[PATCH v6 0/3] Add StarFive JH7110 PCIe drvier support

[Leo Liang]

Hi Minda,

On Thu, Jun 01, 2023 at 09:07:14AM +0800, Minda Chen wrote:
> 
> Hi Rick and Leo
> Could you review these series patches? Thanks.
> Since patch 1 was acked by Pali， Does it mean patch 1 is accepted？ 

I think acked-by means that the patch is considered good enough to be merged.

Aside from that, your patchset caused CI error by enabling the RTL8169 driver.
Could you take a look at it ? (https://source.denx.de/u-boot/custodians/u-boot-riscv/-/jobs/638021)
It's mostly compilation warnings that are being treated as errors.
The patchset looks good to me, I could merge the patchset as soon as the CI errors are fixed!

Thanks & best regards,
Leo

> On 2023/5/9 16:26, Minda Chen wrote:
> > These PCIe series patches are based on the JH7110 RISC-V SoC and VisionFive V2 board.
> > 
> > The PCIe driver depends on gpio, pinctrl, clk and reset driver to do init.
> > The PCIe dts configuation includes all these setting.
> > 
> > The PCIe drivers codes has been tested on the VisionFive V2 boards.
> > The test devices includes M.2 NVMe SSD and Realtek 8169 Ethernet adapter.
> > 
> > previous patch version
> > 
> > v1: https://patchwork.ozlabs.org/project/uboot/cover/20230223105240.15180-1-minda.chen@starfivetech.com/
> > v2: https://patchwork.ozlabs.org/project/uboot/cover/20230308054833.95730-1-minda.chen@starfivetech.com/
> > v3: https://patchwork.ozlabs.org/project/uboot/cover/20230329100143.10724-1-minda.chen@starfivetech.com/
> > v4: https://patchwork.ozlabs.org/project/uboot/cover/20230411010209.76561-1-minda.chen@starfivetech.com/
> > v5: https://patchwork.ozlabs.org/project/uboot/cover/20230423105859.125764-1-minda.chen@starfivetech.com/
> > 
> > changes
> >   v6
> >    patch 2
> >     1. Change one VisionFive2 config file.
> >    patch 3
> >     1. remove the pcie interrupt-controller. interrupts setting revert to origin.
> > 
> > setting.
> >   v5
> >    patch 1
> >     1. split PLDA controller driver codes to pcie_plda_common.c
> >     2. correct the codes of record secondary number. 
> >    patch 3
> >     1. change the pcie dtsi config. make them the same with kernel.
> >  
> >   v4
> >    patch 1
> >     1. Remove the IDS_REVISION_ID macros.
> >     2. Replace sec_busno to first_busno in starfive_pcie
> >     3. Remove starfive_pcie_off_conf function.
> >     4. Replace "imply" to "depends on" in PCIe Kconfig.
> >     5 .Check sec_busno in starfive_pcie_addr_valid.
> >  
> >   v3
> >    patch 1
> >     1. remove the read vendor ID delay
> >     2. remove starfive_pcie_hide_rc_bar function. do not hide host
> > bridge BAR write.
> >     3. Using PCIE_ECAM_OFFSET and PCI_CLASS_BRIDGE_PCI_NORMAL macros.
> >     4. Add comments for bus and address limitation reason in function
> >        starfive_pcie_addr_valid
> >     5. Change the multiple line comments in Line 373
> >     6. Using gpio_request_by_name to get PCIe reset gpio,and using
> >        dm_gpio_set_value set GPIO value.
> >   patch 2
> >     1. support PCIeboth 12a and 13b vf2 board.  
> >   patch 3
> >     1. reset dts change to reset-gpio.
> > 
> >   v2
> >    1. remove clock commit. The pcie clocks change has been includeded in [1].
> >    2. Using GENMASK marco1 in patch1.
> >    3. remove the syscon dts node in patch3. The syscon dts dts node has been
> >       included in [1]. 
> > 
> > 
> > Mason Huo (3):
> >   starfive: pci: Add StarFive JH7110 pcie driver
> >   configs: starfive-jh7110: Add support for PCIe host driver
> >   riscv: dts: starfive: Enable PCIe host controller
> > 
> >  .../dts/jh7110-starfive-visionfive-2.dtsi     |  11 +
> >  arch/riscv/dts/jh7110.dtsi                    |  74 ++++
> >  configs/starfive_visionfive2_defconfig        |  10 +
> >  drivers/pci/Kconfig                           |  13 +
> >  drivers/pci/Makefile                          |   2 +
> >  drivers/pci/pcie_plda_common.c                | 116 +++++++
> >  drivers/pci/pcie_plda_common.h                | 118 +++++++
> >  drivers/pci/pcie_starfive_jh7110.c            | 317 ++++++++++++++++++
> >  8 files changed, 661 insertions(+)
> >  create mode 100644 drivers/pci/pcie_plda_common.c
> >  create mode 100644 drivers/pci/pcie_plda_common.h
> >  create mode 100644 drivers/pci/pcie_starfive_jh7110.c
> > 
> > 
> > base-commit: c9c2c95d4cd27fe0cd41fe13a863899d268f973c