[PATCH v2 5/5] rockchip: rockpro64: Build u-boot-rockchip-spi.bin

[Peter Robinson]

Hi Jonas,

This regresses the Rockpro64 build for me when building with gcc 12/13
with the following error, if I remove CONFIG_LTO it builds, but
overlaps.

/usr/bin/aarch64-linux-gnu-ld:
/usr/lib/gcc/aarch64-linux-gnu/13/libgcc.a(lse-init.o): in function
`init_have_lse_atomics':
/builddir/build/BUILD/gcc-13.1.1-20230519/aarch64-linux-gnu/aarch64-linux-gnu/libgcc/../../../gcc-13.1.1-20230519/libgcc/config/aarch64/lse-init.c:46:
undefined reference to `__getauxval'
collect2: fatal error: ld terminated with signal 11 [Segmentation
fault], core dumped
compilation terminated.

Peter

On Wed, May 17, 2023 at 7:41 PM Jonas Karlman <jonas at kwiboo.se> wrote:
>
> Enable CONFIG_ROCKCHIP_SPI_IMAGE to build u-boot-rockchip-spi.bin.
> Define CONFIG_SYS_SPI_U_BOOT_OFFS to write u-boot.itb at the expected
> offset. Enable CONFIG_LTO to reduce size of SPL so that the mkimage
> output fit before the 0x60000 offset in u-boot-rockchip-spi.bin.
>
>   => sf probe
>   SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
>   => load mmc 1:1 10000000 u-boot-rockchip-spi.bin
>   1442304 bytes read in 27 ms (50.9 MiB/s)
>   => sf update $fileaddr 0 $filesize
>   device 0 offset 0x0, size 0x160200
>   1421824 bytes written, 20480 bytes skipped in 9.501s, speed 155432 B/s
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
> Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
> ---
> v2:
> - Collect r-b tag
>
>  configs/rockpro64-rk3399_defconfig | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
> index 0ca2cecade25..f41c03067903 100644
> --- a/configs/rockpro64-rk3399_defconfig
> +++ b/configs/rockpro64-rk3399_defconfig
> @@ -11,6 +11,7 @@ CONFIG_ENV_OFFSET=0x3F8000
>  CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64"
>  CONFIG_DM_RESET=y
>  CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_ROCKCHIP_SPI_IMAGE=y
>  CONFIG_TARGET_ROCKPRO64_RK3399=y
>  CONFIG_SPL_STACK=0x400000
>  CONFIG_DEBUG_UART_BASE=0xFF1A0000
> @@ -20,6 +21,7 @@ CONFIG_SPL_SPI=y
>  CONFIG_SYS_LOAD_ADDR=0x800800
>  CONFIG_PCI=y
>  CONFIG_DEBUG_UART=y
> +CONFIG_LTO=y
>  CONFIG_SPL_FIT_SIGNATURE=y
>  CONFIG_BOOTSTAGE=y
>  CONFIG_BOOTSTAGE_REPORT=y
> @@ -37,6 +39,7 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000
>  CONFIG_SPL_STACK_R=y
>  CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
>  CONFIG_SPL_SPI_LOAD=y
> +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
>  CONFIG_TPL=y
>  CONFIG_CMD_BOOTZ=y
>  CONFIG_CMD_GPT=y
> --
> 2.40.1
>