[PATCH 4/4] usb: gadget: ether: Handle gadget driver registration in probe and remove

Marek Vasut marex at denx.de
Wed May 17 03:55:24 CEST 2023


Move the ethernet gadget driver registration and removal from ethernet
bind and unbind callbacks into driver DM probe and remove callbacks.
This way, when the driver is bound, which is triggered deliberately
using 'bind' command, the USB ethernet gadget driver is instantiated
and bound to the matching UDC. In reverse, when the driver is unbound,
which is again triggered deliberately using 'unbind' command, the USB
ethernet gadget driver instance is removed.

Effectively, this now behaves like running either 'ums' or 'dfu' or
any other commands utilizing USB gadget functionality.

This also drops use of usb_gadget_initialize()/usb_gadget_release(),
which are helper functions implemented in the UDC uclass to bind and
unbind UDC drivers to controllers from U-Boot command line. Those have
no place in drivers.

Signed-off-by: Marek Vasut <marex at denx.de>
---
NOTE: This must be thoroughly tested.
---
Cc: Kevin Hilman <khilman at baylibre.com>
Cc: Lukasz Majewski <lukma at denx.de>
Cc: Marek Vasut <marex at denx.de>
Cc: Simon Glass <sjg at chromium.org>
---
 drivers/usb/gadget/ether.c | 95 ++++++++++++++++++++------------------
 1 file changed, 51 insertions(+), 44 deletions(-)

diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 2040b5b5081..55853fa98fd 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -2281,49 +2281,8 @@ static int usb_eth_start(struct udevice *udev)
 	struct eth_dev *dev = &priv->ethdev;
 	struct usb_gadget *gadget;
 	unsigned long ts;
-	int ret;
 	unsigned long timeout = USB_CONNECT_TIMEOUT;
 
-	ret = usb_gadget_initialize(0);
-	if (ret)
-		return ret;
-
-	/* Configure default mac-addresses for the USB ethernet device */
-#ifdef CONFIG_USBNET_DEV_ADDR
-	strlcpy(dev_addr, CONFIG_USBNET_DEV_ADDR, sizeof(dev_addr));
-#endif
-#ifdef CONFIG_USBNET_HOST_ADDR
-	strlcpy(host_addr, CONFIG_USBNET_HOST_ADDR, sizeof(host_addr));
-#endif
-	/* Check if the user overruled the MAC addresses */
-	if (env_get("usbnet_devaddr"))
-		strlcpy(dev_addr, env_get("usbnet_devaddr"),
-			sizeof(dev_addr));
-
-	if (env_get("usbnet_hostaddr"))
-		strlcpy(host_addr, env_get("usbnet_hostaddr"),
-			sizeof(host_addr));
-
-	if (!is_eth_addr_valid(dev_addr)) {
-		pr_err("Need valid 'usbnet_devaddr' to be set");
-		goto fail;
-	}
-	if (!is_eth_addr_valid(host_addr)) {
-		pr_err("Need valid 'usbnet_hostaddr' to be set");
-		goto fail;
-	}
-
-	priv->eth_driver.speed		= DEVSPEED;
-	priv->eth_driver.bind		= eth_bind;
-	priv->eth_driver.unbind		= eth_unbind;
-	priv->eth_driver.setup		= eth_setup;
-	priv->eth_driver.reset		= eth_disconnect;
-	priv->eth_driver.disconnect	= eth_disconnect;
-	priv->eth_driver.suspend	= eth_suspend;
-	priv->eth_driver.resume		= eth_resume;
-	if (usb_gadget_register_driver(&priv->eth_driver) < 0)
-		goto fail;
-
 	dev->network_started = 0;
 
 	packet_received = 0;
@@ -2450,9 +2409,6 @@ static void usb_eth_stop(struct udevice *udev)
 		usb_gadget_handle_interrupts(0);
 		dev->network_started = 0;
 	}
-
-	usb_gadget_unregister_driver(&priv->eth_driver);
-	usb_gadget_release(0);
 }
 
 static int usb_eth_recv(struct udevice *dev, int flags, uchar **packetp)
@@ -2518,6 +2474,7 @@ static int usb_eth_probe(struct udevice *dev)
 {
 	struct ether_priv *priv = dev_get_priv(dev);
 	struct eth_pdata *pdata = dev_get_plat(dev);
+	int ret;
 
 	priv->netdev = dev;
 	l_priv = priv;
@@ -2525,6 +2482,55 @@ static int usb_eth_probe(struct udevice *dev)
 	get_ether_addr(CONFIG_USBNET_DEV_ADDR, pdata->enetaddr);
 	eth_env_set_enetaddr("usbnet_devaddr", pdata->enetaddr);
 
+	/* Configure default mac-addresses for the USB ethernet device */
+#ifdef CONFIG_USBNET_DEV_ADDR
+	strlcpy(dev_addr, CONFIG_USBNET_DEV_ADDR, sizeof(dev_addr));
+#endif
+#ifdef CONFIG_USBNET_HOST_ADDR
+	strlcpy(host_addr, CONFIG_USBNET_HOST_ADDR, sizeof(host_addr));
+#endif
+	/* Check if the user overruled the MAC addresses */
+	if (env_get("usbnet_devaddr"))
+		strlcpy(dev_addr, env_get("usbnet_devaddr"),
+			sizeof(dev_addr));
+
+	if (env_get("usbnet_hostaddr"))
+		strlcpy(host_addr, env_get("usbnet_hostaddr"),
+			sizeof(host_addr));
+
+	if (!is_eth_addr_valid(dev_addr)) {
+		pr_err("Need valid 'usbnet_devaddr' to be set");
+		goto fail;
+	}
+	if (!is_eth_addr_valid(host_addr)) {
+		pr_err("Need valid 'usbnet_hostaddr' to be set");
+		goto fail;
+	}
+
+	priv->eth_driver.speed		= DEVSPEED;
+	priv->eth_driver.bind		= eth_bind;
+	priv->eth_driver.unbind		= eth_unbind;
+	priv->eth_driver.setup		= eth_setup;
+	priv->eth_driver.reset		= eth_disconnect;
+	priv->eth_driver.disconnect	= eth_disconnect;
+	priv->eth_driver.suspend	= eth_suspend;
+	priv->eth_driver.resume		= eth_resume;
+	ret = usb_gadget_register_driver(&priv->eth_driver);
+	if (ret < 0)
+		goto fail;
+
+	return 0;
+fail:
+	usb_gadget_release(0);
+	return ret;
+}
+
+static int usb_eth_remove(struct udevice *dev)
+{
+	struct ether_priv *priv = dev_get_priv(dev);
+
+	usb_gadget_unregister_driver(&priv->eth_driver);
+
 	return 0;
 }
 
@@ -2532,6 +2538,7 @@ U_BOOT_DRIVER(eth_usb) = {
 	.name	= "usb_ether",
 	.id	= UCLASS_ETH,
 	.probe	= usb_eth_probe,
+	.remove	= usb_eth_remove,
 	.ops	= &usb_eth_ops,
 	.priv_auto	= sizeof(struct ether_priv),
 	.plat_auto	= sizeof(struct eth_pdata),
-- 
2.39.2



More information about the U-Boot mailing list