[PATCH v4 10/11] configs: starfive: Enable ethernet configuration for StarFive VisionFive2

[Yanhong Wang]

Enable DWC_ETH_QOS and PHY_MOTORCOMM configuration to support ethernet
function for StarFive VisionFive 2 board,including versions 1.2A and
1.3B.

Signed-off-by: Yanhong Wang <yanhong.wang at starfivetech.com>
---
 configs/starfive_visionfive2_defconfig | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/configs/starfive_visionfive2_defconfig b/configs/starfive_visionfive2_defconfig
index ffbc4b9476..c57708199d 100644
--- a/configs/starfive_visionfive2_defconfig
+++ b/configs/starfive_visionfive2_defconfig
@@ -7,7 +7,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000000
 CONFIG_SF_DEFAULT_SPEED=100000000
 CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="jh7110-starfive-visionfive-2-v1.3b"
+CONFIG_DEFAULT_DEVICE_TREE="jh7110-starfive-visionfive-2"
 CONFIG_SPL_TEXT_BASE=0x8000000
 CONFIG_SYS_PROMPT="StarFive #"
 CONFIG_OF_LIBFDT_OVERLAY=y
@@ -31,7 +31,7 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 debug rootwait earlycon=sbi"
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr};fdt addr ${fdtcontroladdr};"
-CONFIG_DEFAULT_FDT_FILE="starfive/jh7110-starfive-visionfive-2-v1.3b.dtb"
+CONFIG_DEFAULT_FDT_FILE="starfive/jh7110-starfive-visionfive-2.dtb"
 CONFIG_DISPLAY_CPUINFO=y
 CONFIG_DISPLAY_BOARDINFO=y
 CONFIG_SPL_MAX_SIZE=0x40000
@@ -54,6 +54,8 @@ CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
 CONFIG_SPL_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_SPL_CLK_JH7110=y
@@ -66,6 +68,13 @@ CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_ISSI=y
 CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_PHY_MOTORCOMM=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_STARFIVE=y
+CONFIG_RGMII=y
+CONFIG_RMII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCONF=y
 CONFIG_SPL_PINCTRL=y
-- 
2.17.1