[PATCH] net: phy: Request rgmii-id phy reset gpio as output

[Stefan Herbrechtsmeier]

From: Stefan Herbrechtsmeier <stefan.herbrechtsmeier at weidmueller.com>

Request the reset gpio of the rgmii-id phy as output to be consistent
with the eth-phy-uclass driver.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier at weidmueller.com>
---

 drivers/net/phy/ethernet_id.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/ethernet_id.c b/drivers/net/phy/ethernet_id.c
index 8864f99bb3..a715e83db9 100644
--- a/drivers/net/phy/ethernet_id.c
+++ b/drivers/net/phy/ethernet_id.c
@@ -39,7 +39,7 @@ struct phy_device *phy_connect_phy_id(struct mii_dev *bus, struct udevice *dev,
 
 	if (!IS_ENABLED(CONFIG_DM_ETH_PHY)) {
 		ret = gpio_request_by_name_nodev(node, "reset-gpios", 0, &gpio,
-						 GPIOD_ACTIVE_LOW);
+						 GPIOD_IS_OUT | GPIOD_ACTIVE_LOW);
 		if (!ret) {
 			assert = ofnode_read_u32_default(node,
 							 "reset-assert-us", 0);
-- 
2.30.2