[PATCH 30/33] doc: boards: amlogic: add documentation for BananaPi CM4IO

[neil.armstrong at linaro.org]

On 20/03/2023 13:23, Christian Hewitt wrote:
> 
>> On 20 Mar 2023, at 4:13 pm, Neil Armstrong <neil.armstrong at linaro.org> wrote:
>>
>> On 20/03/2023 12:46, Christian Hewitt wrote:
>>> Add build instructions for the BananaPi BPI-CM4IO carrier board with
>>> BPI-CM4 module.
>>> Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
>>> ---
>>>   board/amlogic/u200/MAINTAINERS       |   1 -
>>>   board/amlogic/w400/MAINTAINERS       |   2 +
>>>   doc/board/amlogic/bananapi-cm4io.rst | 152 +++++++++++++++++++++++++++
>>>   doc/board/amlogic/index.rst          |   1 +
>>>   4 files changed, 155 insertions(+), 1 deletion(-)
>>>   create mode 100644 doc/board/amlogic/bananapi-cm4io.rst
>>
>> <snip>
>>
>>> +
>>> +U-Boot Signing with Pre-Built FIP repo
>>> +--------------------------------------
>>> +
>>> +.. code-block:: bash
>>> +    $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
>>> +    $ cd amlogic-boot-fip
>>> +    $ mkdir my-output-dir
>>> +    $ ./build-fip.sh bananapi-cm4io /path/to/u-boot/u-boot.bin my-output-dir
>>
>>
>> This should be bananapi-m2s since the same is used, or we should duplicate it for cm4io/cm4.
> 
> https://github.com/LibreELEC/amlogic-boot-fip/tree/master/bananapi-cm4io
> 
> ^ It’s the same FIPs that were submitted for M2S but for packaging
> reasons I cloned them (users struggle to find images not explicitly
> named for their board). I’ll submit patches for the M2S and M2-Pro
> boards once this series is accepted (hopefully).

Ack, so no changes needed then !

> 
> Christian