[PATCH v4 09/11] doc: board: starfive: Reword the make defconfig information
Yanhong Wang
yanhong.wang at starfivetech.com
Thu May 25 11:36:35 CEST 2023
The defconfig file name for StarFive VisionFive2 has been changed, and
the documentation description has also changed.
Signed-off-by: Yanhong Wang <yanhong.wang at starfivetech.com>
---
doc/board/starfive/visionfive2.rst | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/doc/board/starfive/visionfive2.rst b/doc/board/starfive/visionfive2.rst
index 4d43ac9729..951e0d80fb 100644
--- a/doc/board/starfive/visionfive2.rst
+++ b/doc/board/starfive/visionfive2.rst
@@ -62,7 +62,7 @@ Now build the U-Boot SPL and U-Boot proper
.. code-block:: console
cd <U-Boot-dir>
- make starfive_visionfive2_13b_defconfig
+ make starfive_visionfive2_defconfig
make OPENSBI=$(opensbi_dir)/opensbi/build/platform/generic/firmware/fw_dynamic.bin
This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb)
@@ -118,7 +118,7 @@ Program the SD card
sudo cp u-boot.itb /mnt/
sudo cp Image.gz /mnt/
sudo cp initramfs.cpio.gz /mnt/
- sudo cp jh7110-starfive-visionfive-2-v1.3b.dtb /mnt/
+ sudo cp jh7110-starfive-visionfive-2.dtb /mnt/
sudo umount /mnt
Booting
@@ -264,7 +264,7 @@ Sample boot log from StarFive VisionFive2 board
StarFive #fatload mmc 1:3 ${kernel_addr_r} Image.gz
6429424 bytes read in 394 ms (15.6 MiB/s)
- StarFive #fatload mmc 1:3 ${fdt_addr_r} jh7110-starfive-visionfive-2-v1.3b.dtb
+ StarFive #fatload mmc 1:3 ${fdt_addr_r} jh7110-starfive-visionfive-2.dtb
11285 bytes read in 5 ms (2.2 MiB/s)
StarFive #fatload mmc 1:3 ${ramdisk_addr_r} initramfs.cpio.gz
152848495 bytes read in 9271 ms (15.7 MiB/s)
--
2.17.1
More information about the U-Boot
mailing list