[PATCH RFC u-boot-mvebu 0/6] arm: mvebu: Fix boot mode detection

Stefan Roese sr at denx.de
Mon Mar 6 07:17:50 CET 2023

Hi Pali,

On 3/4/23 11:50, Pali Rohár wrote:
> Improve code for checking strapping pins which specifies boot mode source.
> Martin, could you test if Clearfog can be still configured into UART
> booting mode via HW switches and if it still works correctly? First
> patch is reverting UART related commit for Clearfog which I think it not
> needed anymore.
> Also could you check if SATA booting is still working correctly?
> Tony, should address problems with SPI booting when it is configured to
> different configuration. In fourth commit I added all possible boot mode
> strapping pin configurations which are recognized by A385 bootrom (and
> not the only one described in the HW spec, which is incomplete).
> Stefan, do you have some AXP board with SATA boot source? Because I'm
> adding it for completeness in the last sixth patch.

No, theadorable only boots from SPI NOR.


More information about the U-Boot mailing list