[PATCH v2 15/22] Kconfig: sunxi: prepare for using drivers/ram/sunxi
Samuel Holland
samuel at sholland.org
Sun Oct 22 05:44:11 CEST 2023
Hi Andre,
On 9/28/23 16:54, Andre Przywara wrote:
> At the moment all Allwinner DRAM initialisation routines are stored in
> arch/arm/mach-sunxi, even though those "drivers" are just a giant
> collection of writel's, without any architectural dependency.
>
> The R528/T113-s SoC (with ARM cores) and the D1/D1s Soc (with RISC-V
> cores) share the same die, so should share the same DRAM init routines as
> well.
>
> To prepare for this, add a new sunxi directory inside drivers/ram, and
> add some stub entries to prepare for the addition of the share DRAM code
> for those SoCs.
>
> The RISC-V D1(s) SoCs will probably use SPL_DM, so make this entry
> depend on that already.
>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
> drivers/ram/Kconfig | 3 ++-
> drivers/ram/sunxi/Kconfig | 14 ++++++++++++++
> 2 files changed, 16 insertions(+), 1 deletion(-)
> create mode 100644 drivers/ram/sunxi/Kconfig
>
> diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig
> index bf999645774..5b07e920301 100644
> --- a/drivers/ram/Kconfig
> +++ b/drivers/ram/Kconfig
> @@ -109,8 +109,9 @@ config IMXRT_SDRAM
>
> source "drivers/ram/aspeed/Kconfig"
> source "drivers/ram/cadence/Kconfig"
> +source "drivers/ram/octeon/Kconfig"
> source "drivers/ram/rockchip/Kconfig"
> source "drivers/ram/sifive/Kconfig"
> source "drivers/ram/stm32mp1/Kconfig"
> -source "drivers/ram/octeon/Kconfig"
> source "drivers/ram/starfive/Kconfig"
> +source "drivers/ram/sunxi/Kconfig"
> diff --git a/drivers/ram/sunxi/Kconfig b/drivers/ram/sunxi/Kconfig
> new file mode 100644
> index 00000000000..261d7f57409
> --- /dev/null
> +++ b/drivers/ram/sunxi/Kconfig
> @@ -0,0 +1,14 @@
> +config DRAM_SUN20I_D1
> + bool "DM DRAM driver support for Allwinner D1"
> + depends on RAM && ARCH_SUNXI
> + default y
> + help
> + This enables support for DRAM drivers using the driver model
> + for Allwinner SoCs.
> +
> +config DRAM_SUN8I_R528
> + bool "DRAM driver support for Allwinner R528/T113s"
> + depends on ARCH_SUNXI
> + default y if MACH_SUN8I_R528
> + help
> + Select this DRAM controller driver for the R528/T113s SoCs.
Please use a single Kconfig symbol for enabling the driver, whichever
name you choose. It doesn't need to depend on RAM -- you've already
#ifdef'd out the RAM parts. See my comments on the next patch.
Regards,
Samuel
More information about the U-Boot
mailing list