[PATCH v6 0/3] Add StarFive JH7110 PCIe drvier support

Minda Chen minda.chen at starfivetech.com
Fri Jun 16 11:34:12 CEST 2023



On 2023/6/16 16:42, Leo Liang wrote:
> Hi Minda,
> 
> On Thu, Jun 01, 2023 at 09:07:14AM +0800, Minda Chen wrote:
>> 
>> Hi Rick and Leo
>> Could you review these series patches? Thanks.
>> Since patch 1 was acked by Pali, Does it mean patch 1 is accepted? 
> 
> I think acked-by means that the patch is considered good enough to be merged.
> 
> Aside from that, your patchset caused CI error by enabling the RTL8169 driver.
> Could you take a look at it ? (https://source.denx.de/u-boot/custodians/u-boot-riscv/-/jobs/638021)
> It's mostly compilation warnings that are being treated as errors.
> The patchset looks good to me, I could merge the patchset as soon as the CI errors are fixed!
> 
> Thanks & best regards,
> Leo
> 
Thanks. I will commit another patch to fix the warning.
 
>> On 2023/5/9 16:26, Minda Chen wrote:
>> > These PCIe series patches are based on the JH7110 RISC-V SoC and VisionFive V2 board.
>> > 
>> > The PCIe driver depends on gpio, pinctrl, clk and reset driver to do init.
>> > The PCIe dts configuation includes all these setting.
>> > 
>> > The PCIe drivers codes has been tested on the VisionFive V2 boards.
>> > The test devices includes M.2 NVMe SSD and Realtek 8169 Ethernet adapter.
>> > 
>> > previous patch version
>> > 
>> > v1: https://patchwork.ozlabs.org/project/uboot/cover/20230223105240.15180-1-minda.chen@starfivetech.com/
>> > v2: https://patchwork.ozlabs.org/project/uboot/cover/20230308054833.95730-1-minda.chen@starfivetech.com/
>> > v3: https://patchwork.ozlabs.org/project/uboot/cover/20230329100143.10724-1-minda.chen@starfivetech.com/
>> > v4: https://patchwork.ozlabs.org/project/uboot/cover/20230411010209.76561-1-minda.chen@starfivetech.com/
>> > v5: https://patchwork.ozlabs.org/project/uboot/cover/20230423105859.125764-1-minda.chen@starfivetech.com/
>> > 
>> > changes
>> >   v6
>> >    patch 2
>> >     1. Change one VisionFive2 config file.
>> >    patch 3
>> >     1. remove the pcie interrupt-controller. interrupts setting revert to origin.
>> > 
>> > setting.
>> >   v5
>> >    patch 1
>> >     1. split PLDA controller driver codes to pcie_plda_common.c
>> >     2. correct the codes of record secondary number. 
>> >    patch 3
>> >     1. change the pcie dtsi config. make them the same with kernel.
>> >  
>> >   v4
>> >    patch 1
>> >     1. Remove the IDS_REVISION_ID macros.
>> >     2. Replace sec_busno to first_busno in starfive_pcie
>> >     3. Remove starfive_pcie_off_conf function.
>> >     4. Replace "imply" to "depends on" in PCIe Kconfig.
>> >     5 .Check sec_busno in starfive_pcie_addr_valid.
>> >  
>> >   v3
>> >    patch 1
>> >     1. remove the read vendor ID delay
>> >     2. remove starfive_pcie_hide_rc_bar function. do not hide host
>> > bridge BAR write.
>> >     3. Using PCIE_ECAM_OFFSET and PCI_CLASS_BRIDGE_PCI_NORMAL macros.
>> >     4. Add comments for bus and address limitation reason in function
>> >        starfive_pcie_addr_valid
>> >     5. Change the multiple line comments in Line 373
>> >     6. Using gpio_request_by_name to get PCIe reset gpio,and using
>> >        dm_gpio_set_value set GPIO value.
>> >   patch 2
>> >     1. support PCIeboth 12a and 13b vf2 board.  
>> >   patch 3
>> >     1. reset dts change to reset-gpio.
>> > 
>> >   v2
>> >    1. remove clock commit. The pcie clocks change has been includeded in [1].
>> >    2. Using GENMASK marco1 in patch1.
>> >    3. remove the syscon dts node in patch3. The syscon dts dts node has been
>> >       included in [1]. 
>> > 
>> > 
>> > Mason Huo (3):
>> >   starfive: pci: Add StarFive JH7110 pcie driver
>> >   configs: starfive-jh7110: Add support for PCIe host driver
>> >   riscv: dts: starfive: Enable PCIe host controller
>> > 
>> >  .../dts/jh7110-starfive-visionfive-2.dtsi     |  11 +
>> >  arch/riscv/dts/jh7110.dtsi                    |  74 ++++
>> >  configs/starfive_visionfive2_defconfig        |  10 +
>> >  drivers/pci/Kconfig                           |  13 +
>> >  drivers/pci/Makefile                          |   2 +
>> >  drivers/pci/pcie_plda_common.c                | 116 +++++++
>> >  drivers/pci/pcie_plda_common.h                | 118 +++++++
>> >  drivers/pci/pcie_starfive_jh7110.c            | 317 ++++++++++++++++++
>> >  8 files changed, 661 insertions(+)
>> >  create mode 100644 drivers/pci/pcie_plda_common.c
>> >  create mode 100644 drivers/pci/pcie_plda_common.h
>> >  create mode 100644 drivers/pci/pcie_starfive_jh7110.c
>> > 
>> > 
>> > base-commit: c9c2c95d4cd27fe0cd41fe13a863899d268f973c


More information about the U-Boot mailing list