[PATCH v4 2/2] arm: dts: j7200: dts sync with Linux 6.6-rc1
Reid Tonking
reidt at ti.com
Wed Oct 4 18:56:29 CEST 2023
Sync j7200 dts with Linux 6.6-rc1
- k3-j7200-r5-common-proc-board.dts now inherits from
k3-j7200-common-proc-board.dts instead of k3-j7200-som-p0.dtsi. This
allows us to trim down the r5 file considerably by using existing
properties
- remove pimux nodes from r5 file
- remove duplicate nodes & node properties from r5/u-boot files
- mcu_timer0 now used instead of timer1
mcu_timer0 device id added to dev-data.c file in order to work
- remove cpsw node
This node is no longer required since the compatible is now fixed
- remove dummy_clock_19_2_mhz
This node wasn't being used anyhere, so it was removed
- remove dummy_clock_200mhz
main_sdhci0 & main_sdhci1 no longer need dummy clock for eMMC/SD
- fix secure proxy node
mcu_secproxy changed to used secure_prxy_mcu which is already
defined in k3-j7200-mcu-wakeup.dtsi
- removed &mcu_ringacc property override since they're present in
v6.6-rc1
Signed-off-by: Reid Tonking <reidt at ti.com>
---
.../k3-j7200-common-proc-board-u-boot.dtsi | 208 +++----
arch/arm/dts/k3-j7200-common-proc-board.dts | 186 +++---
arch/arm/dts/k3-j7200-main.dtsi | 535 +++++++++++++++++-
arch/arm/dts/k3-j7200-mcu-wakeup.dtsi | 286 +++++++++-
.../arm/dts/k3-j7200-r5-common-proc-board.dts | 311 +---------
arch/arm/dts/k3-j7200-som-p0.dtsi | 154 +++--
arch/arm/dts/k3-j7200-thermal.dtsi | 47 ++
arch/arm/dts/k3-j7200.dtsi | 30 +-
8 files changed, 1211 insertions(+), 546 deletions(-)
create mode 100644 arch/arm/dts/k3-j7200-thermal.dtsi
diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
index f25c7136c9..60ca6d21ab 100644
--- a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
@@ -1,200 +1,210 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2023 Texas Instruments Incorporated - https://www.ti.com/
*/
#include "k3-j7200-binman.dtsi"
/ {
chosen {
- stdout-path = "serial2:115200n8";
- tick-timer = &timer1;
- };
-
- aliases {
- ethernet0 = &cpsw_port1;
- i2c0 = &wkup_i2c0;
- i2c1 = &mcu_i2c0;
- i2c2 = &mcu_i2c1;
- i2c3 = &main_i2c0;
+ tick-timer = &mcu_timer0;
};
};
&cbass_main {
- bootph-pre-ram;
+ bootph-all;
};
&main_navss {
- bootph-pre-ram;
+ bootph-all;
+};
+
+&main_esm {
+ bootph-all;
};
&cbass_mcu_wakeup {
- bootph-pre-ram;
-
- timer1: timer at 40400000 {
- compatible = "ti,omap5430-timer";
- reg = <0x0 0x40400000 0x0 0x80>;
- ti,timer-alwon;
- clock-frequency = <250000000>;
- bootph-pre-ram;
- };
+ bootph-all;
chipid at 43000014 {
- bootph-pre-ram;
+ bootph-all;
};
+};
- mcu_navss: bus at 28380000 {
- bootph-pre-ram;
- #address-cells = <2>;
- #size-cells = <2>;
-
- ringacc at 2b800000 {
- reg = <0x0 0x2b800000 0x0 0x400000>,
- <0x0 0x2b000000 0x0 0x400000>,
- <0x0 0x28590000 0x0 0x100>,
- <0x0 0x2a500000 0x0 0x40000>,
- <0x0 0x28440000 0x0 0x40000>;
- reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
- bootph-pre-ram;
- };
-
- dma-controller at 285c0000 {
- reg = <0x0 0x285c0000 0x0 0x100>,
- <0x0 0x284c0000 0x0 0x4000>,
- <0x0 0x2a800000 0x0 0x40000>,
- <0x0 0x284a0000 0x0 0x4000>,
- <0x0 0x2aa00000 0x0 0x40000>,
- <0x0 0x28400000 0x0 0x2000>;
- reg-names = "gcfg", "rchan", "rchanrt", "tchan",
- "tchanrt", "rflow";
- bootph-pre-ram;
- };
- };
+&mcu_navss {
+ bootph-all;
+};
+
+&mcu_ringacc {
+ bootph-all;
+};
+
+&mcu_udmap {
+ reg = <0x0 0x285c0000 0x0 0x100>,
+ <0x0 0x284c0000 0x0 0x4000>,
+ <0x0 0x2a800000 0x0 0x40000>,
+ <0x0 0x284a0000 0x0 0x4000>,
+ <0x0 0x2aa00000 0x0 0x40000>,
+ <0x0 0x28400000 0x0 0x2000>;
+ reg-names = "gcfg", "rchan", "rchanrt", "tchan",
+ "tchanrt", "rflow";
+ bootph-all;
};
&secure_proxy_main {
- bootph-pre-ram;
+ bootph-all;
};
&dmsc {
- bootph-pre-ram;
+ bootph-all;
k3_sysreset: sysreset-controller {
compatible = "ti,sci-sysreset";
- bootph-pre-ram;
+ bootph-all;
};
};
&k3_pds {
- bootph-pre-ram;
+ bootph-all;
};
&k3_clks {
- bootph-pre-ram;
+ bootph-all;
};
&k3_reset {
- bootph-pre-ram;
+ bootph-all;
};
&wkup_pmx0 {
- bootph-pre-ram;
+ bootph-all;
+};
+
+&wkup_pmx2 {
+ bootph-all;
};
&main_pmx0 {
- bootph-pre-ram;
+ bootph-all;
};
&main_uart0 {
- bootph-pre-ram;
+ bootph-all;
+};
+
+&main_uart2 {
+ bootph-all;
};
&mcu_uart0 {
- bootph-pre-ram;
+ bootph-all;
};
&main_sdhci0 {
- bootph-pre-ram;
+ bootph-all;
};
&main_sdhci1 {
- bootph-pre-ram;
+ bootph-all;
};
&wkup_i2c0 {
- bootph-pre-ram;
+ bootph-all;
};
&main_i2c0 {
- bootph-pre-ram;
+ bootph-all;
};
-&main_i2c0_pins_default {
- bootph-pre-ram;
+&exp1 {
+ bootph-all;
};
&exp2 {
- bootph-pre-ram;
+ bootph-all;
};
&mcu_cpsw {
- reg = <0x0 0x46000000 0x0 0x200000>,
- <0x0 0x40f00200 0x0 0x8>;
- reg-names = "cpsw_nuss", "mac_efuse";
- /delete-property/ ranges;
-
- cpsw-phy-sel at 40f04040 {
- compatible = "ti,am654-cpsw-phy-sel";
- reg= <0x0 0x40f04040 0x0 0x4>;
- reg-names = "gmii-sel";
- };
+ bootph-all;
};
-&main_usbss0_pins_default {
- bootph-pre-ram;
+&mcu_uart0 {
+ bootph-all;
};
-&usbss0 {
- bootph-pre-ram;
- ti,usb2-only;
+&wkup_i2c0 {
+ bootph-all;
};
-&usb0 {
- dr_mode = "peripheral";
- bootph-pre-ram;
+&wkup_uart0 {
+ bootph-all;
};
-&mcu_fss0_hpb0_pins_default {
- bootph-pre-ram;
+&fss {
+ bootph-all;
};
-&fss {
- bootph-pre-ram;
+&main_uart0_pins_default {
+ bootph-all;
+};
+
+&main_mmc1_pins_default {
+ bootph-all;
+};
+
+&main_i2c0_pins_default {
+ bootph-all;
+};
+
+&wkup_i2c0_pins_default {
+ bootph-all;
+};
+
+&wkup_uart0_pins_default {
+ bootph-all;
+};
+
+&wkup_gpio_pins_default {
+ bootph-all;
+};
+
+&wkup_gpio0 {
+ bootph-all;
};
&hbmc {
- bootph-pre-ram;
+ bootph-all;
flash at 0,0 {
- bootph-pre-ram;
+ bootph-all;
};
};
&hbmc_mux {
- bootph-pre-ram;
+ bootph-all;
+};
+
+&usbss0 {
+ bootph-all;
+ ti,usb2-only;
+};
+
+&usb0 {
+ dr_mode = "peripheral";
+ bootph-all;
+};
+
+&ospi0 {
+ bootph-all;
};
&serdes_ln_ctrl {
- u-boot,mux-autoprobe;
+ bootph-all;
};
&usb_serdes_mux {
- u-boot,mux-autoprobe;
+ bootph-all;
};
&serdes0 {
- bootph-pre-ram;
-};
-
-&main_r5fss0 {
- ti,cluster-mode = <0>;
+ bootph-all;
};
diff --git a/arch/arm/dts/k3-j7200-common-proc-board.dts b/arch/arm/dts/k3-j7200-common-proc-board.dts
index ef5e807a80..cee2b4b0eb 100644
--- a/arch/arm/dts/k3-j7200-common-proc-board.dts
+++ b/arch/arm/dts/k3-j7200-common-proc-board.dts
@@ -9,12 +9,25 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/net/ti-dp83867.h>
#include <dt-bindings/phy/phy.h>
+
#include "k3-serdes.h"
/ {
+ compatible = "ti,j7200-evm", "ti,j7200";
+ model = "Texas Instruments J7200 EVM";
+
+ aliases {
+ serial0 = &wkup_uart0;
+ serial1 = &mcu_uart0;
+ serial2 = &main_uart0;
+ serial3 = &main_uart1;
+ serial5 = &main_uart3;
+ mmc0 = &main_sdhci0;
+ mmc1 = &main_sdhci1;
+ };
+
chosen {
stdout-path = "serial2:115200n8";
- bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
};
evm_12v0: fixedregulator-evm12v0 {
@@ -78,47 +91,87 @@
};
&wkup_pmx0 {
- mcu_cpsw_pins_default: mcu-cpsw-pins-default {
+ mcu_uart0_pins_default: mcu-uart0-default-pins {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
+ J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
+ J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */
+ J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
+ >;
+ };
+
+ wkup_uart0_pins_default: wkup-uart0-default-pins {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
+ J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
+ >;
+ };
+};
+
+&wkup_pmx2 {
+ mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
+ J721E_WKUP_IOPAD(0x0004, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
+ J721E_WKUP_IOPAD(0x0008, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
+ J721E_WKUP_IOPAD(0x000c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
+ J721E_WKUP_IOPAD(0x0010, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
+ J721E_WKUP_IOPAD(0x0014, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
+ J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
+ J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
+ J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
+ J721E_WKUP_IOPAD(0x002c, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
+ J721E_WKUP_IOPAD(0x0018, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
+ J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
+ >;
+ };
+
+ wkup_gpio_pins_default: wkup-gpio-default-pins {
pinctrl-single,pins = <
- J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
- J721E_WKUP_IOPAD(0x006c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
- J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
- J721E_WKUP_IOPAD(0x0074, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
- J721E_WKUP_IOPAD(0x0078, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
- J721E_WKUP_IOPAD(0x007c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
- J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
- J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
- J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
- J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
- J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
- J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
+ J721E_WKUP_IOPAD(0x70, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_6 */
>;
};
- mcu_mdio_pins_default: mcu-mdio1-pins-default {
+ mcu_mdio_pins_default: mcu-mdio1-default-pins {
pinctrl-single,pins = <
- J721E_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
- J721E_WKUP_IOPAD(0x0098, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
+ J721E_WKUP_IOPAD(0x0034, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
+ J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
>;
};
};
&main_pmx0 {
- main_i2c0_pins_default: main-i2c0-pins-default {
+ main_uart0_pins_default: main-uart0-default-pins {
pinctrl-single,pins = <
- J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
- J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
+ J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */
+ J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */
+ J721E_IOPAD(0xc0, PIN_INPUT, 2) /* (W3) SPI0_CS0.UART0_CTSn */
+ J721E_IOPAD(0xc4, PIN_OUTPUT, 2) /* (U5) SPI0_CS1.UART0_RTSn */
>;
};
- main_i2c1_pins_default: main-i2c1-pins-default {
+ main_uart1_pins_default: main-uart1-default-pins {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0xb8, PIN_INPUT, 0) /* (T18) UART1_RXD */
+ J721E_IOPAD(0xbc, PIN_INPUT, 0) /* (T20) UART1_TXD */
+ >;
+ };
+
+ main_uart3_pins_default: main-uart3-default-pins {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x60, PIN_INPUT, 11) /* (T15) MCAN8_TX.UART3_CTSn */
+ J721E_IOPAD(0x30, PIN_INPUT, 11) /* (Y18) MCAN2_TX.UART3_RXD */
+ >;
+ };
+
+ main_i2c1_pins_default: main-i2c1-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */
J721E_IOPAD(0xe0, PIN_INPUT_PULLUP, 3) /* (T3) EXT_REFCLK1.I2C1_SDA */
>;
};
- main_mmc1_pins_default: main-mmc1-pins-default {
+ main_mmc1_pins_default: main-mmc1-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */
J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */
@@ -131,15 +184,17 @@
>;
};
- main_usbss0_pins_default: main-usbss0-pins-default {
+ vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
pinctrl-single,pins = <
- J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
+ J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */
>;
};
+};
- vdd_sd_dv_pins_default: vdd-sd-dv-pins-default {
+&main_pmx1 {
+ main_usbss0_pins_default: main-usbss0-default-pins {
pinctrl-single,pins = <
- J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */
+ J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
>;
};
};
@@ -147,11 +202,30 @@
&wkup_uart0 {
/* Wakeup UART is used by System firmware */
status = "reserved";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&mcu_uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_uart0_pins_default>;
+ clock-frequency = <96000000>;
};
&main_uart0 {
+ status = "okay";
/* Shared with ATF on this platform */
power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_uart0_pins_default>;
+};
+
+&main_uart1 {
+ status = "okay";
+ /* Default pinmux */
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_uart1_pins_default>;
};
&main_uart2 {
@@ -160,59 +234,25 @@
};
&main_uart3 {
- /* UART not brought out */
- status = "disabled";
-};
-
-&main_uart4 {
- /* UART not brought out */
- status = "disabled";
-};
-
-&main_uart5 {
- /* UART not brought out */
- status = "disabled";
-};
-
-&main_uart6 {
- /* UART not brought out */
- status = "disabled";
-};
-
-&main_uart7 {
- /* UART not brought out */
- status = "disabled";
-};
-
-&main_uart8 {
- /* UART not brought out */
- status = "disabled";
-};
-
-&main_uart9 {
- /* UART not brought out */
- status = "disabled";
-};
-
-&main_gpio2 {
- status = "disabled";
-};
-
-&main_gpio4 {
- status = "disabled";
+ /* Shared with MCAN Interface */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_uart3_pins_default>;
};
-&main_gpio6 {
- status = "disabled";
+&main_gpio0 {
+ status = "okay";
};
-&wkup_gpio1 {
- status = "disabled";
+&wkup_gpio0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_gpio_pins_default>;
};
&mcu_cpsw {
pinctrl-names = "default";
- pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+ pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
};
&davinci_mdio {
@@ -229,6 +269,7 @@
};
&main_i2c0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
@@ -256,6 +297,7 @@
* The i2c1 of the CPB (as it is labeled) is not connected to j7200.
*/
&main_i2c1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
@@ -273,6 +315,7 @@
&main_sdhci0 {
/* eMMC */
+ status = "okay";
non-removable;
ti,driver-strength-ohm = <50>;
disable-wp;
@@ -280,6 +323,7 @@
&main_sdhci1 {
/* SD card */
+ status = "okay";
pinctrl-0 = <&main_mmc1_pins_default>;
pinctrl-names = "default";
vmmc-supply = <&vdd_mmc1>;
diff --git a/arch/arm/dts/k3-j7200-main.dtsi b/arch/arm/dts/k3-j7200-main.dtsi
index e8a41d09b4..cdb1d6b2a9 100644
--- a/arch/arm/dts/k3-j7200-main.dtsi
+++ b/arch/arm/dts/k3-j7200-main.dtsi
@@ -32,13 +32,20 @@
#size-cells = <1>;
ranges = <0x00 0x00 0x00100000 0x1c000>;
- serdes_ln_ctrl: serdes-ln-ctrl at 4080 {
+ serdes_ln_ctrl: mux-controller at 4080 {
compatible = "mmio-mux";
#mux-control-cells = <1>;
mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
<0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */
};
+ cpsw0_phy_gmii_sel: phy at 4044 {
+ compatible = "ti,j7200-cpsw5g-phy-gmii-sel";
+ ti,qsgmii-main-ports = <1>;
+ reg = <0x4044 0x10>;
+ #phy-cells = <1>;
+ };
+
usb_serdes_mux: mux-controller at 4000 {
compatible = "mmio-mux";
#mux-control-cells = <1>;
@@ -54,7 +61,10 @@
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
- <0x00 0x01900000 0x00 0x100000>; /* GICR */
+ <0x00 0x01900000 0x00 0x100000>, /* GICR */
+ <0x00 0x6f000000 0x00 0x2000>, /* GICC */
+ <0x00 0x6f010000 0x00 0x1000>, /* GICH */
+ <0x00 0x6f020000 0x00 0x2000>; /* GICV */
/* vcpumntirq: virtual CPU interface maintenance interrupt */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -139,6 +149,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
};
mailbox0_cluster1: mailbox at 31f81000 {
@@ -148,6 +159,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
};
mailbox0_cluster2: mailbox at 31f82000 {
@@ -157,6 +169,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
};
mailbox0_cluster3: mailbox at 31f83000 {
@@ -166,6 +179,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
};
mailbox0_cluster4: mailbox at 31f84000 {
@@ -175,6 +189,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
};
mailbox0_cluster5: mailbox at 31f85000 {
@@ -184,6 +199,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
};
mailbox0_cluster6: mailbox at 31f86000 {
@@ -193,6 +209,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
};
mailbox0_cluster7: mailbox at 31f87000 {
@@ -202,6 +219,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
};
mailbox0_cluster8: mailbox at 31f88000 {
@@ -211,6 +229,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
};
mailbox0_cluster9: mailbox at 31f89000 {
@@ -220,6 +239,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
};
mailbox0_cluster10: mailbox at 31f8a000 {
@@ -229,6 +249,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
};
mailbox0_cluster11: mailbox at 31f8b000 {
@@ -238,15 +259,17 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
};
main_ringacc: ringacc at 3c000000 {
compatible = "ti,am654-navss-ringacc";
- reg = <0x00 0x3c000000 0x00 0x400000>,
- <0x00 0x38000000 0x00 0x400000>,
- <0x00 0x31120000 0x00 0x100>,
- <0x00 0x33000000 0x00 0x40000>;
- reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ reg = <0x00 0x3c000000 0x00 0x400000>,
+ <0x00 0x38000000 0x00 0x400000>,
+ <0x00 0x31120000 0x00 0x100>,
+ <0x00 0x33000000 0x00 0x40000>,
+ <0x00 0x31080000 0x00 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
ti,num-rings = <1024>;
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
ti,sci = <&dmsc>;
@@ -256,9 +279,9 @@
main_udmap: dma-controller at 31150000 {
compatible = "ti,j721e-navss-main-udmap";
- reg = <0x00 0x31150000 0x00 0x100>,
- <0x00 0x34000000 0x00 0x100000>,
- <0x00 0x35000000 0x00 0x100000>;
+ reg = <0x00 0x31150000 0x00 0x100>,
+ <0x00 0x34000000 0x00 0x100000>,
+ <0x00 0x35000000 0x00 0x100000>;
reg-names = "gcfg", "rchanrt", "tchanrt";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
@@ -289,10 +312,118 @@
};
};
+ cpsw0: ethernet at c000000 {
+ compatible = "ti,j7200-cpswxg-nuss";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x00 0xc000000 0x00 0x200000>;
+ reg-names = "cpsw_nuss";
+ ranges = <0x00 0x00 0x00 0xc000000 0x00 0x200000>;
+ clocks = <&k3_clks 19 33>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 19 TI_SCI_PD_EXCLUSIVE>;
+
+ dmas = <&main_udmap 0xca00>,
+ <&main_udmap 0xca01>,
+ <&main_udmap 0xca02>,
+ <&main_udmap 0xca03>,
+ <&main_udmap 0xca04>,
+ <&main_udmap 0xca05>,
+ <&main_udmap 0xca06>,
+ <&main_udmap 0xca07>,
+ <&main_udmap 0x4a00>;
+ dma-names = "tx0", "tx1", "tx2", "tx3",
+ "tx4", "tx5", "tx6", "tx7",
+ "rx";
+
+ status = "disabled";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpsw0_port1: port at 1 {
+ reg = <1>;
+ ti,mac-only;
+ label = "port1";
+ status = "disabled";
+ };
+
+ cpsw0_port2: port at 2 {
+ reg = <2>;
+ ti,mac-only;
+ label = "port2";
+ status = "disabled";
+ };
+
+ cpsw0_port3: port at 3 {
+ reg = <3>;
+ ti,mac-only;
+ label = "port3";
+ status = "disabled";
+ };
+
+ cpsw0_port4: port at 4 {
+ reg = <4>;
+ ti,mac-only;
+ label = "port4";
+ status = "disabled";
+ };
+ };
+
+ cpsw5g_mdio: mdio at f00 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ reg = <0x00 0xf00 0x00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 19 33>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ status = "disabled";
+ };
+
+ cpts at 3d000 {
+ compatible = "ti,j721e-cpts";
+ reg = <0x00 0x3d000 0x00 0x400>;
+ clocks = <&k3_clks 19 16>;
+ clock-names = "cpts";
+ interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cpts";
+ ti,cpts-ext-ts-inputs = <4>;
+ ti,cpts-periodic-outputs = <2>;
+ };
+ };
+
+ /* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+ main_timerio_input: pinctrl at 104200 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0x104200 0x0 0x50>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x000001ff>;
+ };
+
+ /* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+ main_timerio_output: pinctrl at 104280 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0x104280 0x0 0x20>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x0000001f>;
+ };
+
main_pmx0: pinctrl at 11c000 {
compatible = "pinctrl-single";
/* Proxy 0 addressing */
- reg = <0x00 0x11c000 0x00 0x2b4>;
+ reg = <0x00 0x11c000 0x00 0x10c>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ main_pmx1: pinctrl at 11c11c {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x11c11c 0x00 0xc>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
@@ -307,6 +438,7 @@
power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 146 2>;
clock-names = "fclk";
+ status = "disabled";
};
main_uart1: serial at 2810000 {
@@ -318,6 +450,7 @@
power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 278 2>;
clock-names = "fclk";
+ status = "disabled";
};
main_uart2: serial at 2820000 {
@@ -329,6 +462,7 @@
power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 279 2>;
clock-names = "fclk";
+ status = "disabled";
};
main_uart3: serial at 2830000 {
@@ -340,6 +474,7 @@
power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 280 2>;
clock-names = "fclk";
+ status = "disabled";
};
main_uart4: serial at 2840000 {
@@ -351,6 +486,7 @@
power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 281 2>;
clock-names = "fclk";
+ status = "disabled";
};
main_uart5: serial at 2850000 {
@@ -362,6 +498,7 @@
power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 282 2>;
clock-names = "fclk";
+ status = "disabled";
};
main_uart6: serial at 2860000 {
@@ -373,6 +510,7 @@
power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 283 2>;
clock-names = "fclk";
+ status = "disabled";
};
main_uart7: serial at 2870000 {
@@ -384,6 +522,7 @@
power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 284 2>;
clock-names = "fclk";
+ status = "disabled";
};
main_uart8: serial at 2880000 {
@@ -395,6 +534,7 @@
power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 285 2>;
clock-names = "fclk";
+ status = "disabled";
};
main_uart9: serial at 2890000 {
@@ -406,6 +546,7 @@
power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 286 2>;
clock-names = "fclk";
+ status = "disabled";
};
main_i2c0: i2c at 2000000 {
@@ -417,6 +558,7 @@
clock-names = "fck";
clocks = <&k3_clks 187 1>;
power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+ status = "disabled";
};
main_i2c1: i2c at 2010000 {
@@ -428,6 +570,7 @@
clock-names = "fck";
clocks = <&k3_clks 188 1>;
power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c2: i2c at 2020000 {
@@ -439,6 +582,7 @@
clock-names = "fck";
clocks = <&k3_clks 189 1>;
power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c3: i2c at 2030000 {
@@ -450,6 +594,7 @@
clock-names = "fck";
clocks = <&k3_clks 190 1>;
power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c4: i2c at 2040000 {
@@ -461,6 +606,7 @@
clock-names = "fck";
clocks = <&k3_clks 191 1>;
power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c5: i2c at 2050000 {
@@ -472,6 +618,7 @@
clock-names = "fck";
clocks = <&k3_clks 192 1>;
power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c6: i2c at 2060000 {
@@ -483,6 +630,7 @@
clock-names = "fck";
clocks = <&k3_clks 193 1>;
power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_sdhci0: mmc at 4f80000 {
@@ -507,6 +655,7 @@
mmc-hs200-1_8v;
mmc-hs400-1_8v;
dma-coherent;
+ status = "disabled";
};
main_sdhci1: mmc at 4fb0000 {
@@ -530,6 +679,7 @@
ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x8>;
dma-coherent;
+ status = "disabled";
};
serdes_wiz0: wiz at 5060000 {
@@ -606,10 +756,10 @@
clock-names = "fck";
#address-cells = <3>;
#size-cells = <2>;
- bus-range = <0x0 0xf>;
+ bus-range = <0x0 0xff>;
cdns,no-bar-match-nbits = <64>;
- vendor-id = /bits/ 16 <0x104c>;
- device-id = /bits/ 16 <0xb00f>;
+ vendor-id = <0x104c>;
+ device-id = <0xb00f>;
msi-map = <0x0 &gic_its 0x0 0x10000>;
dma-coherent;
ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>,
@@ -633,6 +783,7 @@
clocks = <&k3_clks 240 6>;
clock-names = "fck";
max-functions = /bits/ 8 <6>;
+ max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
dma-coherent;
};
@@ -682,6 +833,7 @@
power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 105 0>;
clock-names = "gpio";
+ status = "disabled";
};
main_gpio2: gpio at 610000 {
@@ -699,6 +851,7 @@
power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 107 0>;
clock-names = "gpio";
+ status = "disabled";
};
main_gpio4: gpio at 620000 {
@@ -716,6 +869,7 @@
power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 109 0>;
clock-names = "gpio";
+ status = "disabled";
};
main_gpio6: gpio at 630000 {
@@ -733,6 +887,353 @@
power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 111 0>;
clock-names = "gpio";
+ status = "disabled";
+ };
+
+ main_spi0: spi at 2100000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02100000 0x00 0x400>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 266 1>;
+ status = "disabled";
+ };
+
+ main_spi1: spi at 2110000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02110000 0x00 0x400>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 267 1>;
+ status = "disabled";
+ };
+
+ main_spi2: spi at 2120000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02120000 0x00 0x400>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 268 1>;
+ status = "disabled";
+ };
+
+ main_spi3: spi at 2130000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02130000 0x00 0x400>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 269 1>;
+ status = "disabled";
+ };
+
+ main_spi4: spi at 2140000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02140000 0x00 0x400>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 270 1>;
+ status = "disabled";
+ };
+
+ main_spi5: spi at 2150000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02150000 0x00 0x400>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 271 1>;
+ status = "disabled";
+ };
+
+ main_spi6: spi at 2160000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02160000 0x00 0x400>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 272 1>;
+ status = "disabled";
+ };
+
+ main_spi7: spi at 2170000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02170000 0x00 0x400>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 273 1>;
+ status = "disabled";
+ };
+
+ watchdog0: watchdog at 2200000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x0 0x2200000 0x0 0x100>;
+ clocks = <&k3_clks 252 1>;
+ power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 252 1>;
+ assigned-clock-parents = <&k3_clks 252 5>;
+ };
+
+ watchdog1: watchdog at 2210000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x0 0x2210000 0x0 0x100>;
+ clocks = <&k3_clks 253 1>;
+ power-domains = <&k3_pds 253 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 253 1>;
+ assigned-clock-parents = <&k3_clks 253 5>;
+ };
+
+ main_timer0: timer at 2400000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2400000 0x00 0x400>;
+ interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 49 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 49 1>;
+ assigned-clock-parents = <&k3_clks 49 2>;
+ power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer1: timer at 2410000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2410000 0x00 0x400>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 50 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 50 1>, <&k3_clks 313 0>;
+ assigned-clock-parents = <&k3_clks 50 2>, <&k3_clks 313 1>;
+ power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer2: timer at 2420000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2420000 0x00 0x400>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 51 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 51 1>;
+ assigned-clock-parents = <&k3_clks 51 2>;
+ power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer3: timer at 2430000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2430000 0x00 0x400>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 52 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 52 1>, <&k3_clks 314 0>;
+ assigned-clock-parents = <&k3_clks 52 2>, <&k3_clks 314 1>;
+ power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer4: timer at 2440000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2440000 0x00 0x400>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 53 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 53 1>;
+ assigned-clock-parents = <&k3_clks 53 2>;
+ power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer5: timer at 2450000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2450000 0x00 0x400>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 54 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 54 1>, <&k3_clks 315 0>;
+ assigned-clock-parents = <&k3_clks 54 2>, <&k3_clks 315 1>;
+ power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer6: timer at 2460000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2460000 0x00 0x400>;
+ interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 55 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 55 1>;
+ assigned-clock-parents = <&k3_clks 55 2>;
+ power-domains = <&k3_pds 55 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer7: timer at 2470000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2470000 0x00 0x400>;
+ interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 57 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 57 1>, <&k3_clks 316 0>;
+ assigned-clock-parents = <&k3_clks 57 2>, <&k3_clks 316 1>;
+ power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer8: timer at 2480000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2480000 0x00 0x400>;
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 58 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 58 1>;
+ assigned-clock-parents = <&k3_clks 58 2>;
+ power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer9: timer at 2490000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2490000 0x00 0x400>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 59 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 59 1>, <&k3_clks 317 0>;
+ assigned-clock-parents = <&k3_clks 59 2>, <&k3_clks 317 1>;
+ power-domains = <&k3_pds 59 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer10: timer at 24a0000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x24a0000 0x00 0x400>;
+ interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 60 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 60 1>;
+ assigned-clock-parents = <&k3_clks 60 2>;
+ power-domains = <&k3_pds 60 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer11: timer at 24b0000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x24b0000 0x00 0x400>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 62 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 62 1>, <&k3_clks 318 0>;
+ assigned-clock-parents = <&k3_clks 62 2>, <&k3_clks 318 1>;
+ power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer12: timer at 24c0000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x24c0000 0x00 0x400>;
+ interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 63 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 63 1>;
+ assigned-clock-parents = <&k3_clks 63 2>;
+ power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer13: timer at 24d0000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x24d0000 0x00 0x400>;
+ interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 64 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 64 1>, <&k3_clks 319 0>;
+ assigned-clock-parents = <&k3_clks 64 2>, <&k3_clks 319 1>;
+ power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer14: timer at 24e0000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x24e0000 0x00 0x400>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 65 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 65 1>;
+ assigned-clock-parents = <&k3_clks 65 2>;
+ power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer15: timer at 24f0000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x24f0000 0x00 0x400>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 66 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 66 1>, <&k3_clks 320 0>;
+ assigned-clock-parents = <&k3_clks 66 2>, <&k3_clks 320 1>;
+ power-domains = <&k3_pds 66 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer16: timer at 2500000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2500000 0x00 0x400>;
+ interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 67 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 67 1>;
+ assigned-clock-parents = <&k3_clks 67 2>;
+ power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer17: timer at 2510000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2510000 0x00 0x400>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 68 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 68 1>, <&k3_clks 321 0>;
+ assigned-clock-parents = <&k3_clks 68 2>, <&k3_clks 321 1>;
+ power-domains = <&k3_pds 68 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer18: timer at 2520000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2520000 0x00 0x400>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 69 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 69 1>;
+ assigned-clock-parents = <&k3_clks 69 2>;
+ power-domains = <&k3_pds 69 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer19: timer at 2530000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2530000 0x00 0x400>;
+ interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 70 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 70 1>, <&k3_clks 322 0>;
+ assigned-clock-parents = <&k3_clks 70 2>, <&k3_clks 322 1>;
+ power-domains = <&k3_pds 70 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
};
main_r5fss0: r5fss at 5c00000 {
@@ -774,4 +1275,10 @@
ti,loczrama = <1>;
};
};
+
+ main_esm: esm at 700000 {
+ compatible = "ti,j721e-esm";
+ reg = <0x0 0x700000 0x0 0x1000>;
+ ti,esm-pins = <656>, <657>;
+ };
};
diff --git a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
index 1044ec6c4b..6ffaf85fa6 100644
--- a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
@@ -12,8 +12,8 @@
mbox-names = "rx", "tx";
- mboxes= <&secure_proxy_main 11>,
- <&secure_proxy_main 13>;
+ mboxes = <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
reg-names = "debug_messages";
reg = <0x00 0x44083000 0x00 0x1000>;
@@ -34,6 +34,136 @@
};
};
+ mcu_timer0: timer at 40400000 {
+ status = "reserved";
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x40400000 0x00 0x400>;
+ interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 35 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 35 1>;
+ assigned-clock-parents = <&k3_clks 35 2>;
+ power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ mcu_timer1: timer at 40410000 {
+ status = "reserved";
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x40410000 0x00 0x400>;
+ interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 71 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 71 1>, <&k3_clks 308 0>;
+ assigned-clock-parents = <&k3_clks 71 2>, <&k3_clks 308 1>;
+ power-domains = <&k3_pds 71 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ mcu_timer2: timer at 40420000 {
+ status = "reserved";
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x40420000 0x00 0x400>;
+ interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 72 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 72 1>;
+ assigned-clock-parents = <&k3_clks 72 2>;
+ power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ mcu_timer3: timer at 40430000 {
+ status = "reserved";
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x40430000 0x00 0x400>;
+ interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 73 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 73 1>, <&k3_clks 309 0>;
+ assigned-clock-parents = <&k3_clks 73 2>, <&k3_clks 309 1>;
+ power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ mcu_timer4: timer at 40440000 {
+ status = "reserved";
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x40440000 0x00 0x400>;
+ interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 74 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 74 1>;
+ assigned-clock-parents = <&k3_clks 74 2>;
+ power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ mcu_timer5: timer at 40450000 {
+ status = "reserved";
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x40450000 0x00 0x400>;
+ interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 75 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 75 1>, <&k3_clks 310 0>;
+ assigned-clock-parents = <&k3_clks 75 2>, <&k3_clks 310 1>;
+ power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ mcu_timer6: timer at 40460000 {
+ status = "reserved";
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x40460000 0x00 0x400>;
+ interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 76 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 76 1>;
+ assigned-clock-parents = <&k3_clks 76 2>;
+ power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ mcu_timer7: timer at 40470000 {
+ status = "reserved";
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x40470000 0x00 0x400>;
+ interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 77 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 77 1>, <&k3_clks 311 0>;
+ assigned-clock-parents = <&k3_clks 77 2>, <&k3_clks 311 1>;
+ power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ mcu_timer8: timer at 40480000 {
+ status = "reserved";
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x40480000 0x00 0x400>;
+ interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 78 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 78 1>;
+ assigned-clock-parents = <&k3_clks 78 2>;
+ power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ mcu_timer9: timer at 40490000 {
+ status = "reserved";
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x40490000 0x00 0x400>;
+ interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 79 1>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 79 1>, <&k3_clks 312 0>;
+ assigned-clock-parents = <&k3_clks 79 2>, <&k3_clks 312 1>;
+ power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
mcu_conf: syscon at 40f00000 {
compatible = "syscon", "simple-mfd";
reg = <0x00 0x40f00000 0x00 0x20000>;
@@ -53,10 +183,57 @@
reg = <0x00 0x43000014 0x00 0x4>;
};
+ /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+ mcu_timerio_input: pinctrl at 40f04200 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0x40f04200 0x0 0x28>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x0000000F>;
+ status = "reserved";
+ };
+
+ /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+ mcu_timerio_output: pinctrl at 40f04280 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0x40f04280 0x0 0x28>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x0000000F>;
+ status = "reserved";
+ };
+
wkup_pmx0: pinctrl at 4301c000 {
compatible = "pinctrl-single";
/* Proxy 0 addressing */
- reg = <0x00 0x4301c000 0x00 0x178>;
+ reg = <0x00 0x4301c000 0x00 0x34>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ wkup_pmx1: pinctrl at 4301c038 {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x4301c038 0x00 0x8>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ wkup_pmx2: pinctrl at 4301c068 {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x4301c068 0x00 0xec>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ wkup_pmx3: pinctrl at 4301c174 {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x4301c174 0x00 0x20>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
@@ -79,6 +256,7 @@
power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 287 2>;
clock-names = "fclk";
+ status = "disabled";
};
mcu_uart0: serial at 40a00000 {
@@ -90,6 +268,7 @@
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 149 2>;
clock-names = "fclk";
+ status = "disabled";
};
wkup_gpio_intr: interrupt-controller at 42200000 {
@@ -118,6 +297,7 @@
power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 113 0>;
clock-names = "gpio";
+ status = "disabled";
};
wkup_gpio1: gpio at 42100000 {
@@ -134,6 +314,7 @@
power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 114 0>;
clock-names = "gpio";
+ status = "disabled";
};
mcu_navss: bus at 28380000 {
@@ -147,11 +328,13 @@
mcu_ringacc: ringacc at 2b800000 {
compatible = "ti,am654-navss-ringacc";
- reg = <0x00 0x2b800000 0x00 0x400000>,
- <0x00 0x2b000000 0x00 0x400000>,
- <0x00 0x28590000 0x00 0x100>,
- <0x00 0x2a500000 0x00 0x40000>;
- reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ reg = <0x00 0x2b800000 0x00 0x400000>,
+ <0x00 0x2b000000 0x00 0x400000>,
+ <0x00 0x28590000 0x00 0x100>,
+ <0x00 0x2a500000 0x00 0x40000>,
+ <0x00 0x28440000 0x00 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg",
+ "proxy_target", "cfg";
ti,num-rings = <286>;
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
ti,sci = <&dmsc>;
@@ -161,9 +344,9 @@
mcu_udmap: dma-controller at 285c0000 {
compatible = "ti,j721e-navss-mcu-udmap";
- reg = <0x00 0x285c0000 0x00 0x100>,
- <0x00 0x2a800000 0x00 0x40000>,
- <0x00 0x2aa00000 0x00 0x40000>;
+ reg = <0x00 0x285c0000 0x00 0x100>,
+ <0x00 0x2a800000 0x00 0x40000>,
+ <0x00 0x2aa00000 0x00 0x40000>;
reg-names = "gcfg", "rchanrt", "tchanrt";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
@@ -180,6 +363,21 @@
};
};
+ secure_proxy_mcu: mailbox at 2a480000 {
+ compatible = "ti,am654-secure-proxy";
+ #mbox-cells = <1>;
+ reg-names = "target_data", "rt", "scfg";
+ reg = <0x0 0x2a480000 0x0 0x80000>,
+ <0x0 0x2a380000 0x0 0x80000>,
+ <0x0 0x2a400000 0x0 0x80000>;
+ /*
+ * Marked Disabled:
+ * Node is incomplete as it is meant for bootloaders and
+ * firmware on non-MPU processors
+ */
+ status = "disabled";
+ };
+
mcu_cpsw: ethernet at 46000000 {
compatible = "ti,j721e-cpsw-nuss";
#address-cells = <2>;
@@ -249,6 +447,7 @@
clock-names = "fck";
clocks = <&k3_clks 194 1>;
power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
mcu_i2c1: i2c at 40b10000 {
@@ -260,6 +459,7 @@
clock-names = "fck";
clocks = <&k3_clks 195 1>;
power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
wkup_i2c0: i2c at 42120000 {
@@ -271,6 +471,40 @@
clock-names = "fck";
clocks = <&k3_clks 197 1>;
power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+ status = "disabled";
+ };
+
+ mcu_spi0: spi at 40300000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x040300000 0x00 0x400>;
+ interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 274 0>;
+ status = "disabled";
+ };
+
+ mcu_spi1: spi at 40310000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x040310000 0x00 0x400>;
+ interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 275 0>;
+ status = "disabled";
+ };
+
+ mcu_spi2: spi at 40320000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x040320000 0x00 0x400>;
+ interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 276 0>;
+ status = "disabled";
};
fss: syscon at 47000000 {
@@ -314,6 +548,7 @@
power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
};
@@ -325,7 +560,7 @@
clocks = <&k3_clks 0 1>;
assigned-clocks = <&k3_clks 0 3>;
assigned-clock-rates = <60000000>;
- clock-names = "adc_tsc_fck";
+ clock-names = "fck";
dmas = <&main_udmap 0x7400>,
<&main_udmap 0x7401>;
dma-names = "fifo0", "fifo1";
@@ -375,4 +610,31 @@
ti,loczrama = <1>;
};
};
+
+ mcu_crypto: crypto at 40900000 {
+ compatible = "ti,j721e-sa2ul";
+ reg = <0x00 0x40900000 0x00 0x1200>;
+ power-domains = <&k3_pds 265 TI_SCI_PD_SHARED>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
+ dmas = <&mcu_udmap 0xf501>, <&mcu_udmap 0x7502>,
+ <&mcu_udmap 0x7503>;
+ dma-names = "tx", "rx1", "rx2";
+
+ rng: rng at 40910000 {
+ compatible = "inside-secure,safexcel-eip76";
+ reg = <0x00 0x40910000 0x00 0x7d>;
+ interrupts = <GIC_SPI 945 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled"; /* Used by OP-TEE */
+ };
+ };
+
+ wkup_vtm0: temperature-sensor at 42040000 {
+ compatible = "ti,j7200-vtm";
+ reg = <0x00 0x42040000 0x00 0x350>,
+ <0x00 0x42050000 0x00 0x350>;
+ power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+ #thermal-sensor-cells = <1>;
+ };
};
diff --git a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
index e62f9218e8..9469dca39f 100644
--- a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
+++ b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
@@ -1,13 +1,14 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2023 Texas Instruments Incorporated - https://www.ti.com/
*/
/dts-v1/;
-#include "k3-j7200-som-p0.dtsi"
+#include "k3-j7200-common-proc-board.dts"
#include "k3-j7200-ddr-evm-lp4-2666.dtsi"
#include "k3-j721e-ddr.dtsi"
+#include "k3-j7200-common-proc-board-u-boot.dtsi"
/ {
aliases {
@@ -15,17 +16,6 @@
remoteproc1 = &a72_0;
};
- chosen {
- stdout-path = &main_uart0;
- tick-timer = &timer1;
- firmware-loader = &fs_loader0;
- };
-
- fs_loader0: fs_loader at 0 {
- bootph-all;
- compatible = "u-boot,fs-loader";
- };
-
a72_0: a72 at 0 {
compatible = "ti,am654-rproc";
reg = <0x0 0x00a90000 0x0 0x10>;
@@ -39,21 +29,17 @@
ti,sci = <&dmsc>;
ti,sci-proc-id = <32>;
ti,sci-host-id = <10>;
- bootph-pre-ram;
- };
-
- clk_200mhz: dummy_clock_200mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- bootph-pre-ram;
+ bootph-all;
};
- clk_19_2mhz: dummy_clock_19_2mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- bootph-pre-ram;
+ dm_tifs: dm-tifs {
+ compatible = "ti,j721e-dm-sci";
+ ti,host-id = <3>;
+ ti,secure-host;
+ mbox-names = "rx", "tx";
+ mboxes = <&secure_proxy_mcu 21>,
+ <&secure_proxy_mcu 23>;
+ bootph-all;
};
};
@@ -61,275 +47,38 @@
power-domains = <&k3_pds 8 TI_SCI_PD_SHARED>,
<&k3_pds 90 TI_SCI_PD_SHARED>;
clocks = <&k3_clks 8 5>, <&k3_clks 30 9>;
+ bootph-all;
};
-&cbass_mcu_wakeup {
- mcu_secproxy: secproxy at 2a380000 {
- bootph-pre-ram;
- compatible = "ti,am654-secure-proxy";
- reg = <0x0 0x2a380000 0x0 0x80000>,
- <0x0 0x2a400000 0x0 0x80000>,
- <0x0 0x2a480000 0x0 0x80000>;
- reg-names = "rt", "scfg", "target_data";
- #mbox-cells = <1>;
- };
+&mcu_timer0 {
+ clock-frequency = <25000000>;
+ bootph-all;
+};
+&secure_proxy_mcu {
+ bootph-all;
+ status = "okay";
+};
+
+&cbass_mcu_wakeup {
sysctrler: sysctrler {
- bootph-pre-ram;
compatible = "ti,am654-system-controller";
- mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>;
+ mboxes= <&secure_proxy_mcu 4>,
+ <&secure_proxy_mcu 5>;
mbox-names = "tx", "rx";
- };
-
- dm_tifs: dm-tifs {
- compatible = "ti,j721e-dm-sci";
- ti,host-id = <3>;
- ti,secure-host;
- mbox-names = "rx", "tx";
- mboxes= <&mcu_secproxy 21>,
- <&mcu_secproxy 23>;
- bootph-pre-ram;
- };
-
- wkup_vtm0: vtm at 42040000 {
- compatible = "ti,am654-vtm", "ti,j721e-avs";
- reg = <0x0 0x42040000 0x0 0x330>;
- power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
- #thermal-sensor-cells = <1>;
+ bootph-all;
};
};
&dmsc {
- mboxes= <&mcu_secproxy 8>, <&mcu_secproxy 6>, <&mcu_secproxy 5>;
+ mboxes = <&secure_proxy_mcu 8>,
+ <&secure_proxy_mcu 6>, <&secure_proxy_mcu 5>;
mbox-names = "tx", "rx", "notify";
ti,host-id = <4>;
ti,secure-host;
-};
-
-&wkup_pmx0 {
- bootph-pre-ram;
- wkup_uart0_pins_default: wkup_uart0_pins_default {
- bootph-pre-ram;
- pinctrl-single,pins = <
- J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
- J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
- >;
- };
-
- mcu_uart0_pins_default: mcu_uart0_pins_default {
- bootph-pre-ram;
- pinctrl-single,pins = <
- J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) WKUP_GPIO0_13.MCU_UART0_RXD */
- J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) WKUP_GPIO0_12.MCU_UART0_TXD */
- J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) WKUP_GPIO0_14.MCU_UART0_CTSn */
- J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) WKUP_GPIO0_15.MCU_UART0_RTSn */
- >;
- };
-
- wkup_i2c0_pins_default: wkup-i2c0-pins-default {
- pinctrl-single,pins = <
- J721E_WKUP_IOPAD(0x100, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
- J721E_WKUP_IOPAD(0x104, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
- >;
- };
-
- mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default {
- pinctrl-single,pins = <
- J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (E20) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */
- J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C21) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */
- J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (F19) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */
- J721E_WKUP_IOPAD(0x54, PIN_OUTPUT, 3) /* (E22) MCU_OSPI1_CSn1.MCU_HYPERBUS0_CSn1 */
- J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (E19) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */
- J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (D21) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */
- J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D20) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */
- J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (G19) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */
- J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (G20) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */
- J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (F20) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */
- J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (F21) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */
- J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (E21) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */
- J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (B22) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */
- J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (G21) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */
- >;
- };
-
- wkup_gpio_pins_default: wkup-gpio-pins-default {
- pinctrl-single,pins = <
- J721E_WKUP_IOPAD(0xd8, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_6 */
- >;
- };
-};
-
-&main_pmx0 {
- bootph-pre-ram;
-
- main_uart0_pins_default: main_uart0_pins_default {
- bootph-pre-ram;
- pinctrl-single,pins = <
- J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */
- J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */
- J721E_IOPAD(0xc0, PIN_INPUT, 2) /* (W3) SPI0_CS0.UART0_CTSn */
- J721E_IOPAD(0xc4, PIN_OUTPUT, 2) /* (U5) SPI0_CS1.UART0_RTSn */
- >;
- };
-
- main_i2c0_pins_default: main-i2c0-pins-default {
- bootph-pre-ram;
- pinctrl-single,pins = <
- J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
- J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
- >;
- };
-
- main_mmc1_pins_default: main_mmc1_pins_default {
- pinctrl-single,pins = <
- J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */
- J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */
- J721E_IOPAD(0xfc, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
- J721E_IOPAD(0xf8, PIN_INPUT, 0) /* (M19) MMC1_DAT0 */
- J721E_IOPAD(0xf4, PIN_INPUT, 0) /* (N21) MMC1_DAT1 */
- J721E_IOPAD(0xf0, PIN_INPUT, 0) /* (N20) MMC1_DAT2 */
- J721E_IOPAD(0xec, PIN_INPUT, 0) /* (N19) MMC1_DAT3 */
- J721E_IOPAD(0xe4, PIN_INPUT, 8) /* (V1) TIMER_IO0.MMC1_SDCD */
- >;
- };
-
- main_usbss0_pins_default: main_usbss0_pins_default {
- pinctrl-single,pins = <
- J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
- >;
- };
-};
-
-&wkup_uart0 {
- bootph-pre-ram;
- pinctrl-names = "default";
- pinctrl-0 = <&wkup_uart0_pins_default>;
- status = "okay";
-};
-
-&mcu_uart0 {
- /delete-property/ power-domains;
- /delete-property/ clocks;
- /delete-property/ clock-names;
- pinctrl-names = "default";
- pinctrl-0 = <&mcu_uart0_pins_default>;
- status = "okay";
- clock-frequency = <96000000>;
-};
-
-&main_uart0 {
- status = "okay";
- power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
- pinctrl-names = "default";
- pinctrl-0 = <&main_uart0_pins_default>;
- status = "okay";
-};
-
-&main_sdhci0 {
- /delete-property/ power-domains;
- /delete-property/ assigned-clocks;
- /delete-property/ assigned-clock-parents;
- pinctrl-0 = <&main_mmc1_pins_default>;
- pinctrl-names = "default";
- clock-names = "clk_xin";
- clocks = <&clk_200mhz>;
- ti,driver-strength-ohm = <50>;
- non-removable;
- bus-width = <8>;
-};
-
-&main_sdhci1 {
- /delete-property/ power-domains;
- /delete-property/ assigned-clocks;
- /delete-property/ assigned-clock-parents;
- clock-names = "clk_xin";
- clocks = <&clk_200mhz>;
- ti,driver-strength-ohm = <50>;
-};
-
-&wkup_i2c0 {
- bootph-pre-ram;
- lp876441: lp876441 at 4c {
- compatible = "ti,lp876441";
- reg = <0x4c>;
- bootph-pre-ram;
- pinctrl-names = "default";
- pinctrl-0 = <&wkup_i2c0_pins_default>;
- clock-frequency = <400000>;
-
- regulators: regulators {
- bootph-pre-ram;
- buck1_reg: buck1 {
- /*VDD_CPU_AVS_REG*/
- regulator-name = "buck1";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1250000>;
- regulator-always-on;
- regulator-boot-on;
- bootph-pre-ram;
- };
- };
- };
-
+ bootph-all;
};
&wkup_vtm0 {
- vdd-supply-2 = <&buck1_reg>;
- bootph-pre-ram;
-};
-
-&main_i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c0_pins_default>;
- clock-frequency = <400000>;
-
- exp1: gpio at 20 {
- compatible = "ti,tca6416";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- exp2: gpio at 22 {
- compatible = "ti,tca6424";
- reg = <0x22>;
- gpio-controller;
- #gpio-cells = <2>;
- };
+ bootph-all;
};
-
-&usbss0 {
- pinctrl-names = "default";
- pinctrl-0 = <&main_usbss0_pins_default>;
- ti,vbus-divider;
- ti,usb2-only;
-};
-
-&usb0 {
- dr_mode = "otg";
- maximum-speed = "high-speed";
-};
-
-&hbmc {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mcu_fss0_hpb0_pins_default>;
- reg = <0x0 0x47040000 0x0 0x100>,
- <0x0 0x50000000 0x0 0x8000000>;
- ranges = <0x0 0x0 0x0 0x50000000 0x4000000>, /* 64MB Flash on CS0 */
- <0x1 0x0 0x0 0x54000000 0x800000>; /* 8MB flash on CS1 */
-
- flash at 0,0 {
- compatible = "cypress,hyperflash", "cfi-flash";
- reg = <0x0 0x0 0x4000000>;
- };
-};
-
-&mcu_ringacc {
- ti,sci = <&dm_tifs>;
-};
-
-&mcu_udmap {
- ti,sci = <&dm_tifs>;
-};
-#include "k3-j7200-common-proc-board-u-boot.dtsi"
diff --git a/arch/arm/dts/k3-j7200-som-p0.dtsi b/arch/arm/dts/k3-j7200-som-p0.dtsi
index 3472444017..5a300d4c8b 100644
--- a/arch/arm/dts/k3-j7200-som-p0.dtsi
+++ b/arch/arm/dts/k3-j7200-som-p0.dtsi
@@ -83,7 +83,7 @@
};
&wkup_pmx0 {
- mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default {
+ mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (B6) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */
J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C8) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */
@@ -101,7 +101,7 @@
>;
};
- mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
@@ -118,8 +118,17 @@
};
};
+&wkup_pmx2 {
+ wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x98, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
+ J721E_WKUP_IOPAD(0x9c, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
+ >;
+ };
+};
+
&main_pmx0 {
- main_i2c0_pins_default: main-i2c0-pins-default {
+ main_i2c0_pins_default: main-i2c0-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
@@ -140,10 +149,42 @@
flash at 0,0 {
compatible = "cypress,hyperflash", "cfi-flash";
reg = <0x00 0x00 0x4000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "hbmc.tiboot3";
+ reg = <0x0 0x100000>;
+ };
+
+ partition at 100000 {
+ label = "hbmc.tispl";
+ reg = <0x100000 0x200000>;
+ };
+
+ partition at 300000 {
+ label = "hbmc.u-boot";
+ reg = <0x300000 0x400000>;
+ };
+
+ partition at 700000 {
+ label = "hbmc.env";
+ reg = <0x700000 0x40000>;
+ };
+
+ partition at 800000 {
+ label = "hbmc.rootfs";
+ reg = <0x800000 0x3800000>;
+ };
+ };
};
};
&mailbox0_cluster0 {
+ status = "okay";
interrupts = <436>;
mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
@@ -158,6 +199,7 @@
};
&mailbox0_cluster1 {
+ status = "okay";
interrupts = <432>;
mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
@@ -171,66 +213,26 @@
};
};
-&mailbox0_cluster2 {
- status = "disabled";
-};
-
-&mailbox0_cluster3 {
- status = "disabled";
-};
-
-&mailbox0_cluster4 {
- status = "disabled";
-};
-
-&mailbox0_cluster5 {
- status = "disabled";
-};
-
-&mailbox0_cluster6 {
- status = "disabled";
-};
-
-&mailbox0_cluster7 {
- status = "disabled";
-};
-
-&mailbox0_cluster8 {
- status = "disabled";
-};
-
-&mailbox0_cluster9 {
- status = "disabled";
-};
-
-&mailbox0_cluster10 {
- status = "disabled";
-};
-
-&mailbox0_cluster11 {
- status = "disabled";
-};
-
&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+ mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core0_memory_region>;
};
&mcu_r5fss0_core1 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+ mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
<&mcu_r5fss0_core1_memory_region>;
};
&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+ mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
memory-region = <&main_r5fss0_core0_dma_memory_region>,
<&main_r5fss0_core0_memory_region>;
};
&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+ mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
memory-region = <&main_r5fss0_core1_dma_memory_region>,
<&main_r5fss0_core1_memory_region>;
};
@@ -252,11 +254,24 @@
};
};
+&wkup_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_i2c0_pins_default>;
+ clock-frequency = <400000>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+};
+
&ospi0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
- flash at 0{
+ flash at 0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
@@ -267,7 +282,46 @@
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <4>;
- #address-cells = <1>;
- #size-cells = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "ospi.tiboot3";
+ reg = <0x0 0x100000>;
+ };
+
+ partition at 100000 {
+ label = "ospi.tispl";
+ reg = <0x100000 0x200000>;
+ };
+
+ partition at 300000 {
+ label = "ospi.u-boot";
+ reg = <0x300000 0x400000>;
+ };
+
+ partition at 700000 {
+ label = "ospi.env";
+ reg = <0x700000 0x40000>;
+ };
+
+ partition at 740000 {
+ label = "ospi.env.backup";
+ reg = <0x740000 0x40000>;
+ };
+
+ partition at 800000 {
+ label = "ospi.rootfs";
+ reg = <0x800000 0x37c0000>;
+ };
+
+ partition at 3fc0000 {
+ label = "ospi.phypattern";
+ reg = <0x3fc0000 0x40000>;
+ };
+ };
};
};
diff --git a/arch/arm/dts/k3-j7200-thermal.dtsi b/arch/arm/dts/k3-j7200-thermal.dtsi
new file mode 100644
index 0000000000..e7e3a643a6
--- /dev/null
+++ b/arch/arm/dts/k3-j7200-thermal.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+ mcu_thermal: mcu-thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <500>; /* milliseconds */
+ thermal-sensors = <&wkup_vtm0 0>;
+
+ trips {
+ wkup_crit: wkup-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ mpu_thermal: mpu-thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <500>; /* milliseconds */
+ thermal-sensors = <&wkup_vtm0 1>;
+
+ trips {
+ mpu_crit: mpu-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ main_thermal: main-thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <500>; /* milliseconds */
+ thermal-sensors = <&wkup_vtm0 2>;
+
+ trips {
+ c7x_crit: c7x-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+};
diff --git a/arch/arm/dts/k3-j7200.dtsi b/arch/arm/dts/k3-j7200.dtsi
index b7005b8031..ef73e6d7e8 100644
--- a/arch/arm/dts/k3-j7200.dtsi
+++ b/arch/arm/dts/k3-j7200.dtsi
@@ -7,9 +7,10 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
#include <dt-bindings/soc/ti,sci_pm_domain.h>
+#include "k3-pinctrl.h"
+
/ {
model = "Texas Instruments K3 J7200 SoC";
compatible = "ti,j7200";
@@ -17,21 +18,6 @@
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- serial0 = &wkup_uart0;
- serial1 = &mcu_uart0;
- serial2 = &main_uart0;
- serial3 = &main_uart1;
- serial4 = &main_uart2;
- serial5 = &main_uart3;
- serial6 = &main_uart4;
- serial7 = &main_uart5;
- serial8 = &main_uart6;
- serial9 = &main_uart7;
- serial10 = &main_uart8;
- serial11 = &main_uart9;
- };
-
chosen { };
cpus {
@@ -60,7 +46,7 @@
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
- d-cache-sets = <128>;
+ d-cache-sets = <256>;
next-level-cache = <&L2_0>;
};
@@ -74,7 +60,7 @@
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
- d-cache-sets = <128>;
+ d-cache-sets = <256>;
next-level-cache = <&L2_0>;
};
};
@@ -82,15 +68,17 @@
L2_0: l2-cache0 {
compatible = "cache";
cache-level = <2>;
+ cache-unified;
cache-size = <0x100000>;
cache-line-size = <64>;
- cache-sets = <2048>;
+ cache-sets = <1024>;
next-level-cache = <&msmc_l3>;
};
msmc_l3: l3-cache0 {
compatible = "cache";
cache-level = <3>;
+ cache-unified;
};
firmware {
@@ -124,9 +112,11 @@
#size-cells = <2>;
ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
<0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+ <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
<0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
<0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
<0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+ <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
<0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
<0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
<0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
@@ -165,6 +155,8 @@
<0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3 */
};
};
+
+ #include "k3-j7200-thermal.dtsi"
};
/* Now include the peripherals for each bus segments */
--
2.34.1
More information about the U-Boot
mailing list