[PATCH] Kconfig: Remove all default n/no options
Michal Simek
michal.simek at amd.com
Wed Oct 25 09:25:37 CEST 2023
Similar change was done by commit b4c2c151b14b ("Kconfig: Remove all
default n/no options") and again sync is required.
default n/no doesn't need to be specified. It is default option anyway.
Signed-off-by: Michal Simek <michal.simek at amd.com>
---
arch/arm/mach-imx/mxs/Kconfig | 2 --
arch/arm/mach-rockchip/Kconfig | 1 -
arch/arm/mach-snapdragon/Kconfig | 1 -
arch/arm/mach-sunxi/Kconfig | 1 -
arch/arm/mach-tegra/Kconfig | 1 -
arch/m68k/Kconfig | 1 -
arch/riscv/Kconfig | 1 -
board/asus/grouper/Kconfig | 2 --
board/asus/transformer-t30/Kconfig | 1 -
board/keymile/Kconfig | 3 ---
board/lg/x3-t30/Kconfig | 2 --
cmd/Kconfig | 3 ---
drivers/crypto/fsl/Kconfig | 1 -
drivers/memory/Kconfig | 1 -
drivers/misc/Kconfig | 1 -
drivers/mtd/nand/raw/Kconfig | 1 -
drivers/mtd/spi/Kconfig | 1 -
drivers/sm/Kconfig | 1 -
drivers/spi/Kconfig | 1 -
drivers/usb/host/Kconfig | 2 --
fs/ubifs/Kconfig | 1 -
21 files changed, 29 deletions(-)
diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig
index ccce6a78caa2..d2e4205c5ce5 100644
--- a/arch/arm/mach-imx/mxs/Kconfig
+++ b/arch/arm/mach-imx/mxs/Kconfig
@@ -54,7 +54,6 @@ config SYS_SOC
config SPL_MXS_PMU_MINIMAL_VDD5V_CURRENT
bool "Force minimal current draw from VDD5V by MX28 PMU"
- default n
help
After setting this option, the current drawn from VDD5V
by the PMU is reduced to zero - the DCDC_BATT is used as
@@ -62,7 +61,6 @@ config SPL_MXS_PMU_MINIMAL_VDD5V_CURRENT
config SPL_MXS_PMU_DISABLE_BATT_CHARGE
bool "Disable Battery Charging in MX28 PMU"
- default n
config SPL_MXS_PMU_ENABLE_4P2_LINEAR_REGULATOR
bool "Enable the 4P2 linear regulator in MX28 PMU"
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index c43c185c17c5..a6c69c300d00 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -450,7 +450,6 @@ config ROCKCHIP_BOOT_MODE_REG
config ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON
bool "Disable device boot on power plug-in"
depends on PMIC_RK8XX
- default n
---help---
Say Y here to prevent the device from booting up because of a plug-in
event. When set, the device will boot briefly to determine why it was
diff --git a/arch/arm/mach-snapdragon/Kconfig b/arch/arm/mach-snapdragon/Kconfig
index 0e073045be54..2fc1521e2d30 100644
--- a/arch/arm/mach-snapdragon/Kconfig
+++ b/arch/arm/mach-snapdragon/Kconfig
@@ -14,7 +14,6 @@ config SPL_SYS_MALLOC_F_LEN
config SDM845
bool "Qualcomm Snapdragon 845 SoC"
- default n
select LINUX_KERNEL_IMAGE_HEADER
config LNX_KRNL_IMG_TEXT_OFFSET_BASE
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 40ca7d7b3a99..a10e4c06b6a3 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -811,7 +811,6 @@ config AXP_GPIO
config AXP_DISABLE_BOOT_ON_POWERON
bool "Disable device boot on power plug-in"
depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
- default n
---help---
Say Y here to prevent the device from booting up because of a plug-in
event. When set, the device will boot into the SPL briefly to
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 464bd0798f62..0e94b84fe657 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -18,7 +18,6 @@ config TEGRA_CLKRST
config TEGRA_CRYPTO
bool "Tegra AES128 crypto module"
select AES
- default n
config TEGRA_GP_PADCTRL
bool
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 587edd50d7e8..b288c65e7fd1 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -200,7 +200,6 @@ source "board/sysam/stmark2/Kconfig"
config M68K_QEMU
bool "Build with workarounds for incomplete QEMU emulation"
- default n
help
QEMU 8.x currently does not implement RAMBAR accesses and
DMA timers. Enable this option for U-Boot CI purposes only
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index e291456530bd..8fc81fb284cd 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -68,7 +68,6 @@ config SPL_SYS_DCACHE_OFF
config SPL_ZERO_MEM_BEFORE_USE
bool "Zero memory before use"
depends on SPL
- default n
help
Zero stack/GD/malloc area in SPL before using them, this is needed for
Sifive core devices that uses L2 cache to store SPL.
diff --git a/board/asus/grouper/Kconfig b/board/asus/grouper/Kconfig
index 912c6c5fbae8..47d9bae94682 100644
--- a/board/asus/grouper/Kconfig
+++ b/board/asus/grouper/Kconfig
@@ -12,11 +12,9 @@ config SYS_CONFIG_NAME
config GROUPER_TPS65911
bool "Enable support TI TPS65911 PMIC"
select CMD_POWEROFF
- default n
config GROUPER_MAX77663
bool "Enable support MAXIM MAX77663 PMIC"
select CMD_POWEROFF
- default n
endif
diff --git a/board/asus/transformer-t30/Kconfig b/board/asus/transformer-t30/Kconfig
index 3c36f4ada206..accc999c435c 100644
--- a/board/asus/transformer-t30/Kconfig
+++ b/board/asus/transformer-t30/Kconfig
@@ -14,7 +14,6 @@ config TRANSFORMER_SPI_BOOT
select TEGRA20_SLINK
select DM_SPI_FLASH
select SPI_FLASH_WINBOND
- default n
help
Tegra 3 based Transformers with Windows RT have core
boot sequence (BCT and EBT) on separate SPI FLASH
diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig
index c6576aa6523a..f7e9b74f5782 100644
--- a/board/keymile/Kconfig
+++ b/board/keymile/Kconfig
@@ -125,7 +125,6 @@ config SYS_IVM_EEPROM_PAGE_LEN
config PG_WCOM_UBOOT_UPDATE_SUPPORTED
bool "Enable U-Boot Field Fail-Safe Update Functionality"
select EVENT
- default n
help
Indicates that field fail-safe u-boot update is supported.
This functionality works only for designs that are booting
@@ -133,7 +132,6 @@ config PG_WCOM_UBOOT_UPDATE_SUPPORTED
config PG_WCOM_UBOOT_BOOTPACKAGE
bool "U-Boot Is Part Of Factory Boot-Package Image"
- default n
help
Indicates that u-boot will be a part of the factory programmed
boot-package image.
@@ -149,7 +147,6 @@ config PG_WCOM_UBOOT_UPDATE_TEXT_BASE
config PG_WCOM_UBOOT_UPDATE
bool "U-Boot Is Part Of Factory Boot-Package Image"
- default n
help
Indicates that u-boot will be a part of the embedded software and
programmed at field.
diff --git a/board/lg/x3-t30/Kconfig b/board/lg/x3-t30/Kconfig
index 20ea4f5f3243..53d776019d65 100644
--- a/board/lg/x3-t30/Kconfig
+++ b/board/lg/x3-t30/Kconfig
@@ -11,14 +11,12 @@ config SYS_CONFIG_NAME
config DEVICE_P880
bool "Enable support for LG Optimus 4X HD"
- default n
help
LG Optimus 4X HD derives from x3 board but has slight
differences.
config DEVICE_P895
bool "Enable support for LG Optimus Vu"
- default n
help
LG Optimus Vu derives from x3 board but has slight
differences.
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 205df2f1fb65..60aed2c307ca 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -246,7 +246,6 @@ config CMD_BOOTM_PRE_LOAD
bool "enable pre-load on bootm"
depends on CMD_BOOTM
depends on IMAGE_PRE_LOAD
- default n
help
Enable support of stage pre-load for the bootm command.
This stage allow to check or modify the image provided
@@ -2360,7 +2359,6 @@ config CMD_VIDCONSOLE
config CMD_SELECT_FONT
bool "select font size"
depends on VIDEO
- default n
help
Enabling this will provide 'font' command.
Allows font selection at runtime.
@@ -2880,7 +2878,6 @@ config CMD_UBIFS
config MMC_SPEED_MODE_SET
bool "set speed mode using mmc command"
depends on CMD_MMC
- default n
help
Enable setting speed mode using mmc rescan and mmc dev commands.
The speed mode is provided as the last argument in these commands
diff --git a/drivers/crypto/fsl/Kconfig b/drivers/crypto/fsl/Kconfig
index 91a51cc5fe77..eaad19633f1d 100644
--- a/drivers/crypto/fsl/Kconfig
+++ b/drivers/crypto/fsl/Kconfig
@@ -77,7 +77,6 @@ endif
config FSL_DCP_RNG
bool "Enable Random Number Generator support"
depends on DM_RNG
- default n
help
Enable support for the hardware based random number generator
module of the DCP. It uses the True Random Number Generator (TRNG)
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 22cb9d637c5e..d10edd277467 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -61,7 +61,6 @@ config TI_GPMC
if TI_GPMC
config TI_GPMC_DEBUG
bool "Debug Texas Instruments GPMC timings"
- default n
help
Enable this to print GPMC timings before and after the GPMC registers
are programmed. This should not be left enabled on production systems.
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index fccd9b89b81b..97057de8bf92 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -375,7 +375,6 @@ config SPL_MXC_OCOTP
config NPCM_OTP
bool "Nnvoton NPCM BMC On-Chip OTP Memory Support"
depends on (ARM && ARCH_NPCM)
- default n
help
Support NPCM BMC OTP memory (fuse).
To compile this driver as a module, choose M here: the module
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 72547f00fbec..a13e6f59cbd2 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -614,7 +614,6 @@ config ROCKCHIP_NAND
config ROCKCHIP_NAND_SKIP_BBTSCAN
bool "Skip the automatic BBT scan with Rockchip NAND controllers"
depends on ROCKCHIP_NAND
- default n
help
Skip the automatic BBT scan with the NAND_SKIP_BBTSCAN
option when data content is not in MTD format or
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index a9617c6c58c1..76c424d75e9e 100644
--- a/drivers/mtd/spi/Kconfig
+++ b/drivers/mtd/spi/Kconfig
@@ -107,7 +107,6 @@ config SPI_FLASH_SMART_HWCAPS
config SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT
bool "Command extension type is INVERT for Software Reset on boot"
- default n
help
Because of SFDP information can not be get before boot.
So define command extension type is INVERT when Software Reset on boot only.
diff --git a/drivers/sm/Kconfig b/drivers/sm/Kconfig
index f0987275d265..926af2863308 100644
--- a/drivers/sm/Kconfig
+++ b/drivers/sm/Kconfig
@@ -4,6 +4,5 @@ config SM
config MESON_SM
bool "Amlogic Secure Monitor driver"
select SM
- default n
help
Say y here to enable the Amlogic secure monitor driver.
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 854b8b88daff..d1867c28758a 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -451,7 +451,6 @@ config SANDBOX_SPI_MAX_CS
config SPI_ASPEED_SMC
bool "ASPEED SPI flash controller driver"
depends on DM_SPI && SPI_MEM
- default n
help
Enable ASPEED SPI flash controller driver for AST2500
and AST2600 SoCs.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1a883babf4c2..b501ea514bca 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -231,7 +231,6 @@ config USB_EHCI_MXS
config USB_EHCI_NPCM
bool "Support for Nuvoton NPCM on-chip EHCI USB controller"
depends on ARCH_NPCM
- default n
---help---
Enables support for the on-chip EHCI controller on
Nuvoton NPCM chips.
@@ -368,7 +367,6 @@ config USB_OHCI_DA8XX
config USB_OHCI_NPCM
bool "Support for Nuvoton NPCM on-chip OHCI USB controller"
depends on ARCH_NPCM
- default n
---help---
Enables support for the on-chip OHCI controller on
Nuvoton NPCM chips.
diff --git a/fs/ubifs/Kconfig b/fs/ubifs/Kconfig
index 949b28841194..690e77ef8dcf 100644
--- a/fs/ubifs/Kconfig
+++ b/fs/ubifs/Kconfig
@@ -8,7 +8,6 @@ config UBIFS_SILENCE_MSG
config UBIFS_SILENCE_DEBUG_DUMP
bool "UBIFS silence debug dumps"
default y if UBIFS_SILENCE_MSG
- default n
help
Make the debug dumps from UBIFS stop printing.
This decreases size of U-Boot binary.
--
2.36.1
More information about the U-Boot
mailing list