[PATCH v3 2/6] arm: mach-k3: j721s2: Add mcu_timer0 id to the dev list

[Manorit Chawdhry]

mcu_timer0 is used by u-boot as the tick-timer. Add it to the soc
devices lsit so it an be enabled via the k3 power controller.

Reviewed-by: Neha Malcom Francis <n-francis at ti.com>
Reviewed-by: Nishanth Menon <nm at ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry at ti.com>
---
 arch/arm/mach-k3/j721s2/dev-data.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-k3/j721s2/dev-data.c b/arch/arm/mach-k3/j721s2/dev-data.c
index 8c999a3c5a8b..df70c5e5d7c0 100644
--- a/arch/arm/mach-k3/j721s2/dev-data.c
+++ b/arch/arm/mach-k3/j721s2/dev-data.c
@@ -47,6 +47,7 @@ static struct ti_lpsc soc_lpsc_list[] = {
 };
 
 static struct ti_dev soc_dev_list[] = {
+	PSC_DEV(35, &soc_lpsc_list[0]),
 	PSC_DEV(108, &soc_lpsc_list[0]),
 	PSC_DEV(109, &soc_lpsc_list[0]),
 	PSC_DEV(110, &soc_lpsc_list[0]),

-- 
2.41.0