[PATCH] Kconfig: Remove all default n/no options
Svyatoslav Ryhel
clamor95 at gmail.com
Wed Oct 25 10:55:32 CEST 2023
ср, 25 жовт. 2023 р. о 10:25 Michal Simek <michal.simek at amd.com> пише:
>
> Similar change was done by commit b4c2c151b14b ("Kconfig: Remove all
> default n/no options") and again sync is required.
>
> default n/no doesn't need to be specified. It is default option anyway.
>
> Signed-off-by: Michal Simek <michal.simek at amd.com>
> ---
>
> arch/arm/mach-imx/mxs/Kconfig | 2 --
> arch/arm/mach-rockchip/Kconfig | 1 -
> arch/arm/mach-snapdragon/Kconfig | 1 -
> arch/arm/mach-sunxi/Kconfig | 1 -
> arch/arm/mach-tegra/Kconfig | 1 -
> arch/m68k/Kconfig | 1 -
> arch/riscv/Kconfig | 1 -
> board/asus/grouper/Kconfig | 2 --
> board/asus/transformer-t30/Kconfig | 1 -
> board/keymile/Kconfig | 3 ---
> board/lg/x3-t30/Kconfig | 2 --
> cmd/Kconfig | 3 ---
> drivers/crypto/fsl/Kconfig | 1 -
> drivers/memory/Kconfig | 1 -
> drivers/misc/Kconfig | 1 -
> drivers/mtd/nand/raw/Kconfig | 1 -
> drivers/mtd/spi/Kconfig | 1 -
> drivers/sm/Kconfig | 1 -
> drivers/spi/Kconfig | 1 -
> drivers/usb/host/Kconfig | 2 --
> fs/ubifs/Kconfig | 1 -
> 21 files changed, 29 deletions(-)
>
> diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig
> index ccce6a78caa2..d2e4205c5ce5 100644
> --- a/arch/arm/mach-imx/mxs/Kconfig
> +++ b/arch/arm/mach-imx/mxs/Kconfig
> @@ -54,7 +54,6 @@ config SYS_SOC
>
> config SPL_MXS_PMU_MINIMAL_VDD5V_CURRENT
> bool "Force minimal current draw from VDD5V by MX28 PMU"
> - default n
> help
> After setting this option, the current drawn from VDD5V
> by the PMU is reduced to zero - the DCDC_BATT is used as
> @@ -62,7 +61,6 @@ config SPL_MXS_PMU_MINIMAL_VDD5V_CURRENT
>
> config SPL_MXS_PMU_DISABLE_BATT_CHARGE
> bool "Disable Battery Charging in MX28 PMU"
> - default n
>
> config SPL_MXS_PMU_ENABLE_4P2_LINEAR_REGULATOR
> bool "Enable the 4P2 linear regulator in MX28 PMU"
> diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
> index c43c185c17c5..a6c69c300d00 100644
> --- a/arch/arm/mach-rockchip/Kconfig
> +++ b/arch/arm/mach-rockchip/Kconfig
> @@ -450,7 +450,6 @@ config ROCKCHIP_BOOT_MODE_REG
> config ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON
> bool "Disable device boot on power plug-in"
> depends on PMIC_RK8XX
> - default n
> ---help---
> Say Y here to prevent the device from booting up because of a plug-in
> event. When set, the device will boot briefly to determine why it was
> diff --git a/arch/arm/mach-snapdragon/Kconfig b/arch/arm/mach-snapdragon/Kconfig
> index 0e073045be54..2fc1521e2d30 100644
> --- a/arch/arm/mach-snapdragon/Kconfig
> +++ b/arch/arm/mach-snapdragon/Kconfig
> @@ -14,7 +14,6 @@ config SPL_SYS_MALLOC_F_LEN
>
> config SDM845
> bool "Qualcomm Snapdragon 845 SoC"
> - default n
> select LINUX_KERNEL_IMAGE_HEADER
>
> config LNX_KRNL_IMG_TEXT_OFFSET_BASE
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index 40ca7d7b3a99..a10e4c06b6a3 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -811,7 +811,6 @@ config AXP_GPIO
> config AXP_DISABLE_BOOT_ON_POWERON
> bool "Disable device boot on power plug-in"
> depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
> - default n
> ---help---
> Say Y here to prevent the device from booting up because of a plug-in
> event. When set, the device will boot into the SPL briefly to
> diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
> index 464bd0798f62..0e94b84fe657 100644
> --- a/arch/arm/mach-tegra/Kconfig
> +++ b/arch/arm/mach-tegra/Kconfig
> @@ -18,7 +18,6 @@ config TEGRA_CLKRST
> config TEGRA_CRYPTO
> bool "Tegra AES128 crypto module"
> select AES
> - default n
>
> config TEGRA_GP_PADCTRL
> bool
> diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
> index 587edd50d7e8..b288c65e7fd1 100644
> --- a/arch/m68k/Kconfig
> +++ b/arch/m68k/Kconfig
> @@ -200,7 +200,6 @@ source "board/sysam/stmark2/Kconfig"
>
> config M68K_QEMU
> bool "Build with workarounds for incomplete QEMU emulation"
> - default n
> help
> QEMU 8.x currently does not implement RAMBAR accesses and
> DMA timers. Enable this option for U-Boot CI purposes only
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index e291456530bd..8fc81fb284cd 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -68,7 +68,6 @@ config SPL_SYS_DCACHE_OFF
> config SPL_ZERO_MEM_BEFORE_USE
> bool "Zero memory before use"
> depends on SPL
> - default n
> help
> Zero stack/GD/malloc area in SPL before using them, this is needed for
> Sifive core devices that uses L2 cache to store SPL.
> diff --git a/board/asus/grouper/Kconfig b/board/asus/grouper/Kconfig
> index 912c6c5fbae8..47d9bae94682 100644
> --- a/board/asus/grouper/Kconfig
> +++ b/board/asus/grouper/Kconfig
> @@ -12,11 +12,9 @@ config SYS_CONFIG_NAME
> config GROUPER_TPS65911
> bool "Enable support TI TPS65911 PMIC"
> select CMD_POWEROFF
> - default n
>
> config GROUPER_MAX77663
> bool "Enable support MAXIM MAX77663 PMIC"
> select CMD_POWEROFF
> - default n
>
> endif
> diff --git a/board/asus/transformer-t30/Kconfig b/board/asus/transformer-t30/Kconfig
> index 3c36f4ada206..accc999c435c 100644
> --- a/board/asus/transformer-t30/Kconfig
> +++ b/board/asus/transformer-t30/Kconfig
> @@ -14,7 +14,6 @@ config TRANSFORMER_SPI_BOOT
> select TEGRA20_SLINK
> select DM_SPI_FLASH
> select SPI_FLASH_WINBOND
> - default n
> help
> Tegra 3 based Transformers with Windows RT have core
> boot sequence (BCT and EBT) on separate SPI FLASH
> diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig
> index c6576aa6523a..f7e9b74f5782 100644
> --- a/board/keymile/Kconfig
> +++ b/board/keymile/Kconfig
> @@ -125,7 +125,6 @@ config SYS_IVM_EEPROM_PAGE_LEN
> config PG_WCOM_UBOOT_UPDATE_SUPPORTED
> bool "Enable U-Boot Field Fail-Safe Update Functionality"
> select EVENT
> - default n
> help
> Indicates that field fail-safe u-boot update is supported.
> This functionality works only for designs that are booting
> @@ -133,7 +132,6 @@ config PG_WCOM_UBOOT_UPDATE_SUPPORTED
>
> config PG_WCOM_UBOOT_BOOTPACKAGE
> bool "U-Boot Is Part Of Factory Boot-Package Image"
> - default n
> help
> Indicates that u-boot will be a part of the factory programmed
> boot-package image.
> @@ -149,7 +147,6 @@ config PG_WCOM_UBOOT_UPDATE_TEXT_BASE
>
> config PG_WCOM_UBOOT_UPDATE
> bool "U-Boot Is Part Of Factory Boot-Package Image"
> - default n
> help
> Indicates that u-boot will be a part of the embedded software and
> programmed at field.
> diff --git a/board/lg/x3-t30/Kconfig b/board/lg/x3-t30/Kconfig
> index 20ea4f5f3243..53d776019d65 100644
> --- a/board/lg/x3-t30/Kconfig
> +++ b/board/lg/x3-t30/Kconfig
> @@ -11,14 +11,12 @@ config SYS_CONFIG_NAME
>
> config DEVICE_P880
> bool "Enable support for LG Optimus 4X HD"
> - default n
> help
> LG Optimus 4X HD derives from x3 board but has slight
> differences.
>
> config DEVICE_P895
> bool "Enable support for LG Optimus Vu"
> - default n
> help
> LG Optimus Vu derives from x3 board but has slight
> differences.
> diff --git a/cmd/Kconfig b/cmd/Kconfig
> index 205df2f1fb65..60aed2c307ca 100644
> --- a/cmd/Kconfig
> +++ b/cmd/Kconfig
> @@ -246,7 +246,6 @@ config CMD_BOOTM_PRE_LOAD
> bool "enable pre-load on bootm"
> depends on CMD_BOOTM
> depends on IMAGE_PRE_LOAD
> - default n
> help
> Enable support of stage pre-load for the bootm command.
> This stage allow to check or modify the image provided
> @@ -2360,7 +2359,6 @@ config CMD_VIDCONSOLE
> config CMD_SELECT_FONT
> bool "select font size"
> depends on VIDEO
> - default n
> help
> Enabling this will provide 'font' command.
> Allows font selection at runtime.
> @@ -2880,7 +2878,6 @@ config CMD_UBIFS
> config MMC_SPEED_MODE_SET
> bool "set speed mode using mmc command"
> depends on CMD_MMC
> - default n
> help
> Enable setting speed mode using mmc rescan and mmc dev commands.
> The speed mode is provided as the last argument in these commands
> diff --git a/drivers/crypto/fsl/Kconfig b/drivers/crypto/fsl/Kconfig
> index 91a51cc5fe77..eaad19633f1d 100644
> --- a/drivers/crypto/fsl/Kconfig
> +++ b/drivers/crypto/fsl/Kconfig
> @@ -77,7 +77,6 @@ endif
> config FSL_DCP_RNG
> bool "Enable Random Number Generator support"
> depends on DM_RNG
> - default n
> help
> Enable support for the hardware based random number generator
> module of the DCP. It uses the True Random Number Generator (TRNG)
> diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
> index 22cb9d637c5e..d10edd277467 100644
> --- a/drivers/memory/Kconfig
> +++ b/drivers/memory/Kconfig
> @@ -61,7 +61,6 @@ config TI_GPMC
> if TI_GPMC
> config TI_GPMC_DEBUG
> bool "Debug Texas Instruments GPMC timings"
> - default n
> help
> Enable this to print GPMC timings before and after the GPMC registers
> are programmed. This should not be left enabled on production systems.
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index fccd9b89b81b..97057de8bf92 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -375,7 +375,6 @@ config SPL_MXC_OCOTP
> config NPCM_OTP
> bool "Nnvoton NPCM BMC On-Chip OTP Memory Support"
> depends on (ARM && ARCH_NPCM)
> - default n
> help
> Support NPCM BMC OTP memory (fuse).
> To compile this driver as a module, choose M here: the module
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index 72547f00fbec..a13e6f59cbd2 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -614,7 +614,6 @@ config ROCKCHIP_NAND
> config ROCKCHIP_NAND_SKIP_BBTSCAN
> bool "Skip the automatic BBT scan with Rockchip NAND controllers"
> depends on ROCKCHIP_NAND
> - default n
> help
> Skip the automatic BBT scan with the NAND_SKIP_BBTSCAN
> option when data content is not in MTD format or
> diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
> index a9617c6c58c1..76c424d75e9e 100644
> --- a/drivers/mtd/spi/Kconfig
> +++ b/drivers/mtd/spi/Kconfig
> @@ -107,7 +107,6 @@ config SPI_FLASH_SMART_HWCAPS
>
> config SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT
> bool "Command extension type is INVERT for Software Reset on boot"
> - default n
> help
> Because of SFDP information can not be get before boot.
> So define command extension type is INVERT when Software Reset on boot only.
> diff --git a/drivers/sm/Kconfig b/drivers/sm/Kconfig
> index f0987275d265..926af2863308 100644
> --- a/drivers/sm/Kconfig
> +++ b/drivers/sm/Kconfig
> @@ -4,6 +4,5 @@ config SM
> config MESON_SM
> bool "Amlogic Secure Monitor driver"
> select SM
> - default n
> help
> Say y here to enable the Amlogic secure monitor driver.
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 854b8b88daff..d1867c28758a 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -451,7 +451,6 @@ config SANDBOX_SPI_MAX_CS
> config SPI_ASPEED_SMC
> bool "ASPEED SPI flash controller driver"
> depends on DM_SPI && SPI_MEM
> - default n
> help
> Enable ASPEED SPI flash controller driver for AST2500
> and AST2600 SoCs.
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 1a883babf4c2..b501ea514bca 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -231,7 +231,6 @@ config USB_EHCI_MXS
> config USB_EHCI_NPCM
> bool "Support for Nuvoton NPCM on-chip EHCI USB controller"
> depends on ARCH_NPCM
> - default n
> ---help---
> Enables support for the on-chip EHCI controller on
> Nuvoton NPCM chips.
> @@ -368,7 +367,6 @@ config USB_OHCI_DA8XX
> config USB_OHCI_NPCM
> bool "Support for Nuvoton NPCM on-chip OHCI USB controller"
> depends on ARCH_NPCM
> - default n
> ---help---
> Enables support for the on-chip OHCI controller on
> Nuvoton NPCM chips.
> diff --git a/fs/ubifs/Kconfig b/fs/ubifs/Kconfig
> index 949b28841194..690e77ef8dcf 100644
> --- a/fs/ubifs/Kconfig
> +++ b/fs/ubifs/Kconfig
> @@ -8,7 +8,6 @@ config UBIFS_SILENCE_MSG
> config UBIFS_SILENCE_DEBUG_DUMP
> bool "UBIFS silence debug dumps"
> default y if UBIFS_SILENCE_MSG
> - default n
> help
> Make the debug dumps from UBIFS stop printing.
> This decreases size of U-Boot binary.
> --
> 2.36.1
>
Hello Michal!
I ran tests for all Tegra boards and checked specifically grouper,
tf_t30 and lg_x3.
So far no issues. Thanks
Reviewed-by: Svyatoslav Ryhel <clamor95 at gmail.com> # tegra
More information about the U-Boot
mailing list