int sunxi_gpio_get_output_bank(void *bank_base, int pin)
{
- return !!(readl(&pio->dat) & (1U << GPIO_NUM(pin)));
+ u32 mask = 1U << GPIO_NUM(pin);
+
+ return !!(readl(bank_base + GPIO_DAT_REG_OFFSET) & mask);
}
int sunxi_gpio_get_output(u32 pin)
{
u32 bank = GPIO_BANK(pin);
- struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+ void *pio = BANK_TO_GPIO(bank);
return sunxi_gpio_get_output_bank(pio, pin);
}
@@ -76,31 +80,33 @@ int sunxi_gpio_get_output(u32 pin)
void sunxi_gpio_set_drv(u32 pin, u32 val)
{
u32 bank = GPIO_BANK(pin);
- struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+ void *bank_base = BANK_TO_GPIO(bank);
- sunxi_gpio_set_drv_bank(pio, pin, val);
+ sunxi_gpio_set_drv_bank(bank_base, pin % 32, val);
}
-void sunxi_gpio_set_drv_bank(struct sunxi_gpio *pio, u32 bank_offset, u32 val)
+void sunxi_gpio_set_drv_bank(void *bank_base, u32 pin_offset, u32 val)
{
- u32 index = GPIO_DRV_INDEX(bank_offset);
- u32 offset = GPIO_DRV_OFFSET(bank_offset);
+ u32 index = GPIO_DRV_INDEX(pin_offset);
+ u32 offset = GPIO_DRV_OFFSET(pin_offset);
- clrsetbits_le32(&pio->drv[index], 0x3 << offset, val << offset);
+ clrsetbits_le32(bank_base + GPIO_DRV_REG_OFFSET + index * 4,
+ 0x3U << offset, val << offset);
}
void sunxi_gpio_set_pull(u32 pin, u32 val)
{
u32 bank = GPIO_BANK(pin);
- struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+ void *bank_base = BANK_TO_GPIO(bank);
- sunxi_gpio_set_pull_bank(pio, pin, val);
+ sunxi_gpio_set_pull_bank(bank_base, pin % 32, val);
}
-void sunxi_gpio_set_pull_bank(struct sunxi_gpio *pio, int bank_offset, u32 val)
+void sunxi_gpio_set_pull_bank(void *bank_base, int pin_offset, u32 val)
{
- u32 index = GPIO_PULL_INDEX(bank_offset);
- u32 offset = GPIO_PULL_OFFSET(bank_offset);
+ u32 index = GPIO_PULL_INDEX(pin_offset);
+ u32 offset = GPIO_PULL_OFFSET(pin_offset);
- clrsetbits_le32(&pio->pull[index], 0x3 << offset, val << offset);
+ clrsetbits_le32(bank_base + GPIO_PULL_REG_OFFSET + index * 4,
+ 0x3U << offset, val << offset);
}
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index e5102180902..946447e9136 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -35,7 +35,7 @@ struct sunxi_pinctrl_desc {
};
struct sunxi_pinctrl_plat {
- struct sunxi_gpio __iomem *base;
+ void __iomem *base;
};
static int sunxi_pinctrl_get_pins_count(struct udevice *dev)
@@ -86,8 +86,8 @@ static int sunxi_pinctrl_pinmux_set(struct udevice *dev, uint pin_selector,
sunxi_pinctrl_get_function_name(dev, func_selector),
desc->functions[func_selector].mux);
- sunxi_gpio_set_cfgbank(plat->base + bank, pin,
- desc->functions[func_selector].mux);
+ sunxi_gpio_set_cfgbank(plat->base + bank * SUNXI_PINCTRL_BANK_SIZE,
+ pin, desc->functions[func_selector].mux);
return 0;
}
@@ -102,7 +102,7 @@ static const struct pinconf_param sunxi_pinctrl_pinconf_params[] = {
static int sunxi_pinctrl_pinconf_set_pull(struct sunxi_pinctrl_plat *plat,
uint bank, uint pin, uint bias)
{
- struct sunxi_gpio *regs = &plat->base[bank];
+ void *regs = plat->base + bank * SUNXI_PINCTRL_BANK_SIZE;
sunxi_gpio_set_pull_bank(regs, pin, bias);
@@ -112,7 +112,7 @@ static int sunxi_pinctrl_pinconf_set_pull(struct sunxi_pinctrl_plat *plat,
static int sunxi_pinctrl_pinconf_set_drive(struct sunxi_pinctrl_plat *plat,
uint bank, uint pin, uint drive)
{
- struct sunxi_gpio *regs = &plat->base[bank];
+ void *regs = plat->base + bank * SUNXI_PINCTRL_BANK_SIZE;
if (drive < 10 || drive > 40)
return -EINVAL;
@@ -148,7 +148,7 @@ static int sunxi_pinctrl_get_pin_muxing(struct udevice *dev, uint pin_selector,
struct sunxi_pinctrl_plat *plat = dev_get_plat(dev);
int bank = pin_selector / SUNXI_GPIOS_PER_BANK;
int pin = pin_selector % SUNXI_GPIOS_PER_BANK;
- int mux = sunxi_gpio_get_cfgbank(plat->base + bank, pin);
+ int mux = sunxi_gpio_get_cfgbank(plat->base + bank * SUNXI_PINCTRL_BANK_SIZE, pin);
switch (mux) {
case SUNXI_GPIO_INPUT:
@@ -206,7 +206,7 @@ static int sunxi_pinctrl_bind(struct udevice *dev)
if (!gpio_plat)
return -ENOMEM;
- gpio_plat->regs = plat->base + i;
+ gpio_plat->regs = plat->base + i * SUNXI_PINCTRL_BANK_SIZE;
gpio_plat->bank_name[0] = 'P';
gpio_plat->bank_name[1] = 'A' + desc->first_bank + i;
gpio_plat->bank_name[2] = '\0';
--
2.35.8
More information about the U-Boot
mailing list