[RESEND PATCH 1/1] clk: ti: k3-pll: Add calibration support for non fractional mode

[Bryan Brattlof]

Hi Vishal!

+Tom

On October 23, 2023 thus sayeth Vishal Mahaveer:
> PLL calibration needs to be enabled when operating in non fractional
> mode. Add the sequence to do a fast calibration when using PLL
> in this mode.
> 
> Signed-off-by: Vishal Mahaveer <vishalm at ti.com>

Reviewed-by: Bryan Brattlof <bb at ti.com>

> ---
>  drivers/clk/ti/clk-k3-pll.c | 81 ++++++++++++++++++++++++++++++++++---
>  1 file changed, 75 insertions(+), 6 deletions(-)
> 

Thanks for fixing this! I've tested the am62x and the j721e and this 
appears to properly setup the PLLs without firmware's help after :)

~Bryan