[PATCH v2 u-boot-mvebu] arm: mvebu: Cleanup get_boot_device() code
Stefan Roese
sr at denx.de
Thu Mar 30 10:26:39 CEST 2023
On 3/27/23 23:11, Pali Rohár wrote:
> Show correct information in debug() output and use correct names for variables.
>
> No functional change.
>
> Signed-off-by: Pali Rohár <pali at kernel.org>
Applied to u-boot-marvell/next
Thanks,
Stefan
> ---
> arch/arm/mach-mvebu/cpu.c | 15 ++++++++++-----
> 1 file changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c
> index 56999f608a38..8b91e174c4c1 100644
> --- a/arch/arm/mach-mvebu/cpu.c
> +++ b/arch/arm/mach-mvebu/cpu.c
> @@ -67,6 +67,10 @@ u32 get_boot_device(void)
> {
> u32 val;
> u32 boot_device;
> + u32 boot_err_mode;
> +#ifdef CONFIG_ARMADA_38X
> + u32 boot_err_code;
> +#endif
>
> /*
> * First check, if UART boot-mode is active. This can only
> @@ -74,9 +78,9 @@ u32 get_boot_device(void)
> * MSB marks if the UART mode is active.
> */
> val = readl(BOOTROM_ERR_REG);
> - boot_device = (val & BOOTROM_ERR_MODE_MASK) >> BOOTROM_ERR_MODE_OFFS;
> - debug("BOOTROM_REG=0x%08x boot_device=0x%x\n", val, boot_device);
> - if (boot_device == BOOTROM_ERR_MODE_UART)
> + boot_err_mode = (val & BOOTROM_ERR_MODE_MASK) >> BOOTROM_ERR_MODE_OFFS;
> + debug("BOOTROM_ERR_REG=0x%08x boot_err_mode=0x%x\n", val, boot_err_mode);
> + if (boot_err_mode == BOOTROM_ERR_MODE_UART)
> return BOOT_DEVICE_UART;
>
> #ifdef CONFIG_ARMADA_38X
> @@ -84,8 +88,9 @@ u32 get_boot_device(void)
> * If the bootrom error code contains any other than zeros it's an
> * error condition and the bootROM has fallen back to UART boot
> */
> - boot_device = (val & BOOTROM_ERR_CODE_MASK) >> BOOTROM_ERR_CODE_OFFS;
> - if (boot_device)
> + boot_err_code = (val & BOOTROM_ERR_CODE_MASK) >> BOOTROM_ERR_CODE_OFFS;
> + debug("boot_err_code=0x%x\n", boot_err_code);
> + if (boot_err_code)
> return BOOT_DEVICE_UART;
> #endif
>
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
More information about the U-Boot
mailing list