[PATCH v3 5/7] clk/qcom: use function pointers for enable and set_rate
Caleb Connolly
caleb.connolly at linaro.org
Fri Nov 3 16:39:29 CET 2023
Currently, it isn't possible to build clock drivers for more than one
platform due to how the msm_enable() and msm_set_rate() callbacks are
implemented.
Extend qcom_clk_data to include function pointers for these and convert
all platforms to use them.
Previously, clock drivers relied on include/configs/<board.h> to include the
board specific sysmap header, however as most of the header contents are clock
driver related, import the contents directly into each clock driver and
remove the header. The only exception here is the dragonboard820c board file
which includes some pinctrl macros, those are also inlined.
Reviewed-by: Sumit Garg <sumit.garg at linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
.../mach-snapdragon/include/mach/sysmap-apq8016.h | 39 ----------
.../mach-snapdragon/include/mach/sysmap-apq8096.h | 37 ---------
.../mach-snapdragon/include/mach/sysmap-qcs404.h | 88 ----------------------
.../mach-snapdragon/include/mach/sysmap-sdm845.h | 42 -----------
board/qualcomm/dragonboard820c/dragonboard820c.c | 6 +-
drivers/clk/qcom/clock-apq8016.c | 37 +++++++--
drivers/clk/qcom/clock-apq8096.c | 33 ++++++--
drivers/clk/qcom/clock-ipq4019.c | 10 ++-
drivers/clk/qcom/clock-qcom.c | 17 +++--
drivers/clk/qcom/clock-qcom.h | 5 ++
drivers/clk/qcom/clock-qcs404.c | 85 ++++++++++++++++++++-
drivers/clk/qcom/clock-sdm845.c | 19 ++++-
include/configs/dragonboard410c.h | 1 -
include/configs/dragonboard820c.h | 1 -
include/configs/dragonboard845c.h | 1 -
include/configs/qcs404-evb.h | 1 -
16 files changed, 182 insertions(+), 240 deletions(-)
diff --git a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
deleted file mode 100644
index d9a3b1af986d..000000000000
--- a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Qualcomm APQ8916 sysmap
- *
- * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski at gmail.com>
- */
-#ifndef _MACH_SYSMAP_APQ8016_H
-#define _MACH_SYSMAP_APQ8016_H
-
-#define GICD_BASE (0x0b000000)
-#define GICC_BASE (0x0b002000)
-
-/* Clocks: (from CLK_CTL_BASE) */
-#define GPLL0_STATUS (0x2101C)
-#define APCS_GPLL_ENA_VOTE (0x45000)
-#define APCS_CLOCK_BRANCH_ENA_VOTE (0x45004)
-
-#define SDCC_BCR(n) ((n * 0x1000) + 0x41000)
-#define SDCC_CMD_RCGR(n) ((n * 0x1000) + 0x41004)
-#define SDCC_CFG_RCGR(n) ((n * 0x1000) + 0x41008)
-#define SDCC_M(n) ((n * 0x1000) + 0x4100C)
-#define SDCC_N(n) ((n * 0x1000) + 0x41010)
-#define SDCC_D(n) ((n * 0x1000) + 0x41014)
-#define SDCC_APPS_CBCR(n) ((n * 0x1000) + 0x41018)
-#define SDCC_AHB_CBCR(n) ((n * 0x1000) + 0x4101C)
-
-/* BLSP1 AHB clock (root clock for BLSP) */
-#define BLSP1_AHB_CBCR 0x1008
-
-/* Uart clock control registers */
-#define BLSP1_UART2_BCR (0x3028)
-#define BLSP1_UART2_APPS_CBCR (0x302C)
-#define BLSP1_UART2_APPS_CMD_RCGR (0x3034)
-#define BLSP1_UART2_APPS_CFG_RCGR (0x3038)
-#define BLSP1_UART2_APPS_M (0x303C)
-#define BLSP1_UART2_APPS_N (0x3040)
-#define BLSP1_UART2_APPS_D (0x3044)
-
-#endif
diff --git a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8096.h b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8096.h
deleted file mode 100644
index 36a902bd9290..000000000000
--- a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8096.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Qualcomm APQ8096 sysmap
- *
- * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz at linaro.org>
- */
-#ifndef _MACH_SYSMAP_APQ8096_H
-#define _MACH_SYSMAP_APQ8096_H
-
-#define TLMM_BASE_ADDR (0x1010000)
-
-/* Strength (sdc1) */
-#define SDC1_HDRV_PULL_CTL_REG (TLMM_BASE_ADDR + 0x0012D000)
-
-/* Clocks: (from CLK_CTL_BASE) */
-#define GPLL0_STATUS (0x0000)
-#define APCS_GPLL_ENA_VOTE (0x52000)
-#define APCS_CLOCK_BRANCH_ENA_VOTE (0x52004)
-
-#define SDCC2_BCR (0x14000) /* block reset */
-#define SDCC2_APPS_CBCR (0x14004) /* branch control */
-#define SDCC2_AHB_CBCR (0x14008)
-#define SDCC2_CMD_RCGR (0x14010)
-#define SDCC2_CFG_RCGR (0x14014)
-#define SDCC2_M (0x14018)
-#define SDCC2_N (0x1401C)
-#define SDCC2_D (0x14020)
-
-#define BLSP2_AHB_CBCR (0x25004)
-#define BLSP2_UART2_APPS_CBCR (0x29004)
-#define BLSP2_UART2_APPS_CMD_RCGR (0x2900C)
-#define BLSP2_UART2_APPS_CFG_RCGR (0x29010)
-#define BLSP2_UART2_APPS_M (0x29014)
-#define BLSP2_UART2_APPS_N (0x29018)
-#define BLSP2_UART2_APPS_D (0x2901C)
-
-#endif
diff --git a/arch/arm/mach-snapdragon/include/mach/sysmap-qcs404.h b/arch/arm/mach-snapdragon/include/mach/sysmap-qcs404.h
deleted file mode 100644
index 5768fb13775c..000000000000
--- a/arch/arm/mach-snapdragon/include/mach/sysmap-qcs404.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Qualcomm QCS404 sysmap
- *
- * (C) Copyright 2022 Sumit Garg <sumit.garg at linaro.org>
- */
-#ifndef _MACH_SYSMAP_QCS404_H
-#define _MACH_SYSMAP_QCS404_H
-
-#define GICD_BASE (0x0b000000)
-#define GICC_BASE (0x0b002000)
-
-/* Clocks: (from CLK_CTL_BASE) */
-#define GPLL0_STATUS (0x21000)
-#define GPLL1_STATUS (0x20000)
-#define APCS_GPLL_ENA_VOTE (0x45000)
-#define APCS_CLOCK_BRANCH_ENA_VOTE (0x45004)
-
-/* BLSP1 AHB clock (root clock for BLSP) */
-#define BLSP1_AHB_CBCR 0x1008
-
-/* Uart clock control registers */
-#define BLSP1_UART2_BCR (0x3028)
-#define BLSP1_UART2_APPS_CBCR (0x302C)
-#define BLSP1_UART2_APPS_CMD_RCGR (0x3034)
-#define BLSP1_UART2_APPS_CFG_RCGR (0x3038)
-#define BLSP1_UART2_APPS_M (0x303C)
-#define BLSP1_UART2_APPS_N (0x3040)
-#define BLSP1_UART2_APPS_D (0x3044)
-
-/* I2C controller clock control registerss */
-#define BLSP1_QUP0_I2C_APPS_CBCR (0x6028)
-#define BLSP1_QUP0_I2C_APPS_CMD_RCGR (0x602C)
-#define BLSP1_QUP0_I2C_APPS_CFG_RCGR (0x6030)
-#define BLSP1_QUP1_I2C_APPS_CBCR (0x2008)
-#define BLSP1_QUP1_I2C_APPS_CMD_RCGR (0x200C)
-#define BLSP1_QUP1_I2C_APPS_CFG_RCGR (0x2010)
-#define BLSP1_QUP2_I2C_APPS_CBCR (0x3010)
-#define BLSP1_QUP2_I2C_APPS_CMD_RCGR (0x3000)
-#define BLSP1_QUP2_I2C_APPS_CFG_RCGR (0x3004)
-#define BLSP1_QUP3_I2C_APPS_CBCR (0x4020)
-#define BLSP1_QUP3_I2C_APPS_CMD_RCGR (0x4000)
-#define BLSP1_QUP3_I2C_APPS_CFG_RCGR (0x4004)
-#define BLSP1_QUP4_I2C_APPS_CBCR (0x5020)
-#define BLSP1_QUP4_I2C_APPS_CMD_RCGR (0x5000)
-#define BLSP1_QUP4_I2C_APPS_CFG_RCGR (0x5004)
-
-/* SD controller clock control registers */
-#define SDCC_BCR(n) (((n) * 0x1000) + 0x41000)
-#define SDCC_CMD_RCGR(n) (((n) * 0x1000) + 0x41004)
-#define SDCC_CFG_RCGR(n) (((n) * 0x1000) + 0x41008)
-#define SDCC_M(n) (((n) * 0x1000) + 0x4100C)
-#define SDCC_N(n) (((n) * 0x1000) + 0x41010)
-#define SDCC_D(n) (((n) * 0x1000) + 0x41014)
-#define SDCC_APPS_CBCR(n) (((n) * 0x1000) + 0x41018)
-#define SDCC_AHB_CBCR(n) (((n) * 0x1000) + 0x4101C)
-
-/* USB-3.0 controller clock control registers */
-#define SYS_NOC_USB3_CBCR (0x26014)
-#define USB30_BCR (0x39000)
-#define USB3PHY_BCR (0x39008)
-#define USB30_MASTER_CBCR (0x3900C)
-#define USB30_SLEEP_CBCR (0x39010)
-#define USB30_MOCK_UTMI_CBCR (0x39014)
-#define USB30_MOCK_UTMI_CMD_RCGR (0x3901C)
-#define USB30_MOCK_UTMI_CFG_RCGR (0x39020)
-#define USB30_MASTER_CMD_RCGR (0x39028)
-#define USB30_MASTER_CFG_RCGR (0x3902C)
-#define USB30_MASTER_M (0x39030)
-#define USB30_MASTER_N (0x39034)
-#define USB30_MASTER_D (0x39038)
-#define USB2A_PHY_SLEEP_CBCR (0x4102C)
-#define USB_HS_PHY_CFG_AHB_CBCR (0x41030)
-
-/* ETH controller clock control registers */
-#define ETH_PTP_CBCR (0x4e004)
-#define ETH_RGMII_CBCR (0x4e008)
-#define ETH_SLAVE_AHB_CBCR (0x4e00c)
-#define ETH_AXI_CBCR (0x4e010)
-#define EMAC_PTP_CMD_RCGR (0x4e014)
-#define EMAC_PTP_CFG_RCGR (0x4e018)
-#define EMAC_CMD_RCGR (0x4e01c)
-#define EMAC_CFG_RCGR (0x4e020)
-#define EMAC_M (0x4e024)
-#define EMAC_N (0x4e028)
-#define EMAC_D (0x4e02c)
-
-#endif
diff --git a/arch/arm/mach-snapdragon/include/mach/sysmap-sdm845.h b/arch/arm/mach-snapdragon/include/mach/sysmap-sdm845.h
deleted file mode 100644
index 7165985bcd1e..000000000000
--- a/arch/arm/mach-snapdragon/include/mach/sysmap-sdm845.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Qualcomm SDM845 sysmap
- *
- * (C) Copyright 2021 Dzmitry Sankouski <dsankouski at gmail.com>
- */
-#ifndef _MACH_SYSMAP_SDM845_H
-#define _MACH_SYSMAP_SDM845_H
-
-#define TLMM_BASE_ADDR (0x1010000)
-
-/* Strength (sdc1) */
-#define SDC1_HDRV_PULL_CTL_REG (TLMM_BASE_ADDR + 0x0012D000)
-
-/* Clocks: (from CLK_CTL_BASE) */
-#define GPLL0_STATUS (0x0000)
-#define APCS_GPLL_ENA_VOTE (0x52000)
-#define APCS_CLOCK_BRANCH_ENA_VOTE (0x52004)
-
-#define SDCC2_BCR (0x14000) /* block reset */
-#define SDCC2_APPS_CBCR (0x14004) /* branch control */
-#define SDCC2_AHB_CBCR (0x14008)
-#define SDCC2_CMD_RCGR (0x1400c)
-#define SDCC2_CFG_RCGR (0x14010)
-#define SDCC2_M (0x14014)
-#define SDCC2_N (0x14018)
-#define SDCC2_D (0x1401C)
-
-#define RCG2_CFG_REG 0x4
-#define M_REG 0x8
-#define N_REG 0xc
-#define D_REG 0x10
-
-#define SE9_AHB_CBCR (0x25004)
-#define SE9_UART_APPS_CBCR (0x29004)
-#define SE9_UART_APPS_CMD_RCGR (0x18148)
-#define SE9_UART_APPS_CFG_RCGR (0x1814C)
-#define SE9_UART_APPS_M (0x18150)
-#define SE9_UART_APPS_N (0x18154)
-#define SE9_UART_APPS_D (0x18158)
-
-#endif
diff --git a/board/qualcomm/dragonboard820c/dragonboard820c.c b/board/qualcomm/dragonboard820c/dragonboard820c.c
index f9cc762a25cd..6785bf58e949 100644
--- a/board/qualcomm/dragonboard820c/dragonboard820c.c
+++ b/board/qualcomm/dragonboard820c/dragonboard820c.c
@@ -7,7 +7,6 @@
#include <cpu_func.h>
#include <init.h>
-#include <asm/arch/sysmap-apq8096.h>
#include <env.h>
#include <asm/cache.h>
#include <asm/global_data.h>
@@ -20,6 +19,11 @@
#include <asm/psci.h>
#include <asm/gpio.h>
+#define TLMM_BASE_ADDR (0x1010000)
+
+/* Strength (sdc1) */
+#define SDC1_HDRV_PULL_CTL_REG (TLMM_BASE_ADDR + 0x0012D000)
+
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c
index 3bddbd275906..3f44252c453e 100644
--- a/drivers/clk/qcom/clock-apq8016.c
+++ b/drivers/clk/qcom/clock-apq8016.c
@@ -16,6 +16,32 @@
#include "clock-qcom.h"
+/* Clocks: (from CLK_CTL_BASE) */
+#define GPLL0_STATUS (0x2101C)
+#define APCS_GPLL_ENA_VOTE (0x45000)
+#define APCS_CLOCK_BRANCH_ENA_VOTE (0x45004)
+
+#define SDCC_BCR(n) ((n * 0x1000) + 0x41000)
+#define SDCC_CMD_RCGR(n) ((n * 0x1000) + 0x41004)
+#define SDCC_CFG_RCGR(n) ((n * 0x1000) + 0x41008)
+#define SDCC_M(n) ((n * 0x1000) + 0x4100C)
+#define SDCC_N(n) ((n * 0x1000) + 0x41010)
+#define SDCC_D(n) ((n * 0x1000) + 0x41014)
+#define SDCC_APPS_CBCR(n) ((n * 0x1000) + 0x41018)
+#define SDCC_AHB_CBCR(n) ((n * 0x1000) + 0x4101C)
+
+/* BLSP1 AHB clock (root clock for BLSP) */
+#define BLSP1_AHB_CBCR 0x1008
+
+/* Uart clock control registers */
+#define BLSP1_UART2_BCR (0x3028)
+#define BLSP1_UART2_APPS_CBCR (0x302C)
+#define BLSP1_UART2_APPS_CMD_RCGR (0x3034)
+#define BLSP1_UART2_APPS_CFG_RCGR (0x3038)
+#define BLSP1_UART2_APPS_M (0x303C)
+#define BLSP1_UART2_APPS_N (0x3040)
+#define BLSP1_UART2_APPS_D (0x3044)
+
/* GPLL0 clock control registers */
#define GPLL0_STATUS_ACTIVE BIT(17)
@@ -94,7 +120,7 @@ static int clk_init_uart(struct msm_clk_priv *priv)
return 0;
}
-ulong msm_set_rate(struct clk *clk, ulong rate)
+static ulong apq8016_clk_set_rate(struct clk *clk, ulong rate)
{
struct msm_clk_priv *priv = dev_get_priv(clk->dev);
@@ -113,15 +139,14 @@ ulong msm_set_rate(struct clk *clk, ulong rate)
}
}
-int msm_enable(struct clk *clk)
-{
- return 0;
-}
+static struct msm_clk_data apq8016_clk_data = {
+ .set_rate = apq8016_clk_set_rate,
+};
static const struct udevice_id gcc_apq8016_of_match[] = {
{
.compatible = "qcom,gcc-apq8016",
- /* TODO: add reset map */
+ .data = (ulong)&apq8016_clk_data,
},
{ }
};
diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c
index 64b8cdf4c54b..75633a7c2af8 100644
--- a/drivers/clk/qcom/clock-apq8096.c
+++ b/drivers/clk/qcom/clock-apq8096.c
@@ -16,6 +16,28 @@
#include "clock-qcom.h"
+/* Clocks: (from CLK_CTL_BASE) */
+#define GPLL0_STATUS (0x0000)
+#define APCS_GPLL_ENA_VOTE (0x52000)
+#define APCS_CLOCK_BRANCH_ENA_VOTE (0x52004)
+
+#define SDCC2_BCR (0x14000) /* block reset */
+#define SDCC2_APPS_CBCR (0x14004) /* branch control */
+#define SDCC2_AHB_CBCR (0x14008)
+#define SDCC2_CMD_RCGR (0x14010)
+#define SDCC2_CFG_RCGR (0x14014)
+#define SDCC2_M (0x14018)
+#define SDCC2_N (0x1401C)
+#define SDCC2_D (0x14020)
+
+#define BLSP2_AHB_CBCR (0x25004)
+#define BLSP2_UART2_APPS_CBCR (0x29004)
+#define BLSP2_UART2_APPS_CMD_RCGR (0x2900C)
+#define BLSP2_UART2_APPS_CFG_RCGR (0x29010)
+#define BLSP2_UART2_APPS_M (0x29014)
+#define BLSP2_UART2_APPS_N (0x29018)
+#define BLSP2_UART2_APPS_D (0x2901C)
+
/* GPLL0 clock control registers */
#define GPLL0_STATUS_ACTIVE BIT(30)
#define APCS_GPLL_ENA_VOTE_GPLL0 BIT(0)
@@ -80,7 +102,7 @@ static int clk_init_uart(struct msm_clk_priv *priv)
return 0;
}
-ulong msm_set_rate(struct clk *clk, ulong rate)
+static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate)
{
struct msm_clk_priv *priv = dev_get_priv(clk->dev);
@@ -95,15 +117,14 @@ ulong msm_set_rate(struct clk *clk, ulong rate)
}
}
-int msm_enable(struct clk *clk)
-{
- return 0;
-}
+static struct msm_clk_data apq8096_clk_data = {
+ .set_rate = apq8096_clk_set_rate,
+};
static const struct udevice_id gcc_apq8096_of_match[] = {
{
.compatible = "qcom,gcc-apq8096",
- /* TODO: add reset map */
+ .data = (ulong)&apq8096_clk_data,
},
{ }
};
diff --git a/drivers/clk/qcom/clock-ipq4019.c b/drivers/clk/qcom/clock-ipq4019.c
index db869f874219..d693776d339d 100644
--- a/drivers/clk/qcom/clock-ipq4019.c
+++ b/drivers/clk/qcom/clock-ipq4019.c
@@ -16,7 +16,7 @@
#include "clock-qcom.h"
-ulong msm_set_rate(struct clk *clk, ulong rate)
+static ulong ipq4019_clk_set_rate(struct clk *clk, ulong rate)
{
switch (clk->id) {
case GCC_BLSP1_UART1_APPS_CLK: /*UART1*/
@@ -27,7 +27,7 @@ ulong msm_set_rate(struct clk *clk, ulong rate)
}
}
-int msm_enable(struct clk *clk)
+static int ipq4019_clk_enable(struct clk *clk)
{
switch (clk->id) {
case GCC_BLSP1_QUP1_SPI_APPS_CLK: /*SPI1*/
@@ -123,7 +123,9 @@ static const struct qcom_reset_map gcc_ipq4019_resets[] = {
[GCC_SPDM_BCR] = {0x25000, 0},
};
-static struct msm_clk_data ipq4019_data = {
+static struct msm_clk_data ipq4019_clk_data = {
+ .enable = ipq4019_clk_enable,
+ .set_rate = ipq4019_clk_set_rate,
.resets = gcc_ipq4019_resets,
.num_resets = ARRAY_SIZE(gcc_ipq4019_resets),
};
@@ -131,7 +133,7 @@ static struct msm_clk_data ipq4019_data = {
static const struct udevice_id gcc_ipq4019_of_match[] = {
{
.compatible = "qcom,gcc-ipq4019",
- .data = (ulong)&ipq4019_data,
+ .data = (ulong)&ipq4019_clk_data,
},
{ }
};
diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c
index a661837e4e11..77bcaacd1583 100644
--- a/drivers/clk/qcom/clock-qcom.c
+++ b/drivers/clk/qcom/clock-qcom.c
@@ -28,9 +28,6 @@
#define CBCR_BRANCH_ENABLE_BIT BIT(0)
#define CBCR_BRANCH_OFF_BIT BIT(31)
-extern ulong msm_set_rate(struct clk *clk, ulong rate);
-extern int msm_enable(struct clk *clk);
-
/* Enable clock controlled by CBC soft macro */
void clk_enable_cbc(phys_addr_t cbcr)
{
@@ -160,12 +157,22 @@ static int msm_clk_probe(struct udevice *dev)
static ulong msm_clk_set_rate(struct clk *clk, ulong rate)
{
- return msm_set_rate(clk, rate);
+ struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(clk->dev);
+
+ if (data->set_rate)
+ return data->set_rate(clk, rate);
+
+ return 0;
}
static int msm_clk_enable(struct clk *clk)
{
- return msm_enable(clk);
+ struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(clk->dev);
+
+ if (data->enable)
+ return data->enable(clk);
+
+ return 0;
}
static struct clk_ops msm_clk_ops = {
diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h
index 6d399db987b6..86f9ff6eb2f6 100644
--- a/drivers/clk/qcom/clock-qcom.h
+++ b/drivers/clk/qcom/clock-qcom.h
@@ -49,11 +49,16 @@ struct qcom_reset_map {
u8 bit;
};
+struct clk;
+
struct msm_clk_data {
const struct qcom_reset_map *resets;
unsigned long num_resets;
const struct gate_clk *clks;
unsigned long num_clks;
+
+ int (*enable)(struct clk *clk);
+ unsigned long (*set_rate)(struct clk *clk, unsigned long rate);
};
struct msm_clk_priv {
diff --git a/drivers/clk/qcom/clock-qcs404.c b/drivers/clk/qcom/clock-qcs404.c
index 10ac3609be42..9ad580b50fc8 100644
--- a/drivers/clk/qcom/clock-qcs404.c
+++ b/drivers/clk/qcom/clock-qcs404.c
@@ -15,6 +15,81 @@
#include "clock-qcom.h"
+/* Clocks: (from CLK_CTL_BASE) */
+#define GPLL0_STATUS (0x21000)
+#define GPLL1_STATUS (0x20000)
+#define APCS_GPLL_ENA_VOTE (0x45000)
+#define APCS_CLOCK_BRANCH_ENA_VOTE (0x45004)
+
+/* BLSP1 AHB clock (root clock for BLSP) */
+#define BLSP1_AHB_CBCR 0x1008
+
+/* Uart clock control registers */
+#define BLSP1_UART2_BCR (0x3028)
+#define BLSP1_UART2_APPS_CBCR (0x302C)
+#define BLSP1_UART2_APPS_CMD_RCGR (0x3034)
+#define BLSP1_UART2_APPS_CFG_RCGR (0x3038)
+#define BLSP1_UART2_APPS_M (0x303C)
+#define BLSP1_UART2_APPS_N (0x3040)
+#define BLSP1_UART2_APPS_D (0x3044)
+
+/* I2C controller clock control registerss */
+#define BLSP1_QUP0_I2C_APPS_CBCR (0x6028)
+#define BLSP1_QUP0_I2C_APPS_CMD_RCGR (0x602C)
+#define BLSP1_QUP0_I2C_APPS_CFG_RCGR (0x6030)
+#define BLSP1_QUP1_I2C_APPS_CBCR (0x2008)
+#define BLSP1_QUP1_I2C_APPS_CMD_RCGR (0x200C)
+#define BLSP1_QUP1_I2C_APPS_CFG_RCGR (0x2010)
+#define BLSP1_QUP2_I2C_APPS_CBCR (0x3010)
+#define BLSP1_QUP2_I2C_APPS_CMD_RCGR (0x3000)
+#define BLSP1_QUP2_I2C_APPS_CFG_RCGR (0x3004)
+#define BLSP1_QUP3_I2C_APPS_CBCR (0x4020)
+#define BLSP1_QUP3_I2C_APPS_CMD_RCGR (0x4000)
+#define BLSP1_QUP3_I2C_APPS_CFG_RCGR (0x4004)
+#define BLSP1_QUP4_I2C_APPS_CBCR (0x5020)
+#define BLSP1_QUP4_I2C_APPS_CMD_RCGR (0x5000)
+#define BLSP1_QUP4_I2C_APPS_CFG_RCGR (0x5004)
+
+/* SD controller clock control registers */
+#define SDCC_BCR(n) (((n) * 0x1000) + 0x41000)
+#define SDCC_CMD_RCGR(n) (((n) * 0x1000) + 0x41004)
+#define SDCC_CFG_RCGR(n) (((n) * 0x1000) + 0x41008)
+#define SDCC_M(n) (((n) * 0x1000) + 0x4100C)
+#define SDCC_N(n) (((n) * 0x1000) + 0x41010)
+#define SDCC_D(n) (((n) * 0x1000) + 0x41014)
+#define SDCC_APPS_CBCR(n) (((n) * 0x1000) + 0x41018)
+#define SDCC_AHB_CBCR(n) (((n) * 0x1000) + 0x4101C)
+
+/* USB-3.0 controller clock control registers */
+#define SYS_NOC_USB3_CBCR (0x26014)
+#define USB30_BCR (0x39000)
+#define USB3PHY_BCR (0x39008)
+#define USB30_MASTER_CBCR (0x3900C)
+#define USB30_SLEEP_CBCR (0x39010)
+#define USB30_MOCK_UTMI_CBCR (0x39014)
+#define USB30_MOCK_UTMI_CMD_RCGR (0x3901C)
+#define USB30_MOCK_UTMI_CFG_RCGR (0x39020)
+#define USB30_MASTER_CMD_RCGR (0x39028)
+#define USB30_MASTER_CFG_RCGR (0x3902C)
+#define USB30_MASTER_M (0x39030)
+#define USB30_MASTER_N (0x39034)
+#define USB30_MASTER_D (0x39038)
+#define USB2A_PHY_SLEEP_CBCR (0x4102C)
+#define USB_HS_PHY_CFG_AHB_CBCR (0x41030)
+
+/* ETH controller clock control registers */
+#define ETH_PTP_CBCR (0x4e004)
+#define ETH_RGMII_CBCR (0x4e008)
+#define ETH_SLAVE_AHB_CBCR (0x4e00c)
+#define ETH_AXI_CBCR (0x4e010)
+#define EMAC_PTP_CMD_RCGR (0x4e014)
+#define EMAC_PTP_CFG_RCGR (0x4e018)
+#define EMAC_CMD_RCGR (0x4e01c)
+#define EMAC_CFG_RCGR (0x4e020)
+#define EMAC_M (0x4e024)
+#define EMAC_N (0x4e028)
+#define EMAC_D (0x4e02c)
+
/* GPLL0 clock control registers */
#define GPLL0_STATUS_ACTIVE BIT(31)
@@ -112,7 +187,7 @@ static const struct bcr_regs blsp1_qup4_i2c_apps_regs = {
/* mnd_width = 0 */
};
-ulong msm_set_rate(struct clk *clk, ulong rate)
+static ulong qcs404_clk_set_rate(struct clk *clk, ulong rate)
{
struct msm_clk_priv *priv = dev_get_priv(clk->dev);
@@ -157,7 +232,7 @@ ulong msm_set_rate(struct clk *clk, ulong rate)
return 0;
}
-int msm_enable(struct clk *clk)
+static int qcs404_clk_enable(struct clk *clk)
{
struct msm_clk_priv *priv = dev_get_priv(clk->dev);
@@ -263,15 +338,17 @@ static const struct qcom_reset_map qcs404_gcc_resets[] = {
[GCC_WDSP_RESTART] = {0x19000},
};
-static const struct msm_clk_data qcs404_gcc_data = {
+static const struct msm_clk_data qcs404_clk_gcc_data = {
.resets = qcs404_gcc_resets,
.num_resets = ARRAY_SIZE(qcs404_gcc_resets),
+ .enable = qcs404_clk_enable,
+ .set_rate = qcs404_clk_set_rate,
};
static const struct udevice_id gcc_qcs404_of_match[] = {
{
.compatible = "qcom,gcc-qcs404",
- .data = (ulong)&qcs404_gcc_data
+ .data = (ulong)&qcs404_clk_gcc_data
},
{ }
};
diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c
index 57124e2a661a..fc9a783f7354 100644
--- a/drivers/clk/qcom/clock-sdm845.c
+++ b/drivers/clk/qcom/clock-sdm845.c
@@ -19,6 +19,14 @@
#include "clock-qcom.h"
+#define SE9_AHB_CBCR 0x25004
+#define SE9_UART_APPS_CBCR 0x29004
+#define SE9_UART_APPS_CMD_RCGR 0x18148
+#define SE9_UART_APPS_CFG_RCGR 0x1814C
+#define SE9_UART_APPS_M 0x18150
+#define SE9_UART_APPS_N 0x18154
+#define SE9_UART_APPS_D 0x18158
+
#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
struct freq_tbl {
@@ -72,7 +80,7 @@ const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate)
return f - 1;
}
-ulong msm_set_rate(struct clk *clk, ulong rate)
+static ulong sdm845_clk_set_rate(struct clk *clk, ulong rate)
{
struct msm_clk_priv *priv = dev_get_priv(clk->dev);
const struct freq_tbl *freq;
@@ -148,7 +156,7 @@ static const struct gate_clk sdm845_clks[] = {
GATE_CLK(GCC_USB_PHY_CFG_AHB2PHY_CLK, 0x6a004, 0x00000001),
};
-int msm_enable(struct clk *clk)
+static int sdm845_clk_enable(struct clk *clk)
{
struct msm_clk_priv *priv = dev_get_priv(clk->dev);
@@ -179,17 +187,20 @@ static const struct qcom_reset_map sdm845_gcc_resets[] = {
[GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 },
};
-static const struct msm_clk_data qcs404_gcc_data = {
+static struct msm_clk_data sdm845_clk_data = {
.resets = sdm845_gcc_resets,
.num_resets = ARRAY_SIZE(sdm845_gcc_resets),
.clks = sdm845_clks,
.num_clks = ARRAY_SIZE(sdm845_clks),
+
+ .enable = sdm845_clk_enable,
+ .set_rate = sdm845_clk_set_rate,
};
static const struct udevice_id gcc_sdm845_of_match[] = {
{
.compatible = "qcom,gcc-sdm845",
- .data = (ulong)&qcs404_gcc_data,
+ .data = (ulong)&sdm845_clk_data,
},
{ }
};
diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h
index 73aec348458a..00102cd5c4f5 100644
--- a/include/configs/dragonboard410c.h
+++ b/include/configs/dragonboard410c.h
@@ -9,7 +9,6 @@
#define __CONFIGS_DRAGONBOARD410C_H
#include <linux/sizes.h>
-#include <asm/arch/sysmap-apq8016.h>
/* Build new ELF image from u-boot.bin (U-Boot + appended DTB) */
diff --git a/include/configs/dragonboard820c.h b/include/configs/dragonboard820c.h
index 499708371113..c6d9182ccc9d 100644
--- a/include/configs/dragonboard820c.h
+++ b/include/configs/dragonboard820c.h
@@ -9,7 +9,6 @@
#define __CONFIGS_DRAGONBOARD820C_H
#include <linux/sizes.h>
-#include <asm/arch/sysmap-apq8096.h>
/* Physical Memory Map */
diff --git a/include/configs/dragonboard845c.h b/include/configs/dragonboard845c.h
index c1e590fae2a5..14a8a2ca049e 100644
--- a/include/configs/dragonboard845c.h
+++ b/include/configs/dragonboard845c.h
@@ -9,7 +9,6 @@
#define __CONFIGS_SDM845_H
#include <linux/sizes.h>
-#include <asm/arch/sysmap-sdm845.h>
#define CFG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 }
diff --git a/include/configs/qcs404-evb.h b/include/configs/qcs404-evb.h
index 8ea59aa21ca6..9501d43665e9 100644
--- a/include/configs/qcs404-evb.h
+++ b/include/configs/qcs404-evb.h
@@ -9,7 +9,6 @@
#define __CONFIGS_QCS404EVB_H
#include <linux/sizes.h>
-#include <asm/arch/sysmap-qcs404.h>
#define CFG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 }
--
2.42.0
More information about the U-Boot
mailing list