[REGRESSION] imx: spl_imx_romapi: boot loops

[Marcel Ziswiler]

Hi Fabio

Thanks!

On Wed, 2023-10-25 at 09:20 -0300, Fabio Estevam wrote:
> Hi Marcel,
> 
> On Tue, Oct 24, 2023 at 10:16 AM Marcel Ziswiler
> <marcel.ziswiler at toradex.com> wrote:
> 
> > Yes, regular eMMC boot. Serial download also works for me (note this requires a patch still not merged
> > upstream
> 
> I tried the top of tree U-Boot on the imx8mp-evk and I was not able to
> reproduce the error here.
> 
> Below is the boot log from the SD card:

Yes, it only seems to be an issue for the eMMC Fastboot case as that one has some special handling (whatever
that is).

> U-Boot SPL 2024.01-rc1-00054-gfb428b618194 (Oct 25 2023 - 09:17:12 -0300)
> SEC0:  RNG instantiated
> Normal Boot
> WDT:   Started watchdog at 30280000 with servicing every 1000ms (60s timeout)
> Trying to boot from BOOTROM
> Boot Stage: Primary boot
> image offset 0x8000, pagesize 0x200, ivt offset 0x0
> NOTICE:  BL31: v2.6(release):lf-6.1.1-1.0.0-0-g616a4588f333
> NOTICE:  BL31: Built : 10:38:04, Oct 12 2023
> 
> 
> U-Boot 2024.01-rc1-00054-gfb428b618194 (Oct 25 2023 - 09:17:12 -0300)
> 
> CPU:   Freescale i.MX8MP[8] rev1.0 at 1200 MHz
> Reset cause: POR
> Model: NXP i.MX8MPlus EVK board
> DRAM:  6 GiB
> Core:  103 devices, 26 uclasses, devicetree: separate
> WDT:   Started watchdog at 30280000 with servicing every 1000ms (60s timeout)
> MMC:   FSL_SDHC: 1, FSL_SDHC: 2
> Loading Environment from MMC... OK
> In:    serial at 30890000
> Out:   serial at 30890000
> Err:   serial at 30890000
> SEC0:  RNG instantiated
> Net:
> Error: ethernet at 30bf0000 address not set.
> 
> Error: ethernet at 30be0000 address not set.
> Could not get PHY for FEC0: addr 1
> 
> Error: ethernet at 30bf0000 address not set.
> 
> Error: ethernet at 30bf0000 address not set.
> No ethernet found.
> 
> Hit any key to stop autoboot:  0
> u-boot=>