[REGRESSION] imx: spl_imx_romapi: boot loops

[Fabio Estevam]

Hi Marcel,

On Tue, Oct 24, 2023 at 10:16 AM Marcel Ziswiler
<marcel.ziswiler at toradex.com> wrote:

> Yes, regular eMMC boot. Serial download also works for me (note this requires a patch still not merged upstream

I tried the top of tree U-Boot on the imx8mp-evk and I was not able to
reproduce the error here.

Below is the boot log from the SD card:

U-Boot SPL 2024.01-rc1-00054-gfb428b618194 (Oct 25 2023 - 09:17:12 -0300)
SEC0:  RNG instantiated
Normal Boot
WDT:   Started watchdog at 30280000 with servicing every 1000ms (60s timeout)
Trying to boot from BOOTROM
Boot Stage: Primary boot
image offset 0x8000, pagesize 0x200, ivt offset 0x0
NOTICE:  BL31: v2.6(release):lf-6.1.1-1.0.0-0-g616a4588f333
NOTICE:  BL31: Built : 10:38:04, Oct 12 2023


U-Boot 2024.01-rc1-00054-gfb428b618194 (Oct 25 2023 - 09:17:12 -0300)

CPU:   Freescale i.MX8MP[8] rev1.0 at 1200 MHz
Reset cause: POR
Model: NXP i.MX8MPlus EVK board
DRAM:  6 GiB
Core:  103 devices, 26 uclasses, devicetree: separate
WDT:   Started watchdog at 30280000 with servicing every 1000ms (60s timeout)
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial at 30890000
Out:   serial at 30890000
Err:   serial at 30890000
SEC0:  RNG instantiated
Net:
Error: ethernet at 30bf0000 address not set.

Error: ethernet at 30be0000 address not set.
Could not get PHY for FEC0: addr 1

Error: ethernet at 30bf0000 address not set.

Error: ethernet at 30bf0000 address not set.
No ethernet found.

Hit any key to stop autoboot:  0
u-boot=>