[PATCH 09/10] ARM: dts: renesas: Add R8A77980 V3HSK DTs

Marek Vasut marek.vasut+renesas at mailbox.org
Wed May 31 23:13:15 CEST 2023


From: Valentine Barshak <valentine.barshak at cogentembedded.com>

Import R8A77980 V3HSK DTs from Linux 6.1.31,
commit d2869ace6eeb ("Linux 6.1.31").
Extracted from a larger patch by Valentine Barshak.

Reviewed-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
Signed-off-by: Valentine Barshak <valentine.barshak at cogentembedded.com>
Signed-off-by: Hai Pham <hai.pham.ud at renesas.com>
Signed-off-by: Tam Nguyen <tam.nguyen.xa at renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org> # Sync with 6.1.31
---
 arch/arm/dts/r8a77980-v3hsk.dts | 292 ++++++++++++++++++++++++++++++++
 1 file changed, 292 insertions(+)
 create mode 100644 arch/arm/dts/r8a77980-v3hsk.dts

diff --git a/arch/arm/dts/r8a77980-v3hsk.dts b/arch/arm/dts/r8a77980-v3hsk.dts
new file mode 100644
index 00000000000..d168b0e7747
--- /dev/null
+++ b/arch/arm/dts/r8a77980-v3hsk.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the V3H Starter Kit board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77980.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Renesas V3H Starter Kit board";
+	compatible = "renesas,v3hsk", "renesas,r8a77980";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		serial0 = &scif0;
+		ethernet0 = &gether;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&vcc3v3_d5>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port at 2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory at 48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0 0x48000000 0 0x78000000>;
+	};
+
+	osc1_clk: osc1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	vcc1v8_d4: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8_D4";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc3v3_d5: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3_D5";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&osc1_clk>;
+	clock-names = "du.0", "dclkin.0";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gether {
+	pinctrl-0 = <&gether_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy0: ethernet-phy at 0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi at 39 {
+		compatible = "adi,adv7511w";
+		#sound-dai-cells = <0>;
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&vcc1v8_d4>;
+		dvdd-supply = <&vcc1v8_d4>;
+		pvdd-supply = <&vcc1v8_d4>;
+		bgvdd-supply = <&vcc1v8_d4>;
+		dvdd-3v-supply = <&vcc3v3_d5>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port at 1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port at 1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&pfc {
+	gether_pins: gether {
+		groups = "gether_mdio_a", "gether_rgmii",
+			 "gether_txcrefclk", "gether_txcrefclk_mega";
+		function = "gether";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_b";
+		function = "scif_clk";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash at 0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam at 0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7 at 40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3 at c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2 at 140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6 at 180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31 at 1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot at 640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env at 700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb at 740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel at 7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user at 1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
-- 
2.39.2



More information about the U-Boot mailing list