[PATCH RFC u-boot-mvebu 0/6] arm: mvebu: Fix boot mode detection

[Pali Rohár]

On Saturday 04 March 2023 11:50:30 Pali Rohár wrote:
> Improve code for checking strapping pins which specifies boot mode source.
> 
> Martin, could you test if Clearfog can be still configured into UART
> booting mode via HW switches and if it still works correctly? First
> patch is reverting UART related commit for Clearfog which I think it not
> needed anymore.
> 
> Also could you check if SATA booting is still working correctly?
> 
> Tony, should address problems with SPI booting when it is configured to
> different configuration. In fourth commit I added all possible boot mode
> strapping pin configurations which are recognized by A385 bootrom (and
> not the only one described in the HW spec, which is incomplete).
> 
> Stefan, do you have some AXP board with SATA boot source? Because I'm
> adding it for completeness in the last sixth patch.
> 
> Pali Rohár (6):
>   arm: mvebu: Remove A38x BOOT_FROM_UART_ALT 0x3f constant
>   arm: mvebu: Remove A38x BOOT_FROM_SATA 0x22 constant
>   arm: mvebu: Convert BOOT_FROM_* constants to function macros
>   arm: mvebu: Define all options for A38x BOOT_FROM_* macros
>   arm: mvebu: Define all BOOTROM_ERR_MODE_* macros
>   arm: mvebu: Define all options for AXP BOOT_FROM_* macros
> 
>  arch/arm/mach-mvebu/cpu.c              | 20 ++++++-------
>  arch/arm/mach-mvebu/include/mach/soc.h | 41 ++++++++++++++++----------
>  2 files changed, 35 insertions(+), 26 deletions(-)
> 
> -- 
> 2.20.1
> 

Is something else needed to do with this patch series?

Because the discussion in this patch thread just pointed to different
issues, not related this this patch series.