[PATCH v4 1/2] arm: mach-k3: j7200: Add mcu_timer0 id to the dev list

[Reid Tonking]

mcu_timer0 is now used as the tick timer in u-boot, so this adds the
timer to the soc device list so it can be enabled via the k3 power
controller.

Reviewed-by: Nishanth Menon <nm at ti.com>
Signed-off-by: Reid Tonking <reidt at ti.com>
---
 arch/arm/mach-k3/j7200/dev-data.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-k3/j7200/dev-data.c b/arch/arm/mach-k3/j7200/dev-data.c
index 4ddc34210e..8ce6796fd0 100644
--- a/arch/arm/mach-k3/j7200/dev-data.c
+++ b/arch/arm/mach-k3/j7200/dev-data.c
@@ -46,6 +46,7 @@ static struct ti_lpsc soc_lpsc_list[] = {
 
 static struct ti_dev soc_dev_list[] = {
 	PSC_DEV(30, &soc_lpsc_list[0]),
+	PSC_DEV(35, &soc_lpsc_list[0]),
 	PSC_DEV(61, &soc_lpsc_list[1]),
 	PSC_DEV(90, &soc_lpsc_list[2]),
 	PSC_DEV(8, &soc_lpsc_list[3]),
-- 
2.34.1