September 2023 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Fri Sep 1 00:16:32 CEST 2023
Ending: Sat Sep 30 23:11:17 CEST 2023
Messages: 2795

• [[PATCH v2]] riscv: add backtrace support   Ben Dooks
• [ANN] U-Boot v2023.10-rc4 released   Tom Rini
• [BUG] issues with new bootflow, uefi and virtio   Simon Glass
• [BUG] sandbox_defconfig u-boot -T crashes   Heinrich Schuchardt
• [BUG] sandbox_defconfig u-boot -T crashes   Simon Glass
• [GIT PULL] xilinx patches for v2024.01-rc1 v2   Michal Simek
• [GIT PULL] xilinx patches for v2024.01-rc1 v2   Tom Rini
• [MASTER] Pull request doc-2023-10-rc4-2   Heinrich Schuchardt
• [MASTER] Pull request doc-2023-10-rc4-2   Tom Rini
• [NEW FEATURE] RFC: Add Intel GMBUS support   Eric Schikschneit
• [NEW FEATURE] RFC: Add Intel GMBUS support   Bin Meng
• [NEW FEATURE] RFC: Add Intel GMBUS support   Eric Schikschneit
• [NEXT] Pull request doc-next   Heinrich Schuchardt
• [NEXT] Pull request doc-next   Tom Rini
• [PATCH 0/2] arm64: ti: k3-j7: Add the ESM nodes   Keerthy
• [PATCH 0/2] arm64: ti: k3-j7: Add the ESM nodes   Nishanth Menon
• [PATCH 0/2] arm64: ti: k3-j7: Add the ESM nodes   Kumar, Udit
• [PATCH 0/2] arm: dts: k3-am625: Sync with kernel v6.6-rc1   Nishanth Menon
• [PATCH 0/2] arm: dts: k3-am64: Sync dts from Linux v6.6-rc1   Roger Quadros
• [PATCH 0/2] arm: dts: k3-am64: Sync dts from Linux v6.6-rc1   Nishanth Menon
• [PATCH 0/2] Conclusive KSTR-SAMA5D27 support   Artur Rojek
• [PATCH 0/2] make CONFIG_SPL_SYS_MALLOC_SIMPLE && CONFIG_SYS_SPL_MALLOC actually work   Rasmus Villemoes
• [PATCH 0/2] make CONFIG_SPL_SYS_MALLOC_SIMPLE && CONFIG_SYS_SPL_MALLOC actually work   Simon Glass
• [PATCH 0/2] make CONFIG_SPL_SYS_MALLOC_SIMPLE && CONFIG_SYS_SPL_MALLOC actually work   Rasmus Villemoes
• [PATCH 0/2] make CONFIG_SPL_SYS_MALLOC_SIMPLE && CONFIG_SYS_SPL_MALLOC actually work   Simon Glass
• [PATCH 0/2] Remove Pali Rohár from MAINTAINERS   Tom Rini
• [PATCH 0/2] riscv: starfive: generate u-boot-spl.bin.normal.out   Heinrich Schuchardt
• [PATCH 0/2] rockchip: Use an external TPL binary on RK3308   Massimo Pegorer
• [PATCH 0/2] serial: introduce CONFIG_CONSOLE_FLUSH_ON_NEWLINE   Rasmus Villemoes
• [PATCH 0/2] stdio: fix stdio_deregister_dev()   Heinrich Schuchardt
• [PATCH 0/2] thermal: Add VTM driver support for J72xx SOCs   Udit Kumar
• [PATCH 0/3] Add spi flash lock option   Venkatesh Yadav Abbarapu
• [PATCH 0/3] arm64: versal-net: Enable CMD_KASLR and TPM   Michal Simek
• [PATCH 0/3] ARM: dts: stm32f429 sync with Linux kernel 6.5   Dario Binacchi
• [PATCH 0/3] BOOTP/DHCPv4 enhancements   seanedmond at linux.microsoft.com
• [PATCH 0/3] BOOTP/DHCPv4 enhancements   Peter Robinson
• [PATCH 0/3] common: Remove a few more header files   Simon Glass
• [PATCH 0/3] common: Remove a few more header files   Tom Rini
• [PATCH 0/3] common: Remove a few more header files   Simon Glass
• [PATCH 0/3] common: Remove a few more header files   Tom Rini
• [PATCH 0/3] common: Remove a few more header files   Simon Glass
• [PATCH 0/3] common: Remove a few more header files   Tom Rini
• [PATCH 0/3] Do not setup boot_targets if driver is not enabled   Venkatesh Yadav Abbarapu
• [PATCH 0/3] Do not setup boot_targets if driver is not enabled   Michal Simek
• [PATCH 0/3] J7200 device tree sync from v6.5-rc1 to u-boot   Reid Tonking
• [PATCH 0/3] trace: Fix flyrecord alignment issue   Michal Simek
• [PATCH 0/4] Add AM62x LP SK support   Nitin Yadav
• [PATCH 0/4] Add AM62x LP SK support   Nishanth Menon
• [PATCH 0/4] Add AM62x LP SK support   Nitin Yadav
• [PATCH 0/4] Add support for sam9x60 curiosity   Durai Manickam KR
• [PATCH 0/4] Add support for sam9x60 curiosity   Alexander Dahl
• [PATCH 0/4] Add support for sam9x60 curiosity   Tom Rini
• [PATCH 0/4] Add support for sam9x60 curiosity   Durai.ManickamKR at microchip.com
• [PATCH 0/4] arm: dts: k3-am642: Sync with kernel v6.6-rc1   Nishanth Menon
• [PATCH 0/4] firmware: scmi: add SCMI power domain protocol support   AKASHI Takahiro
• [PATCH 0/4] mkimage: also honour -B even without external data   Rasmus Villemoes
• [PATCH 0/4] spl: atf: Fix potential bug on getting FIT data   Massimo Pegorer
• [PATCH 0/5] Add anti-rollback validation feature   seanedmond at linux.microsoft.com
• [PATCH 0/5] use .dtso for device tree overlay sources   Rasmus Villemoes
• [PATCH 0/5] xilinx: Sync DTs with Xilinx tree   Michal Simek
• [PATCH 0/5] xilinx: Sync DTs with Xilinx tree   Michal Simek
• [PATCH 0/6] Attempt to enforce standard extensions for build output   Simon Glass
• [PATCH 0/6] cmd mac: separate implementations   Heinrich Schuchardt
• [PATCH 0/6] phy: Fix use of generic_phy_valid() helper   Jonas Karlman
• [PATCH 0/7] riscv: spl: OpenSBI OS boot mode   Randolph
• [PATCH 0/8] Add some more EFI capsule tooling support   Sughosh Ganu
• [PATCH 0/8] Add some more EFI capsule tooling support   Tom Rini
• [PATCH 0/8] Add some more EFI capsule tooling support   Sughosh Ganu
• [PATCH 0/8] Add some more EFI capsule tooling support   Tom Rini
• [PATCH 00/10] ARM: dts: stm32f746 sync with Linux kernel 6.5   Dario Binacchi
• [PATCH 00/11] xilinx: add missing boards/SC descriptions   Michal Simek
• [PATCH 00/14] arm64: xilinx: Sync with Linux kernel   Michal Simek
• [PATCH 00/14] bloblist: Align to firmware handoff   Michal Simek
• [PATCH 00/15] blk: sandbox: Support binding a device with a given logical block size   Bin Meng
• [PATCH 00/15] blk: sandbox: Support binding a device with a given logical block size   Heinrich Schuchardt
• [PATCH 00/15] blk: sandbox: Support binding a device with a given logical block size   Bin Meng
• [PATCH 00/16] Add support for the Renesas RZ/G2L SMARC EVK   Paul Barker
• [PATCH 00/25] Tidy up use of CONFIG_CMDLINE   Simon Glass
• [PATCH 00/25] Tidy up use of CONFIG_CMDLINE   Tom Rini
• [PATCH 00/35] treewide: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 00/35] treewide: Remove unused NEEDS_MANUAL_RELOC code bits   Tom Rini
• [PATCH 00/35] treewide: Remove unused NEEDS_MANUAL_RELOC code bits   Simon Glass
• [PATCH 00/36] expo: Support editing lines of text   Simon Glass
• [PATCH 01/10] dt-bindings: mfd: stm32f7: Add binding definition for CAN3   Dario Binacchi
• [PATCH 01/10] dt-bindings: mfd: stm32f7: Add binding definition for CAN3   Patrice CHOTARD
• [PATCH 01/10] dt-bindings: mfd: stm32f7: Add binding definition for CAN3   Patrice CHOTARD
• [PATCH 01/11] arm64: zynqmp: Add support for KD240 Kria SOM CC   Michal Simek
• [PATCH 01/14] arm64: zynqmp: Describe interrupts by using macros   Michal Simek
• [PATCH 01/15] blk: Use a macro for the typical block size   Bin Meng
• [PATCH 01/16] serial: sh: Fix compile error when lacking HSCIF support   Paul Barker
• [PATCH 01/18] pinctrl: renesas: Rename R8A7795 H3 PFC tables file name to R8A77951   Marek Vasut
• [PATCH 01/19] ARM: dts: renesas: Synchronize R-Car R8A7790 H2 DTs with Linux 6.5.3   Marek Vasut
• [PATCH 01/20] clk: renesas: Synchronize R8A77951 H3 DT headers with Linux 6.5.3   Marek Vasut
• [PATCH 01/25] buildman: Use oldconfig when adjusting the config   Simon Glass
• [PATCH 01/35] boot: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 01/36] cli: Move simple readline into a function   Simon Glass
• [PATCH 02/10] ARM: dts: stm32: add pin map for CAN controller on stm32f7   Dario Binacchi
• [PATCH 02/10] ARM: dts: stm32: add pin map for CAN controller on stm32f7   Patrice CHOTARD
• [PATCH 02/10] ARM: dts: stm32: add pin map for CAN controller on stm32f7   Patrice CHOTARD
• [PATCH 02/11] arm64: zynqmp: Remove xlnx,fclk nodes   Michal Simek
• [PATCH 02/14] arm64: dts: xilinx: zynqmp: Add RPU subsystem device node   Michal Simek
• [PATCH 02/15] cmd: host: Mandate the filename parameter in the 'bind' command   Bin Meng
• [PATCH 02/16] dt-bindings: Add RZ/G2L CPG bindings   Paul Barker
• [PATCH 02/18] pinctrl: renesas: Rename RZ/A1 R7S72100 PFC tables to RZ/A1   Marek Vasut
• [PATCH 02/19] ARM: dts: renesas: Synchronize R-Car R8A7791 M2-W and R8A7793 M2-N DTs with Linux 6.5.3   Marek Vasut
• [PATCH 02/20] clk: renesas: Synchronize R8A779F0 S4 DT headers with Linux 6.5.3   Marek Vasut
• [PATCH 02/25] bootstd: Correct dependencies on CMDLINE   Simon Glass
• [PATCH 02/35] blkcache: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 02/36] cli: Add a command to show cmdline history   Simon Glass
• [PATCH 03/10] ARM: dts: stm32: add CAN support on stm32f746   Dario Binacchi
• [PATCH 03/10] ARM: dts: stm32: add CAN support on stm32f746   Patrice CHOTARD
• [PATCH 03/10] ARM: dts: stm32: add CAN support on stm32f746   Patrice CHOTARD
• [PATCH 03/11] arm64: zynqmp: Add support for vck190 revB system controller   Michal Simek
• [PATCH 03/14] arm64: xilinx: Remove address/size-cells from flash node   Michal Simek
• [PATCH 03/15] blk: sandbox: Support binding a device with a given logical block size   Bin Meng
• [PATCH 03/16] dt-bindings: Add RZ/G2L PFC bindings   Paul Barker
• [PATCH 03/18] pinctrl: renesas: Drop R8A77950 H3 ES1.x PFC table entry   Marek Vasut
• [PATCH 03/19] ARM: dts: renesas: Synchronize R-Car R8A7794 E2 DTs with Linux 6.5.3   Marek Vasut
• [PATCH 03/20] clk: renesas: Synchronize R8A7790 H2 clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 03/25] autoboot: Correct dependencies on CMDLINE   Simon Glass
• [PATCH 03/25] autoboot: Correct dependencies on CMDLINE   Tom Rini
• [PATCH 03/35] command: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 03/36] cli: Drop some #ifdefs in cli_readline   Simon Glass
• [PATCH 04/10] ARM: dts: stm32: use RCC macro for CRC node on stm32f746   Dario Binacchi
• [PATCH 04/10] ARM: dts: stm32: use RCC macro for CRC node on stm32f746   Patrice CHOTARD
• [PATCH 04/10] ARM: dts: stm32: use RCC macro for CRC node on stm32f746   Patrice CHOTARD
• [PATCH 04/11] arm64: zynqmp: Add x-prc-01/02/03/04/05 revA support from SC   Michal Simek
• [PATCH 04/14] arm64: xilinx: Use lower case for partition address   Michal Simek
• [PATCH 04/15] blk: host_dev: Make host_sb_detach_file() and host_sb_ops static   Bin Meng
• [PATCH 04/16] dt-bindings: Add RZ/G2L IRQC bindings   Paul Barker
• [PATCH 04/18] pinctrl: renesas: Add support for 1.8V/2.5V I/O voltage levels   Marek Vasut
• [PATCH 04/19] ARM: dts: renesas: Synchronize R-Car R8A77951 H3 DTs with Linux 6.5.3   Marek Vasut
• [PATCH 04/20] clk: renesas: Synchronize R8A7791 M2-W and R8A7793 M2-N clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 04/25] cmd: Add a few more dependencies on CMDLINE   Simon Glass
• [PATCH 04/35] common: board_r: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 04/36] cli: Drop #ifdefs for CONFIG_AUTO_COMPLETE in cli_readline   Simon Glass
• [PATCH 05/10] ARM: dts: stm32: add pin map for i2c3 controller on stm32f7   Dario Binacchi
• [PATCH 05/10] ARM: dts: stm32: add pin map for i2c3 controller on stm32f7   Patrice CHOTARD
• [PATCH 05/10] ARM: dts: stm32: add pin map for i2c3 controller on stm32f7   Patrice CHOTARD
• [PATCH 05/11] arm64: zynqmp: Add support for vpk120-revA   Michal Simek
• [PATCH 05/14] arm64: zynqmp: Describe bus-width for SD card on KV260   Michal Simek
• [PATCH 05/15] blk: host_dev: Sanity check on the size of host backing file   Bin Meng
• [PATCH 05/16] arm: rmobile: Add basic RZ/G2L family support   Paul Barker
• [PATCH 05/18] pinctrl: renesas: Synchronize R8A7790 H2 PFC tables with Linux 6.5.3   Marek Vasut
• [PATCH 05/19] ARM: dts: renesas: Synchronize R-Car R8A77960 M3-W and R8A77961 M3-W+ DTs with Linux 6.5.3   Marek Vasut
• [PATCH 05/20] clk: renesas: Synchronize R8A7792 V2H clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 05/25] treewide: Correct use of long help   Simon Glass
• [PATCH 05/25] treewide: Correct use of long help   Tom Rini
• [PATCH 05/32] spl: mx6: powerpc: Drop the condition on timer_init()   Simon Glass
• [PATCH 05/32] spl: mx6: powerpc: Drop the condition on timer_init()   Simon Glass
• [PATCH 05/32] spl: mx6: powerpc: Drop the condition on timer_init()   Christophe Leroy
• [PATCH 05/35] common: hush: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 05/36] cli: Implement delete-word in cread_line()   Simon Glass
• [PATCH 06/10] ARM: dts: stm32: add touchscreen on stm32f746-disco board   Dario Binacchi
• [PATCH 06/10] ARM: dts: stm32: add touchscreen on stm32f746-disco board   Patrice CHOTARD
• [PATCH 06/10] ARM: dts: stm32: add touchscreen on stm32f746-disco board   Patrice CHOTARD
• [PATCH 06/11] arm64: zynqmp: Create description for generic SC (vpk120-revB)   Michal Simek
• [PATCH 06/14] arm64: zynqmp: Fix Siva's email address format   Michal Simek
• [PATCH 06/15] cmd: host: Print out the block size of the host device   Bin Meng
• [PATCH 06/16] arm: rmobile: Add basic R9A07G044L SoC support   Paul Barker
• [PATCH 06/18] pinctrl: renesas: Synchronize R8A7791 M2-W and R8A7793 M2-N PFC tables with Linux 6.5.3   Marek Vasut
• [PATCH 06/19] ARM: dts: renesas: Synchronize R-Car R8A77965 M3-N DTs with Linux 6.5.3   Marek Vasut
• [PATCH 06/20] clk: renesas: Synchronize R8A7794 E2 clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 06/25] test: Make UNIT_TEST depend on CMDLINE   Simon Glass
• [PATCH 06/35] common: malloc: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 06/36] cli: Use unsigned int instead of unsigned long   Simon Glass
• [PATCH 07/10] ARM: dts: stm32: add ltdc support on stm32f746 MCU   Dario Binacchi
• [PATCH 07/10] ARM: dts: stm32: add ltdc support on stm32f746 MCU   Patrice CHOTARD
• [PATCH 07/10] ARM: dts: stm32: add ltdc support on stm32f746 MCU   Patrice CHOTARD
• [PATCH 07/11] arm64: zynqmp: Add support for SC revC   Michal Simek
• [PATCH 07/14] arm64: xilinx: Put ethernet phys to mdio node   Michal Simek
• [PATCH 07/15] blk: blkmap: Make bind/unbind routines static   Bin Meng
• [PATCH 07/16] clk: renesas: Add RZ/G2L CPG driver   Paul Barker
• [PATCH 07/18] pinctrl: renesas: Synchronize R8A7792 V2H PFC tables with Linux 6.5.3   Marek Vasut
• [PATCH 07/19] ARM: dts: renesas: Synchronize R-Car R8A77970 V3M DTs with Linux 6.5.3   Marek Vasut
• [PATCH 07/20] clk: renesas: Synchronize R8A77951 H3 clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 07/25] tegra: Change #ifdef for nop   Simon Glass
• [PATCH 07/25] tegra: Change #ifdef for nop   Tom Rini
• [PATCH 07/35] common: event: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 07/36] cli: Convert cread_line() to use a struct for the main vars   Simon Glass
• [PATCH 08/10] ARM: dts: stm32: add pin map for LTDC on stm32f7   Dario Binacchi
• [PATCH 08/10] ARM: dts: stm32: add pin map for LTDC on stm32f7   Patrice CHOTARD
• [PATCH 08/10] ARM: dts: stm32: add pin map for LTDC on stm32f7   Patrice CHOTARD
• [PATCH 08/11] arm64: zynqmp: Describe i2c structures for SCs   Michal Simek
• [PATCH 08/14] arm64: xilinx: Remove address/size-cells from gem nodes   Michal Simek
• [PATCH 08/15] cmd: blkmap: Make map_handlers[] and its .fn static   Bin Meng
• [PATCH 08/16] arm: rmobile: Restrict PINCTRL_PFC selection to R-Car gen3/gen4   Paul Barker
• [PATCH 08/18] pinctrl: renesas: Synchronize R8A7794 E2 PFC tables with Linux 6.5.3   Marek Vasut
• [PATCH 08/19] ARM: dts: renesas: Synchronize R-Car R8A77980 V3H DTs with Linux 6.5.3   Marek Vasut
• [PATCH 08/19] boot: Move fdt_support to boot/   Simon Glass
• [PATCH 08/20] clk: renesas: Synchronize R8A77960 M3-W and R8A77961 M3-W+ clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 08/25] fastboot: Avoid depending on CMDLINE   Simon Glass
• [PATCH 08/25] fastboot: Avoid depending on CMDLINE   Tom Rini
• [PATCH 08/35] common: hash: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 08/36] cli: Unindent some code in cread_line()   Simon Glass
• [PATCH 09/10] ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco   Dario Binacchi
• [PATCH 09/10] ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco   Patrice CHOTARD
• [PATCH 09/10] ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco   Patrice CHOTARD
• [PATCH 09/11] arm64: zynqmp: Add support for VPXA2785   Michal Simek
• [PATCH 09/14] arm64: dts: zynqmp: zcu106a: Describe DisplayPort connector   Michal Simek
• [PATCH 09/15] blk: blkmap: Support mapping to device of any block size   Bin Meng
• [PATCH 09/15] blk: blkmap: Support mapping to device of any block size   Tobias Waldekranz
• [PATCH 09/15] blk: blkmap: Support mapping to device of any block size   Bin Meng
• [PATCH 09/16] pinctrl: renesas: Add RZ/G2L PFC driver   Paul Barker
• [PATCH 09/18] pinctrl: renesas: Synchronize R8A77951 H3 PFC tables with Linux 6.5.3   Marek Vasut
• [PATCH 09/19] ARM: dts: renesas: Synchronize R-Car R8A77990 E3 DTs with Linux 6.5.3   Marek Vasut
• [PATCH 09/20] clk: renesas: Synchronize R8A77965 M3-N clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 09/25] cli: Always build cli_getch   Simon Glass
• [PATCH 09/32] spl: Avoid an #ifdef when printing gd->malloc_ptr   Simon Glass
• [PATCH 09/32] spl: Avoid an #ifdef when printing gd->malloc_ptr   Tom Rini
• [PATCH 09/32] spl: Avoid an #ifdef when printing gd->malloc_ptr   Simon Glass
• [PATCH 09/32] spl: Avoid an #ifdef when printing gd->malloc_ptr   Tom Rini
• [PATCH 09/32] spl: Avoid an #ifdef when printing gd->malloc_ptr   Simon Glass
• [PATCH 09/35] common: stdio: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 09/36] cli: Create a function to process characters   Simon Glass
• [PATCH 1/1] binman: doc: Remove incomplete sentence   Heinrich Schuchardt
• [PATCH 1/1] binman: doc: Remove incomplete sentence   Simon Glass
• [PATCH 1/1] binman: doc: Remove incomplete sentence   Massimo Pegorer
• [PATCH 1/1] cmd/exception: support RISC-V compressed instruction   Heinrich Schuchardt
• [PATCH 1/1] cmd/exception: support RISC-V compressed instruction   Leo Liang
• [PATCH 1/1] cmd/exception: test RISC-V 16 bit aligned instruction   Heinrich Schuchardt
• [PATCH 1/1] cmd/exception: test RISC-V 16 bit aligned instruction   Leo Liang
• [PATCH 1/1] configs: NVMe/USB target boot devices on VisionFive 2   Heinrich Schuchardt
• [PATCH 1/1] configs: NVMe/USB target boot devices on VisionFive 2   Leo Liang
• [PATCH 1/1] efi_selftest: BitBlt test   Heinrich Schuchardt
• [PATCH 1/1] efi_selftest: BitBlt test   Ilias Apalodimas
• [PATCH 1/1] net: axi_emac: Convert to ofnode functions   Michal Simek
• [PATCH 1/1] net: sni_netsec: Add workaround for timeout error   Tom Rini
• [PATCH 1/1] riscv: enable CONFIG_DEBUG_UART by default   Heinrich Schuchardt
• [PATCH 1/1] riscv: enable CONFIG_DEBUG_UART by default   Leo Liang
• [PATCH 1/1] riscv: enable CONFIG_DEBUG_UART by default   Leo Liang
• [PATCH 1/1] riscv: enable CONFIG_DEBUG_UART by default   Heinrich Schuchardt
• [PATCH 1/1] riscv: enable CONFIG_DEBUG_UART by default   Leo Liang
• [PATCH 1/1] riscv: remove dram_init_banksize()   Heinrich Schuchardt
• [PATCH 1/1] riscv: remove dram_init_banksize()   Wu, Fei
• [PATCH 1/1] riscv: set fdtfile on VisionFive 2   Heinrich Schuchardt
• [PATCH 1/1] riscv: set fdtfile on VisionFive 2   Leo Liang
• [PATCH 1/1] riscv: set fdtfile on VisionFive 2   Milan P. Stanić
• [PATCH 1/1] riscv: set fdtfile on VisionFive 2   Shengyu Qu
• [PATCH 1/1] riscv: set fdtfile on VisionFive 2   Leo Liang
• [PATCH 1/1] spl: undefined return value in spl_blk_load_image   Heinrich Schuchardt
• [PATCH 1/1] spl: undefined return value in spl_blk_load_image   Xavier Drudis Ferran
• [PATCH 1/1] starfive: visionfive2: add mmc0 and nvme boot targets   Milan P. Stanić
• [PATCH 1/1] starfive: visionfive2: add mmc0 and nvme boot targets   Leo Liang
• [PATCH 1/1] starfive: visionfive2: add mmc0 and nvme boot targets   Simon Glass
• [PATCH 1/1] starfive: visionfive2: add mmc0 and nvme boot targets   Leo Liang
• [PATCH 1/1] test: build dependency for event unit tests   Heinrich Schuchardt
• [PATCH 1/1] test: build dependency for event unit tests   Simon Glass
• [PATCH 1/1] timer: document the unit of the timer rate   Heinrich Schuchardt
• [PATCH 1/1] timer: document the unit of the timer rate   Simon Glass
• [PATCH 1/1] Watchdog: Support WDIOF_CARDRESET on TI AM65x platform   Tom Rini
• [PATCH 1/2] Allow Python packages to be dropped   Bin Meng
• [PATCH 1/2] arm64: dts: ti: k3-j721s2: Add ESM instances   Keerthy
• [PATCH 1/2] arm: dts: k3-pinctrl: Sync with kernel v6.6-rc1   Nishanth Menon
• [PATCH 1/2] arm: dts: k3-pinctrl: Sync with kernel v6.6-rc1   Dhruva Gole
• [PATCH 1/2] arm: dts: k3-pinctrl: Sync with kernel v6.6-rc1   Mattijs Korpershoek
• [PATCH 1/2] arm: dts: k3-pinctrl: Sync with kernel v6.6-rc1   Tom Rini
• [PATCH 1/2] arm: dts: rockchip: rk3588, rk3588s: sync with Linux   FUKAUMI Naoki
• [PATCH 1/2] ARM: imx: Use default SAVED_DRAM_TIMING_BASE on Data Modul i.MX8M Mini eDM SBC   sbabic at denx.de
• [PATCH 1/2] cache: sifive: clear out the error irqs on init   Ben Dooks
• [PATCH 1/2] cache: sifive: clear out the error irqs on init   Ben Dooks
• [PATCH 1/2] common: add prototype for populate_serial_number()   Artur Rojek
• [PATCH 1/2] common: add prototype for populate_serial_number()   Simon Glass
• [PATCH 1/2] common: add prototype for populate_serial_number()   Artur Rojek
• [PATCH 1/2] configs: am65x: Merge the HS and non-HS defconfigs   Manorit Chawdhry
• [PATCH 1/2] configs: rockchip: add DOS_PARTITION to rock-pi-s defconfig   Massimo Pegorer
• [PATCH 1/2] configs: rockchip: rk3308: use CONFIG_DEFAULT_FDT_FILE   FUKAUMI Naoki
• [PATCH 1/2] dm: core: Correct references to DM_SPL   Simon Glass
• [PATCH 1/2] dm: serial: fix serial_post_probe()   Heinrich Schuchardt
• [PATCH 1/2] image-host: add a check of the return value of snprintf.   Hugo Cornelis
• [PATCH 1/2] MAINTAINERS: Drop Pali Rohár   Tom Rini
• [PATCH 1/2] MAINTAINERS: Drop Pali Rohár   Tom Rini
• [PATCH 1/2] ram: stm32mp1: Only print RAM config with CONFIG_SPL_DISPLAY_PRINT   Harald Seiler
• [PATCH 1/2] Revert "ARM: dts: k3-am642-sk-u-boot: add PMIC node"   Roger Quadros
• [PATCH 1/2] risc-v: implement DBCN write byte   Leo Liang
• [PATCH 1/2] riscv: allow riscv timer to be instantiated via device tree   Leo Liang
• [PATCH 1/2] riscv: cpu: Rename EVENT_SPY to EVENT_SPY_SIMPLE   Marek Vasut
• [PATCH 1/2] riscv: cpu: Rename EVENT_SPY to EVENT_SPY_SIMPLE   Simon Glass
• [PATCH 1/2] riscv: Rework riscv_cpu_probe for current event macros   Tom Rini
• [PATCH 1/2] riscv: Rework riscv_cpu_probe for current event macros   Leo Liang
• [PATCH 1/2] riscv: Rework riscv_cpu_probe for current event macros   Heinrich Schuchardt
• [PATCH 1/2] riscv: Rework riscv_cpu_probe for current event macros   Leo Liang
• [PATCH 1/2] riscv: Rework riscv_cpu_probe for current event macros   Milan P. Stanić
• [PATCH 1/2] riscv: Rework riscv_cpu_probe for current event macros   Tom Rini
• [PATCH 1/2] rockchip: rk3568-nanopi-r5: Update defconfig for NanoPi R5C and R5S   Kever Yang
• [PATCH 1/2] rockchip: Use an external TPL binary on RK3308   Massimo Pegorer
• [PATCH 1/2] rockchip: Use an external TPL binary on RK3308   Massimo Pegorer
• [PATCH 1/2] rockchip: Use an external TPL binary on RK3308   Kever Yang
• [PATCH 1/2] serial: serial-uclass.c: move definition of _serial_flush up a bit   Rasmus Villemoes
• [PATCH 1/2] serial: serial-uclass.c: move definition of _serial_flush up a bit   Simon Glass
• [PATCH 1/2] spl: make SYS_SPL_MALLOC depend on !(SPL_STACK_R && SPL_SYS_MALLOC_SIMPLE)   Rasmus Villemoes
• [PATCH 1/2] spl: make SYS_SPL_MALLOC depend on !(SPL_STACK_R && SPL_SYS_MALLOC_SIMPLE)   Tom Rini
• [PATCH 1/2] spl: make SYS_SPL_MALLOC depend on !(SPL_STACK_R && SPL_SYS_MALLOC_SIMPLE)   Simon Glass
• [PATCH 1/2] thermal: k3-j72xx-bandgap: Add support for vtm   Udit Kumar
• [PATCH 1/2] thermal: k3-j72xx-bandgap: Add support for vtm   Nishanth Menon
• [PATCH 1/2] thermal: k3-j72xx-bandgap: Add support for vtm   Kumar, Udit
• [PATCH 1/2] thermal: k3-j72xx-bandgap: Add support for vtm   Nishanth Menon
• [PATCH 1/2] thermal: k3-j72xx-bandgap: Add support for vtm   Kumar, Udit
• [PATCH 1/2] thermal: k3-j72xx-bandgap: Add support for vtm   Nishanth Menon
• [PATCH 1/2] thermal: k3-j72xx-bandgap: Add support for vtm   Kumar, Udit
• [PATCH 1/2] tools: mkimage: Add StarFive SPL image support   Heinrich Schuchardt
• [PATCH 1/2] tools: mkimage: Add StarFive SPL image support   Chanho Park
• [PATCH 1/2] tools: mkimage: Add StarFive SPL image support   Heinrich Schuchardt
• [PATCH 1/3] ARM: dts: stm32: add CAN support on stm32f429   Dario Binacchi
• [PATCH 1/3] ARM: dts: stm32: add CAN support on stm32f429   Patrice CHOTARD
• [PATCH 1/3] ARM: dts: stm32: add CAN support on stm32f429   Patrice CHOTARD
• [PATCH 1/3] arm: mvebu: Espressobin: move FDT fixup into a separate function   Robert Marko
• [PATCH 1/3] arm: mvebu: Espressobin: move FDT fixup into a separate function   Stefan Roese
• [PATCH 1/3] Azure: Rework test_py job to publish its wrapper script   Tom Rini
• [PATCH 1/3] Azure: Rework test_py job to publish its wrapper script   Simon Glass
• [PATCH 1/3] Azure: Rework test_py job to publish its wrapper script   Tom Rini
• [PATCH 1/3] configs: stm32f746-disco: limit resolution to 480x272   Patrice CHOTARD
• [PATCH 1/3] drivers: misc: k3_avs: Add Linux compatible to enable avs in u-boot   Reid Tonking
• [PATCH 1/3] drivers: misc: k3_avs: Add Linux compatible to enable avs in u-boot   Nishanth Menon
• [PATCH 1/3] drivers: misc: k3_avs: Add Linux compatible to enable avs in u-boot   reidt
• [PATCH 1/3] drivers: misc: k3_avs: Add Linux compatible to enable avs in u-boot   Kumar, Udit
• [PATCH 1/3] dt-bindings: mtd: fixed-partitions: Add binman compatible   Simon Glass
• [PATCH 1/3] Fix code style for time functions   Simon Glass
• [PATCH 1/3] Fix code style for time functions   Tom Rini
• [PATCH 1/3] imx: hab: Allow hab_auth_img_or_fail to be called without ivt_offset   Fabio Estevam
• [PATCH 1/3] imx: hab: Allow hab_auth_img_or_fail to be called without ivt_offset   sbabic at denx.de
• [PATCH 1/3] Makefile: Allow for board directories to not have a Makefile   Tom Rini
• [PATCH 1/3] mtd: spi-nor: Add spi flash lock config option   Venkatesh Yadav Abbarapu
• [PATCH 1/3] mtd: spi-nor: Add spi flash lock config option   Michal Simek
• [PATCH 1/3] net: Get pxe config file from dhcp option 209   seanedmond at linux.microsoft.com
• [PATCH 1/3] trace: Use 64bit variable for start and len   Michal Simek
• [PATCH 1/3] trace: Use 64bit variable for start and len   Simon Glass
• [PATCH 1/3] trace: Use 64bit variable for start and len   Michal Simek
• [PATCH 1/3] xilinx: versal-net: Do not setup boot_targets if driver is not enabled   Venkatesh Yadav Abbarapu
• [PATCH 1/3] xilinx: versal-net: Do not setup boot_targets if driver is not enabled   Simon Glass
• [PATCH 1/3] xilinx: versal-net: Do not setup boot_targets if driver is not enabled   Michal Simek
• [PATCH 1/4] arm: dts: Introduce k3-serdes.h from v6.6-rc1   Nishanth Menon
• [PATCH 1/4] arm: dts: Introduce k3-serdes.h from v6.6-rc1   Tom Rini
• [PATCH 1/4] arm: dts: Refactor common dtsi file for R5 and A53 SPL   Nitin Yadav
• [PATCH 1/4] arm: dts: Refactor common dtsi file for R5 and A53 SPL   Nishanth Menon
• [PATCH 1/4] arm: dts: Refactor common dtsi file for R5 and A53 SPL   Nitin Yadav
• [PATCH 1/4] arm: dts: Refactor common dtsi file for R5 and A53 SPL   Nishanth Menon
• [PATCH 1/4] configs: at91: sam9x60_curiosity: update sam9x60_curiosity_mmc_defconfig   Durai Manickam KR
• [PATCH 1/4] firmware: scmi: add power domain protocol support   AKASHI Takahiro
• [PATCH 1/4] mkimage: also honour -B even without external data   Rasmus Villemoes
• [PATCH 1/4] mkimage: also honour -B even without external data   Simon Glass
• [PATCH 1/4] mkimage: also honour -B even without external data   Rasmus Villemoes
• [PATCH 1/4] mkimage: also honour -B even without external data   Simon Glass
• [PATCH 1/4] mkimage: also honour -B even without external data   Rasmus Villemoes
• [PATCH 1/4] mkimage: also honour -B even without external data   Simon Glass
• [PATCH 1/4] mkimage: also honour -B even without external data   Rasmus Villemoes
• [PATCH 1/4] mkimage: also honour -B even without external data   Sean Anderson
• [PATCH 1/4] mkimage: also honour -B even without external data   Rasmus Villemoes
• [PATCH 1/4] mkimage: also honour -B even without external data   Sean Anderson
• [PATCH 1/4] spl: atf: Improve comments and code readability   Massimo Pegorer
• [PATCH 1/4] spl: atf: Improve comments and code readability   Simon Glass
• [PATCH 1/5] arm64: zynqmp: Rename xlnx, mio_bank to xlnx, mio-bank for DLC21   Michal Simek
• [PATCH 1/5] arm: dts: imx8mm-cl-iot-gate: rename overlay sources to .dtso   Rasmus Villemoes
• [PATCH 1/5] armv8: fsl-layerscape: make some functions static   Laurentiu Tudor
• [PATCH 1/5] core: fix doc comments of dev_read_addr*() and related functions   Matthias Schiffer
• [PATCH 1/5] spl: fit: Add board level function to decide application of DTO   Marek Vasut
• [PATCH 1/6] arm: dts: k3-am64-evm: Fix boot   Roger Quadros
• [PATCH 1/6] board: gateworks: venice: fix gw7904   sbabic at denx.de
• [PATCH 1/6] cmd: move mac command   Heinrich Schuchardt
• [PATCH 1/6] phy: Set phy->dev to NULL when generic_phy_get_by_name() fails   Jonas Karlman
• [PATCH 1/6] phy: Set phy->dev to NULL when generic_phy_get_by_name() fails   Tom Rini
• [PATCH 1/7] net: dwc_eth_qos: Drop unused rx_pkt from eqos_priv   Kever Yang
• [PATCH 1/7] riscv: dts: Introduce SPL_LOAD_FIT_CONFIG symbol   Randolph
• [PATCH 1/7] rng: stm32: rename STM32 RNG driver   Gatien Chevallier
• [PATCH 1/7] rng: stm32: rename STM32 RNG driver   Heinrich Schuchardt
• [PATCH 1/7] rng: stm32: rename STM32 RNG driver   Grzegorz Szymaszek
• [PATCH 1/7] rng: stm32: rename STM32 RNG driver   Patrick DELAUNAY
• [PATCH 1/7] rng: stm32: rename STM32 RNG driver   Gatien CHEVALLIER
• [PATCH 1/7] rng: stm32: rename STM32 RNG driver   Grzegorz Szymaszek
• [PATCH 1/8] drivers: rollback: Add rollback devices to driver model   seanedmond at linux.microsoft.com
• [PATCH 1/8] tools: mkeficapsule: Add support for parsing capsule params from config file   Sughosh Ganu
• [PATCH 1/8] tools: mkeficapsule: Add support for parsing capsule params from config file   Tom Rini
• [PATCH 1/8] tools: mkeficapsule: Add support for parsing capsule params from config file   Sughosh Ganu
• [PATCH 1/8] x86: broadwell: Show the memory delay   Bin Meng
• [PATCH 1/9] cmd: bdinfo: Optionally use getopt and implement bdinfo -a   Marek Vasut
• [PATCH 1/9] cmd: bdinfo: Optionally use getopt and implement bdinfo -a   Simon Glass
• [PATCH 10/10] ARM: dts: stm32: support display on stm32f746-disco board   Dario Binacchi
• [PATCH 10/10] ARM: dts: stm32: support display on stm32f746-disco board   Patrice CHOTARD
• [PATCH 10/10] ARM: dts: stm32: support display on stm32f746-disco board   Patrice CHOTARD
• [PATCH 10/11] arm64: zynqmp: Add support for zcu670-revA   Michal Simek
• [PATCH 10/14] arm64: dts: zynqmp: Add ports for the DisplayPort subsystem   Michal Simek
• [PATCH 10/15] cmd: blk_common: Use macros for the return values   Bin Meng
• [PATCH 10/16] serial: sh: Add RZ/G2L SCIF support   Paul Barker
• [PATCH 10/18] pinctrl: renesas: Synchronize R8A77960 M3-W and R8A77961 M3-W+ PFC tables with Linux 6.5.3   Marek Vasut
• [PATCH 10/19] ARM: dts: renesas: Synchronize R-Car R8A77995 D3 DTs with Linux 6.5.3   Marek Vasut
• [PATCH 10/20] clk: renesas: Synchronize R8A77970 V3M clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 10/25] cmd: Use an #ifdef around run_commandf()   Simon Glass
• [PATCH 10/35] cmd: bmp: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 10/36] cli: Terminate the string in cread_line_process_ch()   Simon Glass
• [PATCH 11/11] arm64: zynqmp: Add support for zcu670-revB   Michal Simek
• [PATCH 11/14] arm64: zynqmp: Convert kv260-revA overlay to ASCII text   Michal Simek
• [PATCH 11/15] dm: blk: Rename get_desc() and make it externally visible   Bin Meng
• [PATCH 11/16] mmc: renesas-sdhi: Initialize module on RZ/G2L   Paul Barker
• [PATCH 11/17] spl: sdp: Detach the controller on error   Marek Vasut
• [PATCH 11/18] pinctrl: renesas: Synchronize R8A77965 M3-N PFC tables with Linux 6.5.3   Marek Vasut
• [PATCH 11/19] ARM: dts: renesas: Synchronize R-Car R8A779A0 E3 DTs with Linux 6.5.3   Marek Vasut
• [PATCH 11/20] clk: renesas: Synchronize R8A77980 V3H clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 11/25] Move bootmenu_conv_key() into its own file   Simon Glass
• [PATCH 11/35] cmd: date: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 11/36] cli: Allow history to be disabled   Simon Glass
• [PATCH 12/14] arm64: zynqmp: Sync licenses with Linux kernel   Michal Simek
• [PATCH 12/15] cmd: blk_common: Stop using hard-coded block size for Sandbox operations   Bin Meng
• [PATCH 12/16] arm: rmobile: Include <asm/types.h> in header   Paul Barker
• [PATCH 12/18] pinctrl: renesas: Synchronize R8A77970 V3M PFC tables with Linux 6.5.3   Marek Vasut
• [PATCH 12/19] ARM: dts: renesas: Synchronize R-Car R8A779F0 S4 DTs with Linux 6.5.3   Marek Vasut
• [PATCH 12/20] clk: renesas: Synchronize R8A77990 E3 clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 12/25] armffa: Correct command help condition   Simon Glass
• [PATCH 12/35] cmd: i2c: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 12/36] cli: Allow command completion to be disabled   Simon Glass
• [PATCH 13/14] ARM: zynq: Describe nand device in DT   Michal Simek
• [PATCH 13/15] dm: blk: Drop blk_{read,write}_devnum()   Bin Meng
• [PATCH 13/16] arm: rmobile: Add CPU detection for RZ/G2L   Paul Barker
• [PATCH 13/18] pinctrl: renesas: Synchronize R8A77980 V3H PFC tables with Linux 6.5.3   Marek Vasut
• [PATCH 13/19] ARM: dts: renesas: Synchronize R-Car R8A779G0 V4H DTs with Linux 6.5.3   Marek Vasut
• [PATCH 13/20] clk: renesas: Synchronize R8A77995 D3 clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 13/25] pxe: Depend on CMDLINE   Simon Glass
• [PATCH 13/35] cmd: nvedit: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 13/36] cli: Add a function to set up a new cread   Simon Glass
• [PATCH 14/14] arm64: zynqmp: Aligned QSPI configuration with latest spec   Michal Simek
• [PATCH 14/15] disk: part: Print out the unknown device uclass id   Bin Meng
• [PATCH 14/16] arm: rmobile: Support RZ/G2L memory map   Paul Barker
• [PATCH 14/18] pinctrl: renesas: Synchronize R8A77990 E3 PFC tables with Linux 6.5.3   Marek Vasut
• [PATCH 14/19] ARM: dts: renesas: Synchronize RZ R7S72100 RZ/A1 DTs with Linux 6.5.3   Marek Vasut
• [PATCH 14/20] clk: renesas: Synchronize R8A779A0 V3U clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 14/25] env: Split out non-command code into a new file   Simon Glass
• [PATCH 14/35] cmd: onenand: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 14/36] video: Allow obtaining the nominal size of a string size   Simon Glass
• [PATCH 15/15] disk: part: Handle blkmap device in print_part_header()   Bin Meng
• [PATCH 15/16] arm: dts: Import RZ/G2L SMARC EVK device tree   Paul Barker
• [PATCH 15/18] pinctrl: renesas: Synchronize R8A77995 D3 PFC tables with Linux 6.5.3   Marek Vasut
• [PATCH 15/19] ARM: dts: renesas: Synchronize RZ R8A774A1 RZ/G2M DTs with Linux 6.5.3   Marek Vasut
• [PATCH 15/19] ARM: dts: renesas: Synchronize RZ R8A774A1 RZ/G2M DTs with Linux 6.5.3   Adam Ford
• [PATCH 15/20] clk: renesas: Synchronize R8A779F0 S4 clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 15/25] console: Move SYS_PBSIZE into common/   Simon Glass
• [PATCH 15/35] cmd: pxe: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 15/36] video: Allow saving and restoring text-entry state   Simon Glass
• [PATCH 16/16] board: rzg2l: Add RZ/G2L SMARC EVK board   Paul Barker
• [PATCH 16/18] pinctrl: renesas: Synchronize R8A779A0 V3U PFC tables with Linux 6.5.3   Marek Vasut
• [PATCH 16/19] ARM: dts: renesas: Synchronize RZ R8A774B1 RZ/G2N DTs with Linux 6.5.3   Marek Vasut
• [PATCH 16/20] clk: renesas: Synchronize R8A779G0 V4H clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 16/25] bootm: Allow building when cleanup functions are missing   Simon Glass
• [PATCH 16/35] dm: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 16/36] video: Export vidconsole_entry_start()   Simon Glass
• [PATCH 17/18] pinctrl: renesas: Synchronize R8A779F0 S4 PFC tables with Linux 6.5.3   Marek Vasut
• [PATCH 17/19] ARM: dts: renesas: Synchronize RZ R8A774C0 RZ/G2E DTs with Linux 6.5.3   Marek Vasut
• [PATCH 17/20] clk: renesas: Synchronize R8A774A1 RZ/G2M clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 17/25] fdt: Move working_fdt into fdt_support   Simon Glass
• [PATCH 17/35] env: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 17/36] video: Support showing a cursor   Simon Glass
• [PATCH 18/18] pinctrl: renesas: Synchronize R8A779G0 V4H PFC tables with Linux 6.5.3   Marek Vasut
• [PATCH 18/19] ARM: dts: renesas: Synchronize RZ R8A774E1 RZ/G2H DTs with Linux 6.5.3   Marek Vasut
• [PATCH 18/20] clk: renesas: Synchronize R8A774B1 RZ/G2N clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 18/25] net: Depend on CONFIG_CMDLINE   Simon Glass
• [PATCH 18/35] initcall: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 18/36] expo: Add better error reporting   Simon Glass
• [PATCH 19/19] ARM: renesas: Align env eMMC device number with Linux 6.5.3 DT changes on R-Car Gen3 Salvator-X   Marek Vasut
• [PATCH 19/20] clk: renesas: Synchronize R8A774C0 RZ/G2E clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 19/25] log: Allow use without CONFIG_CMDLINE   Simon Glass
• [PATCH 19/35] image: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 19/36] expo: Fix up comments for get_cur_menuitem_text() et al   Simon Glass
• [PATCH 2/2] arm64: dts: ti: k3-j7200: Add MCU domain ESM instance   Keerthy
• [PATCH 2/2] arm: dts: k3-am625: Sync with kernel v6.6-rc1   Nishanth Menon
• [PATCH 2/2] arm: dts: k3-am625: Sync with kernel v6.6-rc1   Dhruva Gole
• [PATCH 2/2] arm: dts: k3-am625: Sync with kernel v6.6-rc1   Mattijs Korpershoek
• [PATCH 2/2] arm: dts: k3-am625: Sync with kernel v6.6-rc1   Tom Rini
• [PATCH 2/2] arm: dts: k3-am64: Bump dts from Linux v6.6-rc1   Roger Quadros
• [PATCH 2/2] arm: dts: rockchip: rock-5b: add support for PCIe3 and NVMe   FUKAUMI Naoki
• [PATCH 2/2] ARM: imx: Use default SAVED_DRAM_TIMING_BASE on Data Modul i.MX8M Plus eDM SBC   sbabic at denx.de
• [PATCH 2/2] board: Add support for Conclusive KSTR-SAMA5D27   Artur Rojek
• [PATCH 2/2] board: Add support for Conclusive KSTR-SAMA5D27   Eugen Hristev
• [PATCH 2/2] board: Add support for Conclusive KSTR-SAMA5D27   Artur Rojek
• [PATCH 2/2] board: Add support for Conclusive KSTR-SAMA5D27   Eugen Hristev
• [PATCH 2/2] board: dh_stm32mp1: Only print board code with CONFIG_SPL_DISPLAY_PRINT   Harald Seiler
• [PATCH 2/2] board: dh_stm32mp1: Only print board code with CONFIG_SPL_DISPLAY_PRINT   Marek Vasut
• [PATCH 2/2] configs: rockchip: add DOS_PARTITION to RK3308 boards defconfig   Massimo Pegorer
• [PATCH 2/2] configs: rockchip: add DOS_PARTITION to RK3308 boards defconfig   Kever Yang
• [PATCH 2/2] configs: rockchip: rk3308: enable CONFIG_OF_LIBFDT_OVERLAY   FUKAUMI Naoki
• [PATCH 2/2] dm: core: Adjust dump-sorting to get stats only when needed   Simon Glass
• [PATCH 2/2] doc: rockchip: Update and complete info about RK3308   Massimo Pegorer
• [PATCH 2/2] doc: rockchip: Update and complete info about RK3308   Johan Jonker
• [PATCH 2/2] doc: rockchip: Update and complete info about RK3308   Massimo Pegorer
• [PATCH 2/2] DONOTMERGE: j7200: device tree and defconfig update   Udit Kumar
• [PATCH 2/2] event: Rename rest of EVENT_SPY to EVENT_SPY_FULL or EVENT_SPY*   Marek Vasut
• [PATCH 2/2] event: Rename rest of EVENT_SPY to EVENT_SPY_FULL or EVENT_SPY*   Simon Glass
• [PATCH 2/2] image-host: increase path length when setting up the cipher.   Hugo Cornelis
• [PATCH 2/2] malloc_simple: add mem_malloc_init_simple()   Rasmus Villemoes
• [PATCH 2/2] malloc_simple: add mem_malloc_init_simple()   Simon Glass
• [PATCH 2/2] mtd: nand: raw: atmel: Add error handling when rb-gpios missing   Alexander Dahl
• [PATCH 2/2] mtd: nand: raw: atmel: Add error handling when rb-gpios missing   Michael Nazzareno Trimarchi
• [PATCH 2/2] nokia_rx51: Remove platform   Tom Rini
• [PATCH 2/2] nokia_rx51: Remove platform   Tom Rini
• [PATCH 2/2] risc-v: implement DBCN based debug console   Leo Liang
• [PATCH 2/2] risc-v: implement DBCN based debug console   Chanho Park
• [PATCH 2/2] risc-v: implement DBCN based debug console   Heinrich Schuchardt
• [PATCH 2/2] riscv: Correct event usage for riscv_cpu_probe/setup   Tom Rini
• [PATCH 2/2] riscv: Correct event usage for riscv_cpu_probe/setup   Milan P. Stanić
• [PATCH 2/2] riscv: dts: starfive: generate u-boot-spl.bin.normal.out   Heinrich Schuchardt
• [PATCH 2/2] riscv: dts: starfive: generate u-boot-spl.bin.normal.out   Chanho Park
• [PATCH 2/2] riscv: jh7110: enable riscv,timer in the device tree   Leo Liang
• [PATCH 2/2] rockchip: rk3568-nanopi-r5: Enable PCIe on NanoPi R5C and R5S   Kever Yang
• [PATCH 2/2] rockchip: rk356x-u-boot: Add bootph-all to i2c0_xfer pinctrl node   Kever Yang
• [PATCH 2/2] serial: introduce CONFIG_CONSOLE_FLUSH_ON_NEWLINE   Rasmus Villemoes
• [PATCH 2/2] serial: introduce CONFIG_CONSOLE_FLUSH_ON_NEWLINE   Michal Suchánek
• [PATCH 2/2] sifive: ccache: add clear LIM area   Ben Dooks
• [PATCH 2/2] stdio: fix stdio_deregister_dev()   Heinrich Schuchardt
• [PATCH 2/3] arm64: versal: Disable the lock option for mini ospi and qspi   Venkatesh Yadav Abbarapu
• [PATCH 2/3] arm64: versal: Disable the lock option for mini ospi and qspi   Michal Simek
• [PATCH 2/3] ARM: dts: stm32: add pin map for CAN controller on stm32f4   Dario Binacchi
• [PATCH 2/3] ARM: dts: stm32: add pin map for CAN controller on stm32f4   Patrice CHOTARD
• [PATCH 2/3] ARM: dts: stm32: add pin map for CAN controller on stm32f4   Patrice CHOTARD
• [PATCH 2/3] arm: mach-k3: j7200: Add mcu_timer0 id to the dev list   Reid Tonking
• [PATCH 2/3] arm: mach-k3: j7200: Add mcu_timer0 id to the dev list   Nishanth Menon
• [PATCH 2/3] arm: mach-k3: j7200: Add mcu_timer0 id to the dev list   reidt
• [PATCH 2/3] arm: mvebu: Espressobin: move network setup into a separate function   Robert Marko
• [PATCH 2/3] arm: mvebu: Espressobin: move network setup into a separate function   Stefan Roese
• [PATCH 2/3] Azure: Split sandbox and qemu test.py runs   Tom Rini
• [PATCH 2/3] Azure: Split sandbox and qemu test.py runs   Simon Glass
• [PATCH 2/3] Azure: Split sandbox and qemu test.py runs   Tom Rini
• [PATCH 2/3] Azure: Split sandbox and qemu test.py runs   Tom Rini
• [PATCH 2/3] board: Remove essentially empty board files and Makefiles   Tom Rini
• [PATCH 2/3] board: stm32f746-disco: refactor the display of the ST logo   Patrice CHOTARD
• [PATCH 2/3] common: Drop time.h from common header   Simon Glass
• [PATCH 2/3] common: Drop time.h from common header   Tom Rini
• [PATCH 2/3] common: Drop time.h from common header   Tom Rini
• [PATCH 2/3] dt-bindings: mtd: binman-partition: Add binman labels   Simon Glass
• [PATCH 2/3] fdt: kaslr seed from tpm entropy   Ilias Apalodimas
• [PATCH 2/3] imx: hab: Improve the hab_auth_img_or_fail usage text   Fabio Estevam
• [PATCH 2/3] imx: hab: Improve the hab_auth_img_or_fail usage text   sbabic at denx.de
• [PATCH 2/3] net: bootp: BOOTP/DHCPv4 retransmission improvements   seanedmond at linux.microsoft.com
• [PATCH 2/3] net: bootp: BOOTP/DHCPv4 retransmission improvements   Lothar Waßmann
• [PATCH 2/3] trace: Move trace_clocks description above record offset calculation   Michal Simek
• [PATCH 2/3] trace: Move trace_clocks description above record offset calculation   Simon Glass
• [PATCH 2/3] xilinx: versal: Do not setup boot_targets if driver is not enabled   Venkatesh Yadav Abbarapu
• [PATCH 2/4] arm: dts: Add support for AM62x LP SK   Nitin Yadav
• [PATCH 2/4] arm: dts: Add support for AM62x LP SK   Nishanth Menon
• [PATCH 2/4] arm: dts: Add support for AM62x LP SK   Nitin Yadav
• [PATCH 2/4] arm: dts: Add support for AM62x LP SK   Nishanth Menon
• [PATCH 2/4] arm: dts: k3*: Use local header for SERDES MUX idle-state values   Nishanth Menon
• [PATCH 2/4] Azure: Rework build the world jobs   Tom Rini
• [PATCH 2/4] binman: test: rename 275_fit_align.dts -> 275_fit_align_external.dts   Rasmus Villemoes
• [PATCH 2/4] binman: test: rename 275_fit_align.dts -> 275_fit_align_external.dts   Simon Glass
• [PATCH 2/4] configs: at91: sam9x60_curiosity: Add sam9x60_curiosity_nandflash_defconfig   Durai Manickam KR
• [PATCH 2/4] image: fit: Improve functions description comments   Massimo Pegorer
• [PATCH 2/4] image: fit: Improve functions description comments   Simon Glass
• [PATCH 2/4] power: domain: add SCMI driver   AKASHI Takahiro
• [PATCH 2/5] arm64: dts: imx8mp: Switch to DT overlays for i.MX8MP DHCOM SoM   Marek Vasut
• [PATCH 2/5] arm64: versal: Add no-wp DT property in OSPI flash node   Michal Simek
• [PATCH 2/5] core: return FDT_ADDR_T_NONE from devfdt_get_addr_[size_]name() on errors   Matthias Schiffer
• [PATCH 2/5] drivers/usb/dwc3: zynqmp: only free reset gpio if we have one   Michal Simek
• [PATCH 2/5] drivers: net: fsl-mc: add support for MC reserved memory   Laurentiu Tudor
• [PATCH 2/5] iot2050: rename overlay sources to .dtso   Rasmus Villemoes
• [PATCH 2/5] iot2050: rename overlay sources to .dtso   Jan Kiszka
• [PATCH 2/6] arm: dts: k3-am64-evm: Mark dependent nodes for pre-relocation phase   Roger Quadros
• [PATCH 2/6] freescale: fix long help handling in mac command   Heinrich Schuchardt
• [PATCH 2/6] phy: Set phy->dev to NULL when generic_phy_get_by_index_nodev() fails   Jonas Karlman
• [PATCH 2/7] configs: default activate CONFIG_RNG_STM32 for STM32MP13x platforms   Gatien Chevallier
• [PATCH 2/7] configs: default activate CONFIG_RNG_STM32 for STM32MP13x platforms   Heinrich Schuchardt
• [PATCH 2/7] configs: default activate CONFIG_RNG_STM32 for STM32MP13x platforms   Patrick DELAUNAY
• [PATCH 2/7] configs: default activate CONFIG_RNG_STM32 for STM32MP13x platforms   Gatien CHEVALLIER
• [PATCH 2/7] net: dwc_eth_qos: Return error code when start fails   Kever Yang
• [PATCH 2/7] riscv: dts: add binman_linux.dtsi for opensbi os boot mode   Randolph
• [PATCH 2/8] btool: mkeficapsule: Generate capsule through a config file   Sughosh Ganu
• [PATCH 2/8] drivers: rollback: Add TPM2 implementation of rollback devices   seanedmond at linux.microsoft.com
• [PATCH 2/8] x86: Add some log categories   Bin Meng
• [PATCH 2/9] cmd: bdinfo: Implement support for printing memory layout via bdinfo -m   Marek Vasut
• [PATCH 2/9] cmd: bdinfo: Implement support for printing memory layout via bdinfo -m   Simon Glass
• [PATCH 20/20] clk: renesas: Synchronize R8A774E1 RZ/G2H clock tables with Linux 6.5.3   Marek Vasut
• [PATCH 20/25] video: Allow use without CONFIG_CMDLINE   Simon Glass
• [PATCH 20/35] fs: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 20/36] expo: Use switch statements more for object types   Simon Glass
• [PATCH 21/25] video: Dont require the font command   Simon Glass
• [PATCH 21/35] cpu: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 21/36] expo: Correct some swallowed errors in scene   Simon Glass
• [PATCH 22/25] efi: Depend on CMDLINE for efi_loader   Simon Glass
• [PATCH 22/35] crypto: rsa: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 22/36] expo: Correct the logic for duplicate-ID detection   Simon Glass
• [PATCH 23/25] cmd: Make all commands depend on CMDLINE   Simon Glass
• [PATCH 23/35] gpio: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 23/36] expo: Allow highlighting other scene-object types   Simon Glass
• [PATCH 24/25] sandbox: Avoid requiring cmdline   Simon Glass
• [PATCH 24/35] hwspinlock: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 24/36] expo: Add a function to write a property to a devicetree   Simon Glass
• [PATCH 25/25] sandbox: Add a test for disabling CONFIG_CMDLINE   Simon Glass
• [PATCH 25/35] sf: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 25/36] expo: Make calculation of an object bounding box generic   Simon Glass
• [PATCH 26/35] mtd: ubifs: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 26/36] expo: Allow rendering the background of any object   Simon Glass
• [PATCH 27/35] net: eth: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 27/36] expo: Add some scene fields needed for text entry   Simon Glass
• [PATCH 28/35] net: miiphybb: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 28/36] expo: Add basic support for textline objects   Simon Glass
• [PATCH 29/35] net: phy: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 29/36] expo: Support opening a textline   Simon Glass
• [PATCH 3/3] arm64: versal_net: Disable the lock option for mini ospi and qspi   Venkatesh Yadav Abbarapu
• [PATCH 3/3] arm: dts: j7200: dtb sync with Linux 6.5-rc1   Reid Tonking
• [PATCH 3/3] arm: dts: j7200: dtb sync with Linux 6.5-rc1   Nishanth Menon
• [PATCH 3/3] arm: dts: j7200: dtb sync with Linux 6.5-rc1   reidt
• [PATCH 3/3] arm: dts: j7200: dtb sync with Linux 6.5-rc1   Manorit Chawdhry
• [PATCH 3/3] arm: dts: j7200: dtb sync with Linux 6.5-rc1   reidt
• [PATCH 3/3] ARM: dts: stm32f429: put can2 in secondary mode   Dario Binacchi
• [PATCH 3/3] ARM: dts: stm32f429: put can2 in secondary mode   Patrice CHOTARD
• [PATCH 3/3] ARM: dts: stm32f429: put can2 in secondary mode   Patrice CHOTARD
• [PATCH 3/3] arm: mvebu: eDPU: support new board revision   Robert Marko
• [PATCH 3/3] arm: mvebu: eDPU: support new board revision   Stefan Roese
• [PATCH 3/3] Azure: Add sandbox64 to CI   Tom Rini
• [PATCH 3/3] Azure: Add sandbox64 to CI   Simon Glass
• [PATCH 3/3] Azure: Add sandbox64 to CI   Tom Rini
• [PATCH 3/3] common: Drop linux/string.h from common header   Simon Glass
• [PATCH 3/3] dt-bindings: mtd: binman-partitions: Add alignment properties   Simon Glass
• [PATCH 3/3] exynos: Cleanup exynos_init   Tom Rini
• [PATCH 3/3] imx: hab: Explain that ivt_offset is optional   Fabio Estevam
• [PATCH 3/3] imx: hab: Explain that ivt_offset is optional   sbabic at denx.de
• [PATCH 3/3] net: bootp: add config option BOOTP_RANDOM_XID   seanedmond at linux.microsoft.com
• [PATCH 3/3] Remove the hardcoded ST logo no longer in use   Patrice CHOTARD
• [PATCH 3/3] trace: Fix alignment logic in flyrecord header   Michal Simek
• [PATCH 3/3] trace: Fix alignment logic in flyrecord header   Simon Glass
• [PATCH 3/3] trace: Fix alignment logic in flyrecord header   Michal Simek
• [PATCH 3/3] xilinx: zynqmp: Do not setup boot_targets if driver is not enabled   Venkatesh Yadav Abbarapu
• [PATCH 3/4] ARM: dts: at91: sam9x60_curiosity: Enable NAND support   Durai Manickam KR
• [PATCH 3/4] arm: dts: k3-am62-lp-sk-binman: Add binman support   Nitin Yadav
• [PATCH 3/4] arm: dts: k3-am62-lp-sk-binman: Add binman support   Nishanth Menon
• [PATCH 3/4] CI: Combine tools-only and envtools jobs   Tom Rini
• [PATCH 3/4] dt-bindings: ti-serdes: Deprecate header with constants with v6.6-rc1   Nishanth Menon
• [PATCH 3/4] sandbox: add SCMI power domain protocol support for testing   AKASHI Takahiro
• [PATCH 3/4] spl: atf: Fix potential but not occurring bug   Massimo Pegorer
• [PATCH 3/4] spl: atf: Fix potential but not occurring bug   Simon Glass
• [PATCH 3/4] tools: binman: add test case for fit, align without fit, external-offset   Rasmus Villemoes
• [PATCH 3/4] tools: binman: add test case for fit, align without fit, external-offset   Simon Glass
• [PATCH 3/5] arm64: dts: imx8mp: Update i.MX8MP DHCOM SoM DT to production rev.200   Marek Vasut
• [PATCH 3/5] arm64: zynqmp: Fix i2c address for si570_user1 clock   Michal Simek
• [PATCH 3/5] arm64: zynqmp: rename overlay sources to .dtso   Rasmus Villemoes
• [PATCH 3/5] armv8: fsl-layerscape: create bypass smmu mapping for MC   Laurentiu Tudor
• [PATCH 3/5] armv8: fsl-layerscape: create bypass smmu mapping for MC   Robin Murphy
• [PATCH 3/5] armv8: fsl-layerscape: create bypass smmu mapping for MC   Laurentiu Tudor
• [PATCH 3/5] armv8: fsl-layerscape: create bypass smmu mapping for MC   Robin Murphy
• [PATCH 3/5] armv8: fsl-layerscape: create bypass smmu mapping for MC   Laurentiu Tudor
• [PATCH 3/5] core: introduce dev_read_addr_name[_size]_ptr() functions   Matthias Schiffer
• [PATCH 3/5] xilinx: zynqmp: move fdt_addr so we can use devices with less memory   Michal Simek
• [PATCH 3/6] arm: dts: k3-am642-sk: Fix boot   Roger Quadros
• [PATCH 3/6] eeprom: SiFive Unmatched: re-implement mac command   Heinrich Schuchardt
• [PATCH 3/6] usb: dwc3: Use generic_phy_valid() helper   Jonas Karlman
• [PATCH 3/7] net: dwc_eth_qos: Stop spam of RX packet not available message   Kever Yang
• [PATCH 3/7] rng: stm32: Implement configurable RNG clock error detection   Gatien Chevallier
• [PATCH 3/7] rng: stm32: Implement configurable RNG clock error detection   Heinrich Schuchardt
• [PATCH 3/7] rng: stm32: Implement configurable RNG clock error detection   Patrick DELAUNAY
• [PATCH 3/7] rng: stm32: Implement configurable RNG clock error detection   Patrick DELAUNAY
• [PATCH 3/7] spl: riscv: opensbi: change the default os_type as varible   Randolph
• [PATCH 3/8] binman: capsule: Generate capsules through config file   Sughosh Ganu
• [PATCH 3/8] binman: capsule: Generate capsules through config file   Simon Glass
• [PATCH 3/8] binman: capsule: Generate capsules through config file   Sughosh Ganu
• [PATCH 3/8] binman: capsule: Generate capsules through config file   Simon Glass
• [PATCH 3/8] binman: capsule: Generate capsules through config file   Sughosh Ganu
• [PATCH 3/8] common: Add OS anti-rollback validation using rollback devices   seanedmond at linux.microsoft.com
• [PATCH 3/8] x86: samus_tpl: Correct text base and alloc sizes   Bin Meng
• [PATCH 3/9] cmd: bdinfo: Implement support for printing ethernet settings via bdinfo -e   Marek Vasut
• [PATCH 3/9] cmd: bdinfo: Implement support for printing ethernet settings via bdinfo -e   Simon Glass
• [PATCH 30/32] fdt: Allow the devicetree to come from a bloblist   Ilias Apalodimas
• [PATCH 30/32] fdt: Allow the devicetree to come from a bloblist   Simon Glass
• [PATCH 30/32] fdt: Allow the devicetree to come from a bloblist   Ilias Apalodimas
• [PATCH 30/32] fdt: Allow the devicetree to come from a bloblist   Simon Glass
• [PATCH 30/32] fdt: Allow the devicetree to come from a bloblist   Ilias Apalodimas
• [PATCH 30/32] fdt: Allow the devicetree to come from a bloblist   Michal Simek
• [PATCH 30/32] fdt: Allow the devicetree to come from a bloblist   Ilias Apalodimas
• [PATCH 30/32] fdt: Allow the devicetree to come from a bloblist   Michal Simek
• [PATCH 30/32] fdt: Allow the devicetree to come from a bloblist   Ilias Apalodimas
• [PATCH 30/32] fdt: Allow the devicetree to come from a bloblist   Simon Glass
• [PATCH 30/32] fdt: Allow the devicetree to come from a bloblist   Ilias Apalodimas
• [PATCH 30/35] serial: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 30/36] expo: Plumb in textlines to a scene   Simon Glass
• [PATCH 31/35] spi: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 31/36] video: Mark truetype_measure() static   Simon Glass
• [PATCH 32/32] pci: serial: Support reading PCI-register size with base   Pali Rohár
• [PATCH 32/32] pci: serial: Support reading PCI-register size with base   Pali Rohár
• [PATCH 32/32] pci: serial: Support reading PCI-register size with base   Tom Rini
• [PATCH 32/32] pci: serial: Support reading PCI-register size with base   Pali Rohár
• [PATCH 32/32] pci: serial: Support reading PCI-register size with base   Pali Rohár
• [PATCH 32/32] pci: serial: Support reading PCI-register size with base   Tom Rini
• [PATCH 32/32] pci: serial: Support reading PCI-register size with base   Pali Rohár
• [PATCH 32/35] sysreset: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 32/36] expo: Support handling any key in cedit   Simon Glass
• [PATCH 33/35] timer: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 33/36] expo: Plumb in textline to cedit   Simon Glass
• [PATCH 34/35] wdt: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 34/36] expo: Support building an expo with a textline   Simon Glass
• [PATCH 35/35] post: Remove unused NEEDS_MANUAL_RELOC code bits   Marek Vasut
• [PATCH 35/36] expo: Update tests to include textline   Simon Glass
• [PATCH 36/36] expo: Update documentation to include textline   Simon Glass
• [PATCH 4/4] ARM: dts: at91: sam9x60_curiosity: fix eeprom compatible   Durai Manickam KR
• [PATCH 4/4] arm: dts: k3-am642: Sync with kernel v6.6-rc1   Nishanth Menon
• [PATCH 4/4] binman: update documentation for fit,align property   Rasmus Villemoes
• [PATCH 4/4] binman: update documentation for fit,align property   Simon Glass
• [PATCH 4/4] binman: update documentation for fit,align property   Jonas Karlman
• [PATCH 4/4] binman: update documentation for fit,align property   Rasmus Villemoes
• [PATCH 4/4] binman: update documentation for fit,align property   Simon Glass
• [PATCH 4/4] board: ti: am62x: add am62x_lpsk_* defconfigs and env files   Nitin Yadav
• [PATCH 4/4] board: ti: am62x: add am62x_lpsk_* defconfigs and env files   Nishanth Menon
• [PATCH 4/4] CI: Drop some jobs we didn't really utilize   Tom Rini
• [PATCH 4/4] spl: atf: Reduce SPL code size   Massimo Pegorer
• [PATCH 4/4] spl: atf: Reduce SPL code size   Simon Glass
• [PATCH 4/4] test: dm: add SCMI power domain protocol test   AKASHI Takahiro
• [PATCH 4/5] arm64: dts: imx8mp: Drop i.MX8MP DHCOM rev.100 PHY address workaround from PDK3 DT   Marek Vasut
• [PATCH 4/5] arm64: zynqmp: Add resets property for CAN nodes   Michal Simek
• [PATCH 4/5] board: freescale: ls2080a: declare MC reserved regions   Laurentiu Tudor
• [PATCH 4/5] pinctrl: single: fix compile warnings with PHYS_64BIT on 32bit   Matthias Schiffer
• [PATCH 4/5] sandbox: rename overlay sources to .dtso   Rasmus Villemoes
• [PATCH 4/5] sandbox: rename overlay sources to .dtso   Simon Glass
• [PATCH 4/5] xilinx: zynqmp: add Beckhoff CX8200   Michal Simek
• [PATCH 4/5] xilinx: zynqmp: add Beckhoff CX8200   Steffen Dirkwinkel
• [PATCH 4/5] xilinx: zynqmp: add Beckhoff CX8200   Michal Simek
• [PATCH 4/5] xilinx: zynqmp: add Beckhoff CX8200   Steffen Dirkwinkel
• [PATCH 4/5] xilinx: zynqmp: add Beckhoff CX8200   Michal Simek
• [PATCH 4/6] arm: dts: k3-am642-sk: Mark dependent nodes for pre-relocation phase   Roger Quadros
• [PATCH 4/6] eeprom: starfive: re-implement mac command   Heinrich Schuchardt
• [PATCH 4/6] scsi: ceva: Use generic_phy_valid() helper   Jonas Karlman
• [PATCH 4/6] scsi: ceva: Use generic_phy_valid() helper   Michal Simek
• [PATCH 4/7] net: dwc_eth_qos: Add glue driver for GMAC on Rockchip RK3568   Kever Yang
• [PATCH 4/7] riscv: dts: introduce SPL_LOAD_FIT_OPENSBI_OS_BOOT symbol   Randolph
• [PATCH 4/7] rng: stm32: add RNG clock frequency restraint   Gatien Chevallier
• [PATCH 4/7] rng: stm32: add RNG clock frequency restraint   Patrick DELAUNAY
• [PATCH 4/8] common: Add OS anti-rollback grace version   seanedmond at linux.microsoft.com
• [PATCH 4/8] doc: Document capsule generation through a config file   Sughosh Ganu
• [PATCH 4/8] x86: spl: Change the condition for copying U-Boot to RAM   Bin Meng
• [PATCH 4/9] configs: sandbox: Enable GETOPT for sandbox and sandbox64 target   Marek Vasut
• [PATCH 4/9] configs: sandbox: Enable GETOPT for sandbox and sandbox64 target   Simon Glass
• [PATCH 5/4] mkimage: update man page and -h output   Rasmus Villemoes
• [PATCH 5/5] arm64: dts: imx8mp: Add DT overlay describing i.MX8MP DHCOM SoM rev.100   Marek Vasut
• [PATCH 5/5] arm64: zynqmp: Update ECAM size to discover up to 256 buses   Michal Simek
• [PATCH 5/5] board: freescale: ls1088a: declare MC reserved regions   Laurentiu Tudor
• [PATCH 5/5] doc: use .dtso as extension for device tree overlay sources   Rasmus Villemoes
• [PATCH 5/5] doc: use .dtso as extension for device tree overlay sources   Simon Glass
• [PATCH 5/5] treewide: use dev_read_addr_*_ptr() where appropriate   Matthias Schiffer
• [PATCH 5/6] arm: dts: k3-am625-sk: Fix boot   Roger Quadros
• [PATCH 5/6] eeprom: starfive: raw dump if unsupported data version   Heinrich Schuchardt
• [PATCH 5/6] net: zynq: Use generic_phy_valid() helper   Jonas Karlman
• [PATCH 5/6] net: zynq: Use generic_phy_valid() helper   Michal Simek
• [PATCH 5/7] net: dwc_eth_qos_rockchip: Add support for RK3588   Kever Yang
• [PATCH 5/7] rng: stm32: add error concealment sequence   Gatien Chevallier
• [PATCH 5/7] rng: stm32: add error concealment sequence   Patrick DELAUNAY
• [PATCH 5/7] spl: riscv: add os type for next booting stage   Randolph
• [PATCH 5/8] dm: test: Add a test for rollback driver   seanedmond at linux.microsoft.com
• [PATCH 5/8] sandbox: capsule: Add a config file for generating capsules   Sughosh Ganu
• [PATCH 5/8] x86: broadwell: Avoid initing the CPU twice   Bin Meng
• [PATCH 5/9] test: bdinfo: Rename bdinfo_test_move() to bdinfo_test_full()   Marek Vasut
• [PATCH 5/9] test: bdinfo: Rename bdinfo_test_move() to bdinfo_test_full()   Simon Glass
• [PATCH 6/6] arm: dts: k3-am625-sk: Mark dependent nodes for pre-relocation phase   Roger Quadros
• [PATCH 6/6] eeprom: starfive: add 'mac raw' command   Heinrich Schuchardt
• [PATCH 6/6] stm32mp15: Use u-boot-spl-stm32.bin instead of u-boot-spl.stm32   Simon Glass
• [PATCH 6/6] video: rockchip: dw_mipi_dsi: Use generic_phy_valid() helper   Jonas Karlman
• [PATCH 6/6] video: rockchip: dw_mipi_dsi: Use generic_phy_valid() helper   Kever Yang
• [PATCH 6/6] video: rockchip: dw_mipi_dsi: Use generic_phy_valid() helper   Jonas Karlman
• [PATCH 6/7] andes: config: add riscv falcon mode for ae350 platform   Randolph
• [PATCH 6/7] configs: rockchip: Enable ethernet driver on RK356x boards   Kever Yang
• [PATCH 6/7] rng: stm32: Implement custom RNG configuration support   Gatien Chevallier
• [PATCH 6/7] rng: stm32: Implement custom RNG configuration support   Patrick DELAUNAY
• [PATCH 6/8] test: capsule: Generate capsules through config file   Sughosh Ganu
• [PATCH 6/8] tpm: Fix issues relating to NV Indexes   seanedmond at linux.microsoft.com
• [PATCH 6/8] x86: broadwell: Set up MTRRs   Bin Meng
• [PATCH 6/8] x86: broadwell: Set up MTRRs   Simon Glass
• [PATCH 6/9] test: bdinfo: Test both bdinfo and bdinfo -a   Marek Vasut
• [PATCH 6/9] test: bdinfo: Test both bdinfo and bdinfo -a   Simon Glass
• [PATCH 7/7] ARM: dts: stm32: add RNG node for STM32MP13x platforms   Gatien Chevallier
• [PATCH 7/7] ARM: dts: stm32: add RNG node for STM32MP13x platforms   Patrick DELAUNAY
• [PATCH 7/7] configs: rockchip: Enable ethernet driver on RK3588 boards   Kever Yang
• [PATCH 7/7] fs: Fix a confusing error about overlapping regions   Simon Glass
• [PATCH 7/7] fs: Fix a confusing error about overlapping regions   Tom Rini
• [PATCH 7/7] fs: Fix a confusing error about overlapping regions   Simon Glass
• [PATCH 7/7] fs: Fix a confusing error about overlapping regions   Tom Rini
• [PATCH 7/7] fs: Fix a confusing error about overlapping regions   Simon Glass
• [PATCH 7/7] fs: Fix a confusing error about overlapping regions   Tom Rini
• [PATCH 7/7] fs: Fix a confusing error about overlapping regions   Simon Glass
• [PATCH 7/7] fs: Fix a confusing error about overlapping regions   Tom Rini
• [PATCH 7/7] fs: Fix a confusing error about overlapping regions   Simon Glass
• [PATCH 7/7] riscv: spl: andes: Move the DTB in front of kernel   Randolph
• [PATCH 7/8] btool: mkeficapsule: Add support for EFI empty capsule generation   Sughosh Ganu
• [PATCH 7/8] sandbox: tpm: Fix TPM2_CC_NV_DEFINE_SPACE command   seanedmond at linux.microsoft.com
• [PATCH 7/8] spl: x86: Avoid starting up PCI automatically in SPL   Bin Meng
• [PATCH 7/8] spl: x86: Avoid starting up PCI automatically in SPL   Simon Glass
• [PATCH 7/9] test: bdinfo: Test bdinfo -h   Marek Vasut
• [PATCH 7/9] test: bdinfo: Test bdinfo -h   Simon Glass
• [PATCH 8/8] binman: capsule: Add support for generating EFI empty capsules   Sughosh Ganu
• [PATCH 8/8] doc: rollback: anti-rollback verification   seanedmond at linux.microsoft.com
• [PATCH 8/8] x86: doc: Update the list of supported Chromebooks   Bin Meng
• [PATCH 8/9] test: bdinfo: Test bdinfo -m   Marek Vasut
• [PATCH 8/9] test: bdinfo: Test bdinfo -m   Simon Glass
• [PATCH 9/9] test: bdinfo: Test bdinfo -e   Marek Vasut
• [PATCH 9/9] test: bdinfo: Test bdinfo -e   Simon Glass
• [PATCH] .gitlab-ci: Test sandbox64 board in addition to sandbox   Marek Vasut
• [PATCH] .gitlab-ci: Test sandbox64 board in addition to sandbox   Tom Rini
• [PATCH] .gitlab-ci: Test sandbox64 board in addition to sandbox   Tom Rini
• [PATCH] .gitlab-ci: Test sandbox64 board in addition to sandbox   Marek Vasut
• [PATCH] .gitlab-ci: Test sandbox64 board in addition to sandbox   Marek Vasut
• [PATCH] .gitlab-ci: Test sandbox64 board in addition to sandbox   Tom Rini
• [PATCH] addrmap: Fix off by one in addrmap_set_entry()   Simon Glass
• [PATCH] Adjust gitignore for /build   Rong Tao
• [PATCH] Adjust gitignore for /build   Simon Glass
• [PATCH] Adjust gitignore for /build   Alper Nebi Yasak
• [PATCH] Adjust gitignore for /build   Simon Glass
• [PATCH] am33xx: ignore return value from usb_ether_init()   Trevor Woerner
• [PATCH] am33xx: ignore return value from usb_ether_init()   Tom Rini
• [PATCH] am33xx: ignore return value from usb_ether_init()   Trevor Woerner
• [PATCH] am33xx: ignore return value from usb_ether_init()   Tom Rini
• [PATCH] andes: rearrange defconfig and dts and memory layout for SPL.   Randolph
• [PATCH] andes: rearrange defconfig and dts and memory layout for SPL.   Tom Rini
• [PATCH] arm64: versal: Add SelectMAP boot mode identification   Polak, Leszek
• [PATCH] arm64: versal: Add SelectMAP boot mode identification   Michal Simek
• [PATCH] arm64: versal: Add SelectMAP boot mode identification   Stefan Roese
• [PATCH] arm64: versal: Do not define boot command for mini configurations   Michal Simek
• [PATCH] arm64: versal: Do not define boot command for mini configurations   Michal Simek
• [PATCH] arm64: xilinx: Do not use '_' in si5335 DT node names   Michal Simek
• [PATCH] arm64: xilinx: Guard distro boot variable generation   Michal Simek
• [PATCH] arm64: xilinx: Guard distro boot variable generation   Michal Simek
• [PATCH] arm64: zynqmp: Add support for K26 rev2 boards   Michal Simek
• [PATCH] arm64: zynqmp: Corrected pcap_prog register address   lukas.funke-oss at weidmueller.com
• [PATCH] arm64: zynqmp: Corrected pcap_prog register address   Michal Simek
• [PATCH] arm64: zynqmp: Describe assigned-clocks for uarts   Michal Simek
• [PATCH] arm64: zynqmp: Do not use '_' in DT node names   Michal Simek
• [PATCH] arm64: zynqmp: Remove resetin/out from K24 psu_init   Michal Simek
• [PATCH] arm64: zynqmp: Rename dt overlay file names from dts to dtso   Michal Simek
• [PATCH] arm64: zynqmp: Setup default si570 frequency to 156.25MHz   Michal Simek
• [PATCH] arm: apple: Add initial Apple M2 Ultra support   Janne Grunau
• [PATCH] arm: apple: Add initial Apple M2 Ultra support   Simon Glass
• [PATCH] arm: apple: Add initial Apple M2 Ultra support   Mark Kettenis
• [PATCH] arm: apple: Add initial Apple M2 Ultra support   Mark Kettenis
• [PATCH] arm: apple: Add initial Apple M2 Ultra support   Simon Glass
• [PATCH] ARM: dts: am335x-pocketbeagle: choose tick-timer   Robert Nelson
• [PATCH] ARM: dts: am335x-pocketbeagle: choose tick-timer   Nishanth Menon
• [PATCH] ARM: dts: am335x-pocketbeagle: choose tick-timer   Trevor Woerner
• [PATCH] ARM: dts: am335x-pocketbeagle: choose tick-timer   Nishanth Menon
• [PATCH] arm: dts: imx8mm_evk: Fix PMIC definition   Alexander Koch
• [PATCH] arm: dts: k3-j7*: ddr: Update to 0.10 version of DDR config tool   Bryan Brattlof
• [PATCH] arm: dts: k3-j7*: ddr: Update to 0.10 version of DDR config tool   Tom Rini
• [PATCH] ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs on Salvator-X boards   Marek Vasut
• [PATCH] arm: dts: xilinx: Remove undocumented is-dual property   Michal Simek
• [PATCH] ARM: imx: Drop CONFIG_USE_BOOTCOMMAND=n on i.MX6 DHSOM   sbabic at denx.de
• [PATCH] ARM: imx: Select 2 DRAM banks on Data Modul i.MX8M Mini eDM SBC   sbabic at denx.de
• [PATCH] ARM: imx: Use default SAVED_DRAM_TIMING_BASE on DH i.MX8M Plus DHCOM   sbabic at denx.de
• [PATCH] arm: mach-k3: common: fix compile warnings with PHYS_64BIT on 32bit   Matthias Schiffer
• [PATCH] arm: mach-k3: j721s2: Add mcu_timer0 id to the dev list   Manorit Chawdhry
• [PATCH] arm: mvebu: sata_mv: Add bootstd hook to enable sata_bootdev   Tony Dinh
• [PATCH] arm: mvebu: sata_mv: Add bootstd hook to enable sata_bootdev   Tony Dinh
• [PATCH] arm: mvebu: sata_mv: Add bootstd hook to enable sata_bootdev   Simon Glass
• [PATCH] arm: mvebu: sata_mv: Add bootstd hook to enable sata_bootdev   Tony Dinh
• [PATCH] arm: mvebu: sata_mv: Add bootstd hook to enable sata_bootdev   Stefan Roese
• [PATCH] arm: mvebu: sata_mv: Add bootstd hook to enable sata_bootdev   Tony Dinh
• [PATCH] ARM: renesas: Enable DM_ETH_PHY on 64-bit R-Car boards   Marek Vasut
• [PATCH] arm: rpi: set boot_targets with correct macro expansion   Date Huang
• [PATCH] arm: rpi: set boot_targets with correct macro expansion   Simon Glass
• [PATCH] arm: rpi: set boot_targets with correct macro expansion   黃 宇強
• [PATCH] ARM: vexpress_ca9x4: Add missing flash width config option   Patryk Biel
• [PATCH] ARM: vexpress_ca9x4: Add missing flash width config option   Kristian Amlie
• [PATCH] binman: doc: fix reference tag placement for Logging section   Massimo Pegorer
• [PATCH] binman: doc: fix reference tag placement for Logging section   Heinrich Schuchardt
• [PATCH] binman: doc: fix reference tag placement for Logging section   Massimo Pegorer
• [PATCH] binman: doc: fix reference tag placement for Logging section   Simon Glass
• [PATCH] binman: Fix SyntaxWarning: invalid escape sequence '\('   Rong Tao
• [PATCH] binman: Fix SyntaxWarning: invalid escape sequence '\('   Simon Glass
• [PATCH] binman: Fix SyntaxWarning: invalid escape sequence '\('   荣涛
• [PATCH] binman: openssl: x509: ti_secure_rom: Add support for bootcore_opts   Neha Malcom Francis
• [PATCH] binman: openssl: x509: ti_secure_rom: Add support for bootcore_opts   Kumar, Udit
• [PATCH] bmips: Add Inteno XG6846 board   Linus Walleij
• [PATCH] bmips: Add Inteno XG6846 board   Tom Rini
• [PATCH] bmips: Add Inteno XG6846 board   Linus Walleij
• [PATCH] bmips: Add Inteno XG6846 board   Tom Rini
• [PATCH] bmips: Add Inteno XG6846 board   Daniel Schwierzeck
• [PATCH] bmips: Add Inteno XG6846 board   Daniel Schwierzeck
• [PATCH] bmips: Add Inteno XG6846 board   Tom Rini
• [PATCH] bmips: Add Inteno XG6846 board   Tom Rini
• [PATCH] bmips: Add Inteno XG6846 board   Linus Walleij
• [PATCH] bmips: Add Inteno XG6846 board   Tom Rini
• [PATCH] board/km/cent2: Fix buffer overflow when fixing MAC address   Francois Berder
• [PATCH] board: LicheePi_Zero: add emac support   clbcjt at outlook.com
• [PATCH] board: LicheePi_Zero: add emac support   Andre Przywara
• [PATCH] board: ti: j721s2: MAINTAINERS: Update the MAINTAINERS File.   Manorit Chawdhry
• [PATCH] boot/pxe-utils: populate initrd_filesize for extlinux boot   Ryan Lahfa
• [PATCH] boot/pxe-utils: populate initrd_filesize for extlinux boot   Ryan Lahfa
• [PATCH] boot/pxe-utils: populate initrd_filesize for extlinux boot   Tom Rini
• [PATCH] bootstd: Drop some TODOs   Tony Dinh
• [PATCH] bootstd: sata: Add bootstd support for ahci sata   Tony Dinh
• [PATCH] bootstd: sata: Add bootstd support for ahci sata   Tony Dinh
• [PATCH] bootstd: Scan all bootdevs in a boot_targets entry   Simon Glass
• [PATCH] bootstd: use ARCH_DMA_MINALIGN in memalign() when allocating memory   Tony Dinh
• [PATCH] bootstd: use ARCH_DMA_MINALIGN in memalign() when allocating memory   Simon Glass
• [PATCH] buildman: Disable CONFIG_CMD_CONFIG for reproduceable build   Simon Glass
• [PATCH] buildman: Disable CONFIG_CMD_CONFIG for reproduceable build   Tom Rini
• [PATCH] buildman: Fix full help for Python 3.8   Simon Glass
• [PATCH] buildman: Fix full help for Python 3.8   Simon Glass
• [PATCH] clk: Add GPIO-controlled clock gate driver   Sean Anderson
• [PATCH] clk: at91: Fix initializing arrays   Francois Berder
• [PATCH] clk: at91: Fix initializing arrays   Eugen Hristev
• [PATCH] clk: fix count parameter type for clk_release_all   Eugen Hristev
• [PATCH] clk: stm32mp1: Add support for USART1 clock   Anatolij Gustschin
• [PATCH] clk: ti: clk-sci: Notify AVS driver based upon clock rate   Udit Kumar
• [PATCH] clk: ti: Notify AVS driver upon setting clock rate   Udit Kumar
• [PATCH] clk: ti: Notify AVS driver upon setting clock rate   Nishanth Menon
• [PATCH] clk: ti: Notify AVS driver upon setting clock rate   Kumar, Udit
• [PATCH] clk: versal: Fix the function versal_clock_ref   Venkatesh Yadav Abbarapu
• [PATCH] clk: versal: Fix the function versal_clock_ref   Michal Simek
• [PATCH] cmd: sf: Fix the flash_is_unlocked api size parameter   Venkatesh Yadav Abbarapu
• [PATCH] cmd: sf: Fix the flash_is_unlocked api size parameter   Michal Simek
• [PATCH] cmd: xxd: move xxd into shell commands   Roger Knecht
• [PATCH] cmd: xxd: move xxd into shell commands   Simon Glass
• [PATCH] common: Drop linux/printk.h from common header   Simon Glass
• [PATCH] common: Drop linux/printk.h from common header   Tom Rini
• [PATCH] common: Drop linux/printk.h from common header   Simon Glass
• [PATCH] common: Drop linux/printk.h from common header   Tom Rini
• [PATCH] common: Drop linux/printk.h from common header   Simon Glass
• [PATCH] common: Drop linux/printk.h from common header   Tom Rini
• [PATCH] common: Drop linux/printk.h from common header   Tom Rini
• [PATCH] config: j7200: removed not needed power config   Udit Kumar
• [PATCH] config: j7200: removed not needed power config   Nishanth Menon
• [PATCH] config: j7200: removed not needed power config   Kumar, Udit
• [PATCH] config: j7200: removed not needed power config   Nishanth Menon
• [PATCH] configs: am65x_evm: Use envboot before distro_bootcmd   Devarsh Thakkar
• [PATCH] configs: am65x_evm: Use envboot before distro_bootcmd   Tom Rini
• [PATCH] configs: am65x_evm_r5_usbmsc_defconfig: Enable DWC3 wrapper for SPL   Ravi Gunasekaran
• [PATCH] configs: am65x_evm_r5_usbmsc_defconfig: Enable DWC3 wrapper for SPL   Tom Rini
• [PATCH] configs: iot2050: Disable CONFIG_CONSOLE_MUX   Jan Kiszka
• [PATCH] configs: iot2050: Disable CONFIG_CONSOLE_MUX   Tom Rini
• [PATCH] configs: j721s2_evm_r5_defconfig: Increase malloc pool size in DRAM   Manorit Chawdhry
• [PATCH] configs: rockchip: rock-pi-s: use default bootdelay (2s)   FUKAUMI Naoki
• [PATCH] configs: sandbox64: Enable legacy image format support   Tom Rini
• [PATCH] configs: stm32f769-disco: Enable VIDEO_LOGO flag   Patrice CHOTARD
• [PATCH] dm: core: ofnode: Fix error message in ofnode_read_bootscript_address/flash()   Michal Simek
• [PATCH] dm: core: ofnode: Fix error message in ofnode_read_bootscript_address/flash()   Michal Simek
• [PATCH] doc: board: ti: Move documentation from README to .rst   Neha Malcom Francis
• [PATCH] doc: delete unused values kernel command line   Jaewon Jung
• [PATCH] doc: delete unused values kernel command line   Simon Glass
• [PATCH] doc: efi: Update for the 64-bit app   Simon Glass
• [PATCH] doc: qemu: switch swtpm instruction to 'tpm autostart'   Heinrich Schuchardt
• [PATCH] doc: qemu: switch swtpm instruction to 'tpm autostart'   Ilias Apalodimas
• [PATCH] doc: usage: load: document part as hexadecimal   Yoann Congal
• [PATCH] doc: usage: load: document part as hexadecimal   Simon Glass
• [PATCH] docs: board: ti: Add j721s2_evm documentation   Manorit Chawdhry
• [PATCH] driver: rng: Add DM_RNG interface for ARMv8.5 RNDR registers   Andre Przywara
• [PATCH] drivers: mediatek: Fix error handling in mtk_i2c_do_transfer   Francois Berder
• [PATCH] drivers: mediatek: Fix error handling in mtk_i2c_do_transfer   Heiko Schocher
• [PATCH] drivers: mediatek: Fix error handling in mtk_i2c_do_transfer   Tom Rini
• [PATCH] drivers: mediatek: Fix error handling in mtk_i2c_do_transfer   Tom Rini
• [PATCH] drivers: misc: k3_avs: Add Linux compatibles to maintain sync   Reid Tonking
• [PATCH] drivers: misc: k3_avs: Add Linux compatibles to maintain sync   Nishanth Menon
• [PATCH] drivers: misc: k3_avs: Add Linux compatibles to maintain sync   Tom Rini
• [PATCH] dt-bindings: mtd: Add a schema for binman   Simon Glass
• [PATCH] dt-bindings: mtd: Add a schema for binman   Rob Herring
• [PATCH] dt-bindings: mtd: Add a schema for binman   Krzysztof Kozlowski
• [PATCH] dt-bindings: mtd: Add a schema for binman   Alper Nebi Yasak
• [PATCH] dt-bindings: mtd: Add a schema for binman   Simon Glass
• [PATCH] dt-bindings: mtd: Add a schema for binman   Simon Glass
• [PATCH] dt-bindings: mtd: Add a schema for binman   Rob Herring
• [PATCH] dt-bindings: mtd: Add a schema for binman   Simon Glass
• [PATCH] dt-bindings: mtd: Add a schema for binman   Rob Herring
• [PATCH] dt-bindings: mtd: Add a schema for binman   Simon Glass
• [PATCH] dt-bindings: mtd: Add a schema for binman   Rob Herring
• [PATCH] dt-bindings: mtd: Add a schema for binman   Simon Glass
• [PATCH] dt-bindings: mtd: Add a schema for binman   Miquel Raynal
• [PATCH] dt-bindings: mtd: Add a schema for binman   Simon Glass
• [PATCH] dt-bindings: mtd: Add a schema for binman   Miquel Raynal
• [PATCH] dt-bindings: mtd: Add a schema for binman   Simon Glass
• [PATCH] dt-bindings: mtd: Add a schema for binman   Miquel Raynal
• [PATCH] dt-bindings: mtd: Add a schema for binman   Simon Glass
• [PATCH] dt-bindings: mtd: Add a schema for binman   Rob Herring
• [PATCH] dt-bindings: mtd: Add a schema for binman   Simon Glass
• [PATCH] dt-bindings: mtd: Add a schema for binman   Miquel Raynal
• [PATCH] dt-bindings: mtd: Add a schema for binman   Rob Herring
• [PATCH] dt-bindings: mtd: Add a schema for binman   Simon Glass
• [PATCH] dt-bindings: mtd: Add a schema for binman   Simon Glass
• [PATCH] eeprom: starfive: set eth0 mac address properly   Leo Liang
• [PATCH] env: Improve ENV_OFFSET help message   Paul Barker
• [PATCH] env: Improve ENV_OFFSET help message   Simon Glass
• [PATCH] env: Improve ENV_OFFSET help message   Paul Barker
• [PATCH] env: ti: ti_common.env: Fix get_overlaystring for FIT Image   Manorit Chawdhry
• [PATCH] env: ti: ti_common.env: Fix get_overlaystring for FIT Image   Manorit Chawdhry
• [PATCH] event.h: Documented some newly added portions better   Tom Rini
• [PATCH] event.h: Documented some newly added portions better   Tom Rini
• [PATCH] expo: Fix documentation reference   Massimo Pegorer
• [PATCH] expo: Fix documentation reference   Simon Glass
• [PATCH] fastboot: fix CRC32 chunk size checking   Wojciech Nizinski
• [PATCH] global: Use proper project name U-Boot (next2)   Michal Simek
• [PATCH] global: Use proper project name U-Boot (next2)   Simon Glass
• [PATCH] global: Use proper project name U-Boot (next2)   Michal Simek
• [PATCH] global: Use proper project name U-Boot (next2)   Alexander Graf
• [PATCH] imx7: Disable CAAM Job Ring 0   Fabio Estevam
• [PATCH] imx7: Disable CAAM Job Ring 0   sbabic at denx.de
• [PATCH] imx8mp: binman: rename spl and u-boot nodes   Rasmus Villemoes
• [PATCH] imx8mp: binman: rename spl and u-boot nodes   Marek Vasut
• [PATCH] imx8mp: binman: rename spl and u-boot nodes   Fabio Estevam
• [PATCH] include: env: ti: mmc: Add 'ti' directory prefix for overlays   Ravi Gunasekaran
• [PATCH] include: env: ti: mmc: Add 'ti' directory prefix for overlays   Nishanth Menon
• [PATCH] include: env: ti: mmc: Add 'ti' directory prefix for overlays   Ravi Gunasekaran
• [PATCH] J721S2 DTS Sync from v6.6-rc1 to u-boot   Manorit Chawdhry
• [PATCH] J721S2 DTS Sync from v6.6-rc1 to u-boot   Nishanth Menon
• [PATCH] J721S2 DTS Sync from v6.6-rc1 to u-boot   Manorit Chawdhry
• [PATCH] J721S2 DTS Sync from v6.6-rc1 to u-boot   Nishanth Menon
• [PATCH] J721S2 DTS Sync from v6.6-rc1 to u-boot   Konstantin Ryabitsev
• [PATCH] J721S2 DTS Sync from v6.6-rc1 to u-boot   Manorit Chawdhry
• [PATCH] k3-am68: Sync from Linux tag v6.6-rc1   Manorit Chawdhry
• [PATCH] k3-j721s2: Sync from Linux tag v6.6-rc1   Manorit Chawdhry
• [PATCH] linker_list: Fix ll_entry_get alignment   Sean Anderson
• [PATCH] linker_list: Fix ll_entry_get alignment   Sean Anderson
• [PATCH] linux/compat.h: Define empty __initconst and __initdata   Marek Vasut
• [PATCH] linux/compat.h: Define empty __initconst and __initdata   Tom Rini
• [PATCH] lmb: remove overlapping region with next range   Udit Kumar
• [PATCH] lmb: remove overlapping region with next range   Heinrich Schuchardt
• [PATCH] lmb: remove overlapping region with next range   Kumar, Udit
• [PATCH] lmb: remove overlapping region with next range   Tom Rini
• [PATCH] lmb: remove overlapping region with next range   Mark Kettenis
• [PATCH] lmb: remove overlapping region with next range   Tom Rini
• [PATCH] lmb: remove overlapping region with next range   Simon Glass
• [PATCH] lmb: remove overlapping region with next range   Kumar, Udit
• [PATCH] lmb: remove overlapping region with next range   Kumar, Udit
• [PATCH] mailbox: k3-sec-proxy: fix error handling for missing scfg in FDT   Matthias Schiffer
• [PATCH] mailbox: k3-sec-proxy: fix error handling for missing scfg in FDT   Nishanth Menon
• [PATCH] MAINTAINERS: Step up as maintainers of UniPhier SoC platform   Kunihiko Hayashi
• [PATCH] MAINTAINERS: Step up as maintainers of UniPhier SoC platform   Tom Rini
• [PATCH] MAINTAINERS: ufs: Change Bhupesh's email address   Bhupesh Sharma
• [PATCH] MAINTAINERS: ufs: Change Bhupesh's email address   Marek Vasut
• [PATCH] MAINTAINERS: ufs: Change Bhupesh's email address   bhupesh.linux at gmail.com
• [PATCH] Makefile: Force regeneration of env.txt   Andrew Davis
• [PATCH] Makefile: Force regeneration of env.txt   Andrew Davis
• [PATCH] Makefile: Force regeneration of env.txt   Simon Glass
• [PATCH] Makefile: Force regeneration of env.txt   Andrew Davis
• [PATCH] misc: fs_loader: Fix alignment of fs_loader driver   Sean Anderson
• [PATCH] misc: i2c_eeprom: consider pagesize when writing to eeprom   Michel Alex
• [PATCH] mkimage: allow internalization of data-position   Lars Feyaerts
• [PATCH] mmc: Add SPL_MMC_PWRSEQ to fix link issue when building SPL   Jonas Karlman
• [PATCH] mmc: Add SPL_MMC_PWRSEQ to fix link issue when building SPL   Kever Yang
• [PATCH] mmc: Add SPL_MMC_PWRSEQ to fix link issue when building SPL   Neil Armstrong
• [PATCH] mmc: Add SPL_MMC_PWRSEQ to fix link issue when building SPL   Ferass El Hafidi
• [PATCH] mx8m: csf.sh: pad csf blob for u-boot.itb to CSF_SIZE minus IVT header   Rasmus Villemoes
• [PATCH] mx8m: csf.sh: pad csf blob for u-boot.itb to CSF_SIZE minus IVT header   Marek Vasut
• [PATCH] mx8m: csf.sh: pad csf blob for u-boot.itb to CSF_SIZE minus IVT header   Rasmus Villemoes
• [PATCH] mx8m: csf.sh: pad csf blob for u-boot.itb to CSF_SIZE minus IVT header   Marek Vasut
• [PATCH] net: eth-uclass: Setup ROM source only when ROM reading passes   Michal Simek
• [PATCH] net: phy: motorcomm: Add support for YT8511 PHY   Tom Rini
• [PATCH] net: phy: xilinx-gmii2rgmii: Removed hardcoded phy address 0 for bridge   Tejas Bhumkar
• [PATCH] net: phy: xilinx-gmii2rgmii: Removed hardcoded phy address 0 for bridge   Michal Simek
• [PATCH] net: wget: Avoid packet queue overflow   Richard Weinberger
• [PATCH] net: wget: Avoid packet queue overflow   Tom Rini
• [PATCH] net: zynq_gem: Update the MDC clock divisor in the probe function   Venkatesh Yadav Abbarapu
• [PATCH] net: zynq_gem: Update the MDC clock divisor in the probe function   Michal Simek
• [PATCH] patman: Respect include directive on Git config lookup   Fei Shao
• [PATCH] patman: Respect include directive on Git config lookup   Simon Glass
• [PATCH] patman: Respect include directive on Git config lookup   Simon Glass
• [PATCH] pico-imx7d: Remove Vanessa from MAINTAINERS   Fabio Estevam
• [PATCH] pico-imx7d: Remove Vanessa from MAINTAINERS   Tom Rini
• [PATCH] pinctrl: Check pinconfig nodes pre-reloc status recursively   Massimo Pegorer
• [PATCH] pinctrl: Increase size of pinmux status buffer   Venkatesh Yadav Abbarapu
• [PATCH] pinctrl: zynqmp: Display the tristate configuration for all pins   Venkatesh Yadav Abbarapu
• [PATCH] pinctrl: zynqmp: Display the tristate configuration for all pins   Michal Simek
• [PATCH] power: mp5416: Fix LDO SVAL for MP5416 PMIC   Sidharth Prabukumar
• [PATCH] Revert "arm: dts: k3-j7*: ddr: Update to 0.10 version of DDR config tool"   Manorit Chawdhry
• [PATCH] Revert "clk: versal: Enable clock driver for Versal NET"   Michal Simek
• [PATCH] Revert "fs: ext4: check the minimal partition size to mount"   Sean Anderson
• [PATCH] RFT: mips: implement __udivdi3   Linus Walleij
• [PATCH] RFT: mips: implement __udivdi3   Daniel Schwierzeck
• [PATCH] RFT: mips: implement __udivdi3   Linus Walleij
• [PATCH] riscv: andesv5: Prefer using the generic RISC-V timer driver in S-mode   Yu Chien Peter Lin
• [PATCH] riscv: andesv5: Prefer using the generic RISC-V timer driver in S-mode   Samuel Holland
• [PATCH] riscv: andesv5: Prefer using the generic RISC-V timer driver in S-mode   Yu-Chien Peter Lin
• [PATCH] riscv: enable multi-range memory layout   Fei Wu
• [PATCH] riscv: enable multi-range memory layout   Wu, Fei
• [PATCH] riscv: enable multi-range memory layout   Heinrich Schuchardt
• [PATCH] riscv: enable multi-range memory layout   Wu, Fei
• [PATCH] rockchip: rk3399: nanopc-t4: use 1600MHz sdram config   Lu jicong
• [PATCH] rpi: Use OF_BOARD rather than OF_EMBED   Simon Glass
• [PATCH] sandbox: test: Fix typo in test.dts   Michal Simek
• [PATCH] sandbox: test: Fix typo in test.dts   Ilias Apalodimas
• [PATCH] sandbox: test: Fix typo in test.dts   Simon Glass
• [PATCH] scripts/Makefile.lib: also consider $(CONFIG_SYS_BOARD)-u-boot.dtsi   Rasmus Villemoes
• [PATCH] scripts/Makefile.lib: also consider $(CONFIG_SYS_BOARD)-u-boot.dtsi   Tom Rini
• [PATCH] scripts/Makefile.lib: also consider $(CONFIG_SYS_BOARD)-u-boot.dtsi   Rasmus Villemoes
• [PATCH] scripts/Makefile.lib: also consider $(CONFIG_SYS_BOARD)-u-boot.dtsi   Simon Glass
• [PATCH] scripts/Makefile.lib: also consider $(CONFIG_SYS_BOARD)-u-boot.dtsi   Tom Rini
• [PATCH] smegw01: Fix inverted CONFIG_SYS_BOOT_LOCKED logic   Fabio Estevam
• [PATCH] smegw01: Fix inverted CONFIG_SYS_BOOT_LOCKED logic   Tom Rini
• [PATCH] smegw01: Fix inverted CONFIG_SYS_BOOT_LOCKED logic   Tom Rini
• [PATCH] smegw01: Use CONFIG_SYS_LOAD_ADDR for loading fitImage   Fabio Estevam
• [PATCH] smegw01: Use CONFIG_SYS_LOAD_ADDR for loading fitImage   sbabic at denx.de
• [PATCH] spi: nxp_fspi: reset the FLSHxCR1 registers   Han Xu
• [PATCH] spi: zynqmp_qspi: Change flush cache to invalidate cache   Venkatesh Yadav Abbarapu
• [PATCH] spi: zynqmp_qspi: Workaround for small data cache issue   Venkatesh Yadav Abbarapu
• [PATCH] spi: zynqmp_qspi: Workaround for small data cache issue   Michal Simek
• [PATCH] spi: zynqmp_qspi: Workaround for small data cache issue   Abbarapu, Venkatesh
• [PATCH] spl: add __noreturn attribute to spl_invoke_atf function   Chanho Park
• [PATCH] spl: add __noreturn attribute to spl_invoke_opensbi function   Leo Liang
• [PATCH] spl: Jump to image at end of board_init_r   Jonas Karlman
• [PATCH] spl: Jump to image at end of board_init_r   Simon Glass
• [PATCH] spl: Jump to image at end of board_init_r   Heinrich Schuchardt
• [PATCH] spl: Jump to image at end of board_init_r   Ferass El Hafidi
• [PATCH] spl: Jump to image at end of board_init_r   Ferass El Hafidi
• [PATCH] spl: Jump to image at end of board_init_r   Heinrich Schuchardt
• [PATCH] spl: Jump to image at end of board_init_r   Ferass El Hafidi
• [PATCH] spl: Jump to image at end of board_init_r   Tom Rini
• [PATCH] spl: Jump to image at end of board_init_r   Heinrich Schuchardt
• [PATCH] spl: Jump to image at end of board_init_r   Tom Rini
• [PATCH] sunxi: board: provide CPU idle states to loaded OS   Andrey Skvortsov
• [PATCH] sunxi: board: provide CPU idle states to loaded OS   Andre Przywara
• [PATCH] sunxi: board: provide CPU idle states to loaded OS   Andrey Skvortsov
• [PATCH] sunxi: board: provide CPU idle states to loaded OS   Andre Przywara
• [PATCH] sunxi: board: provide CPU idle states to loaded OS   Andrey Skvortsov
• [PATCH] sunxi: board: provide CPU idle states to loaded OS   Andre Przywara
• [PATCH] sunxi: board: provide CPU idle states to loaded OS   Andrey Skvortsov
• [PATCH] sunxi: R528: add SMHC2 pin pull ups support   Okhunjon Sobirjonov
• [PATCH] sunxi: R528: add SMHC2 pin pull ups support   Okhunjon Sobirjonov
• [PATCH] sunxi: R528: add SMHC2 pin pull ups support   Andre Przywara
• [PATCH] test/py: sleep: Add a test for the time command   Love Kumar
• [PATCH] test/py: sleep: Add a test for the time command   Tom Rini
• [PATCH] test/py: tpm2: skip tpm2_startup when env__tpm_device_test_skip=True   Michal Simek
• [PATCH] test/py: tpm2: skip tpm2_startup when env__tpm_device_test_skip=True   Ilias Apalodimas
• [PATCH] test/py: tpm2: skip tpm2_startup when env__tpm_device_test_skip=True   Michal Simek
• [PATCH] test/py: tpm2: skip tpm2_startup when env__tpm_device_test_skip=True   Ilias Apalodimas
• [PATCH] test: dm: test-fdt: Use fdtdec_get_int() in dm_check_devices()   Tom Rini
• [PATCH] test: Fix SPL tests not being run   Sean Anderson
• [PATCH] test: Fix SPL tests not being run   Sean Anderson
• [PATCH] timer: starfive: Add Starfive timer support   Kuan Lim Lee
• [PATCH] tools: Fix patman launcher script.   Maxim Cournoyer
• [PATCH] tools: Fix patman launcher script.   Simon Glass
• [PATCH] tools: Fix patman launcher script.   Simon Glass
• [PATCH] tools: iot2050-sign-fw.sh: Make localization of tools dir more robust   Jan Kiszka
• [PATCH] tools: logos: Rename TI logo files   Nikhil M Jain
• [PATCH] tools: logos: Rename TI logo files   Devarsh Thakkar
• [PATCH] tools: logos: Rename TI logo files   Tom Rini
• [PATCH] tpm: Fix autostart for TPM1.2 devices   Ilias Apalodimas
• [PATCH] tpm: Fix autostart for TPM1.2 devices   Heinrich Schuchardt
• [PATCH] tpm: Fix autostart for TPM1.2 devices   Simon Glass
• [PATCH] ufs: ufs-renesas: Add support for Renesas R-Car UFS controller   Tom Rini
• [PATCH] ufs: ufs-renesas: Drop include common.h   Marek Vasut
• [PATCH] ufs: ufs-renesas: Drop include common.h   Tom Rini
• [PATCH] ufs: ufs-renesas: Drop include common.h   Bhupesh Sharma
• [PATCH] usb: dwc3: core: add external vBus supply support for ulpi phy   Venkatesh Yadav Abbarapu
• [PATCH] usb: dwc3: core: add external vBus supply support for ulpi phy   Marek Vasut
• [PATCH] USB: gadget: atmel: fix transfer of queued requests   Artur Rojek
• [PATCH] USB: gadget: atmel: fix transfer of queued requests   Marek Vasut
• [PATCH] usb: gadget: sdp: Option to enable SDP read register command   Loic Poulain
• [PATCH] usb: gadget: sdp: Option to enable SDP read register command   Marek Vasut
• [PATCH] usb: host: ehci-generic: check for companion controller   Fabrice Gasnier
• [PATCH] usb: host: ehci-generic: check for companion controller   Marek Vasut
• [PATCH] usb: host: ohci-generic: Make usage of clock/reset bulk() API   Fabrice Gasnier
• [PATCH] usb: host: ohci-generic: Make usage of clock/reset bulk() API   Marek Vasut
• [PATCH] usb: host: ohci-generic: Make usage of clock/reset bulk() API   Xavier Drudis Ferran
• [PATCH] usb: host: ohci-generic: Make usage of clock/reset bulk() API   Fabrice Gasnier
• [PATCH] usb: host: ohci-generic: Make usage of clock/reset bulk() API   Xavier Drudis Ferran
• [PATCH] usb: xhci: Workaround to fix the USB halted endpoint issues   Venkatesh Yadav Abbarapu
• [PATCH] usbarmory: Add DM_I2C and DM_SERIAL support   Andrej Rosano
• [PATCH] verdin-imx8mp: drop unused tdx easy installer ifdef   Hiago De Franco
• [PATCH] verdin-imx8mp: drop unused tdx easy installer ifdef   Marcel Ziswiler
• [PATCH] verdin-imx8mp: drop unused tdx easy installer ifdef   Fabio Estevam
• [PATCH] video: Add parentheses around VNBYTES() macro   Simon Glass
• [PATCH] video: Add parentheses around VNBYTES() macro   Tom Rini
• [PATCH] x86: doc: Document the -cdrom issues I ran into   Simon Glass
• [PATCH] x86: doc: Document the -cdrom issues I ran into   Bin Meng
• [PATCH resend 0/2] imx: spl_imx_romapi: simplify stream loading   Rasmus Villemoes
• [PATCH RESEND 1/2] arm: dts: rockchip: rk3588, rk3588s: sync with Linux   FUKAUMI Naoki
• [PATCH RESEND 1/2] arm: dts: rockchip: rk3588, rk3588s: sync with Linux   Jonas Karlman
• [PATCH resend 1/2] imx: spl_imx_romapi: avoid tricky use of spl_load_simple_fit() to get full FIT size   Rasmus Villemoes
• [PATCH resend 1/2] imx: spl_imx_romapi: avoid tricky use of spl_load_simple_fit() to get full FIT size   Fabio Estevam
• [PATCH RESEND 2/2] arm: dts: rockchip: rock-5b: add support for PCIe3 and NVMe   FUKAUMI Naoki
• [PATCH resend 2/2] imx: spl_imx_romapi.c: remove dead code   Rasmus Villemoes
• [PATCH resend 2/2] imx: spl_imx_romapi.c: remove dead code   Fabio Estevam
• [PATCH RESEND] sunxi: add axp313a support   Andre Przywara
• [PATCH RFC 0/2] board: visionfive2: Select fdtfile based on revision   Jami Kettunen
• Re: [PATCH RFC 0/2] board: visionfive2: Select fdtfile based on revision   Shengyu Qu
• [PATCH RFC 0/2] board: visionfive2: Select fdtfile based on revision   Shengyu Qu
• [PATCH RFC 1/2] board: visionfive2: Select fdtfile based on revision   Jami Kettunen
• [PATCH RFC 1/2] board: visionfive2: Select fdtfile based on revision   Milan P. Stanić
• [PATCH RFC 2/2] configs: visionfive2: Enable MISC_INIT_R   Jami Kettunen
• [PATCH RFC 2/2] configs: visionfive2: Enable MISC_INIT_R   Milan P. Stanić
• [PATCH v1 0/2] Fix memory size problem on Visionfive 2   Shengyu Qu
• [PATCH v1 0/2] SPL EBBR - EFI System Partition support   Mayuresh Chitale
• [PATCH v1 0/2] SPL EBBR - EFI System Partition support   Heinrich Schuchardt
• [PATCH v1 0/2] SPL EBBR - EFI System Partition support   Sean Anderson
• [PATCH v1 0/3] arm: NPCM: fix npcm bmc error   Jim Liu
• [PATCH v1 0/6] stm32mp: DT and config update   Patrice Chotard
• [PATCHv10 00/15] net/lwip: add lwip library for the network stack   Maxim Uvarov
• [PATCHv10 01/15] submodule: add lwIP as git submodule   Maxim Uvarov
• [PATCHv10 01/15] submodule: add lwIP as git submodule   Simon Glass
• [PATCHv10 01/15] submodule: add lwIP as git submodule   Tom Rini
• [PATCHv10 01/15] submodule: add lwIP as git submodule   Simon Glass
• [PATCHv10 01/15] submodule: add lwIP as git submodule   Tom Rini
• [PATCHv10 02/15] Makefile: init submodules   Maxim Uvarov
• [PATCHv10 03/15] net/lwip: add doc/develop/net_lwip.rst   Maxim Uvarov
• [PATCHv10 04/15] net/lwip: integrate lwIP library   Maxim Uvarov
• [PATCHv10 05/15] net/lwip: implement dns cmd   Maxim Uvarov
• [PATCHv10 06/15] net/lwip: implement dhcp cmd   Maxim Uvarov
• [PATCHv10 07/15] net/lwip: implement tftp cmd   Maxim Uvarov
• [PATCHv10 08/15] net/lwip: implement wget cmd   Maxim Uvarov
• [PATCHv10 09/15] net/lwip: implement ping cmd   Maxim Uvarov
• [PATCHv10 10/15] net/lwip: add lwIP configuration   Maxim Uvarov
• [PATCHv10 11/15] net/lwip: implement lwIP port to U-Boot   Maxim Uvarov
• [PATCHv10 12/15] net/lwip: update .gitignore with lwIP   Maxim Uvarov
• [PATCHv10 13/15] net/lwip: connection between cmd and lwip apps   Maxim Uvarov
• [PATCHv10 14/15] net/lwip: replace original net commands with lwip   Maxim Uvarov
• [PATCHv10 15/15] net/lwip: split net.h to net.h, arp.h and eth.h   Maxim Uvarov
• [PATCH v10 3/4] Boot var automatic management for removable medias   Masahisa Kojima
• [PATCH v1 1/1] drivers/mtd/spi/spi-nor-ids.c: add mx25u25635f support   Michal Simek
• [PATCH v1 1/2] configs: starfive: Enable PCIE auto enum and NVME/USB stuff for Starfive Visionfive 2   Dennis Gilmore
• [PATCH v1 1/2] configs: visionfive2: Enable CONFIG_OF_BOARD_SETUP   Shengyu Qu
• [PATCH v1 1/2] meson-a1: dts: add hw rng node   Alexey Romanov
• [PATCH v1 1/2] part: Add a function to find ESP partition   Mayuresh Chitale
• [PATCH v1 1/2] part: Add a function to find ESP partition   Tom Rini
• [PATCH v1 1/2] part: Add a function to find ESP partition   mchitale at ventanamicro.com
• [PATCH v1 1/2] TO BE FOLDED: x86: tangier: Add FADT to the chain   Bin Meng
• [PATCH v1 1/2] TO BE FOLDED: x86: tangier: Add FADT to the chain   Bin Meng
• [PATCH v1 1/2] TO BE FOLDED: x86: tangier: Add FADT to the chain   Simon Glass
• [PATCH v1 1/2] verdin-am62: add u-boot update wrappers   Tom Rini
• [PATCH v1 1/3] mtd: nand: raw: rockchip_nfc: add NAND_SKIP_BBTSCAN option   Kever Yang
• [PATCH v1 1/3] pinctrl: npcm8xx: add name for gpio function   Jim Liu
• [PATCH v1 1/6] ARM: dts: stm32mp: alignment with v6.6-rc1   Patrice Chotard
• [PATCH v11] Boot var automatic management for removable medias   Masahisa Kojima
• [PATCH v11] Boot var automatic management for removable medias   Raymond Mao
• [PATCH v11] Boot var automatic management for removable medias   Ilias Apalodimas
• [PATCH v11] Boot var automatic management for removable medias   Masahisa Kojima
• [PATCH v1 2/2] board: verdin-am62: fix check for minimum memory size   Tom Rini
• [PATCH v1 2/2] board: visionfive2: Fixup memory size passed to kernel   Shengyu Qu
• [PATCH v1 2/2] doc: board: starfive: Add more info about supported driver   Dennis Gilmore
• [PATCH v1 2/2] doc: board: starfive: Add more info about supported driver   Heinrich Schuchardt
• [PATCH v1 2/2] meson-a1: dts: add ao secure node   Alexey Romanov
• [PATCH v1 2/2] spl: Add support for booting from ESP   Mayuresh Chitale
• [PATCH v1 2/2] spl: Add support for booting from ESP   Tom Rini
• [PATCH v1 2/2] spl: Add support for booting from ESP   mchitale at ventanamicro.com
• [PATCH v1 2/2] spl: Add support for booting from ESP   Tom Rini
• [PATCH v1 2/3] arm: NPCM: modify baud rate table and dram setting   Jim Liu
• [PATCH v1 2/3] dm: prepare rkmtd UCLASS   Kever Yang
• [PATCH v1 2/6] ARM: dts: stm32: force b-session-valid for otg on stm32mp135f-dk board   Patrice Chotard
• [PATCH v12] Boot var automatic management for removable medias   Masahisa Kojima
• [PATCH v1 3/3] arm: npcm8xx: support dcache off   Jim Liu
• [PATCH v1 3/3] arm: npcm8xx: support dcache off   Tom Rini
• [PATCH v1 3/3] arm: npcm8xx: support dcache off   Jim Liu
• [PATCH v1 3/3] arm: npcm8xx: support dcache off   Tom Rini
• [PATCH v1 3/3] arm: npcm8xx: support dcache off   Jim Liu
• [PATCH v1 3/3] arm: npcm8xx: support dcache off   Tom Rini
• [PATCH v1 3/3] rockchip: cmd: add rockmtd command   Kever Yang
• [PATCH v1 3/6] configs: stm32mp13: Enable USB related flags   Patrice Chotard
• [PATCH v1 4/6] configs: stm32mp13: activate command stm32prog   Patrice Chotard
• [PATCH v1 5/6] configs: stm32mp13: add support of usb boot   Patrice Chotard
• [PATCH v1 6/6] board: st: common: cleanup dfu support   Patrice Chotard
• [PATCH v1] board: toradex: verdin-imx8mm: set fixed LPDDR4 refresh rate as per errata ERR050805   Andrejs Cainikovs
• [PATCH v1] board: toradex: verdin-imx8mm: set fixed LPDDR4 refresh rate as per errata ERR050805   Marcel Ziswiler
• [PATCH v1] CI: Add jsonschema python module   Tom Rini
• [PATCH v1] CI: allow jobs to be run in merge requests   Andrejs Cainikovs
• [PATCH v1] CI: allow jobs to be run in merge requests   Tom Rini
• [PATCH v1] CI: allow jobs to be run in merge requests   Andrejs Cainikovs
• [PATCH v1] clk: mux: check value returned from clk_mux_val_to_index()   Maksim Kiselev
• [PATCH v1] clk: use private clk struct in CLK_CCF's enable/disable functions   Maksim Kiselev
• [PATCH v1] configs: imxrt1050-evk: enable distro bootcmd   Jesse Taube
• [PATCH v1] configs: imxrt1050-evk: enable distro bootcmd   Tom Rini
• [PATCH v1] doc: Update path to source_file_format.rst   Joao Marcos Costa
• [PATCH v1] doc: Update path to source_file_format.rst   Heinrich Schuchardt
• [PATCH v1] doc: Update path to source_file_format.rst   Simon Glass
• [PATCH v1] fs: Fix SPL build if FS_LOADER is enabled   Mayuresh Chitale
• [PATCH v1] fs: Fix SPL build if FS_LOADER is enabled   Tom Rini
• [PATCH v1] fs: Fix SPL build if FS_LOADER is enabled   mchitale at ventanamicro.com
• [PATCH v1] i2c: nuvoton: add support fast mode   Jim Liu
• [PATCH v1] include: configs: verdin-am62: drop unused sdram address   Tom Rini
• [PATCH v1] rockchip: include: asm: fix entering download mode rk3066   Johan Jonker
• [PATCH v1] rockchip: include: asm: fix entering download mode rk3066   Johan Jonker
• [PATCH v1] rockchip: include: asm: fix entering download mode rk3066   Kever Yang
• [PATCH v1] spi: spi-nor-ids: add flash model w25q01/02 support   Jim Liu
• [PATCH v1] wdt: nuvoton: fix reset/expire function error and add dts   Jim Liu
• [PATCH v1] wdt: nuvoton: fix reset/expire function error and add dts   Stefan Roese
• [PATCH v1] wdt: nuvoton: fix reset/expire function error and add dts   Jim Liu
• [PATCH v2 0/1] mtd: nand: raw: atmel: R/B gpio on sam9x60   Alexander Dahl
• [PATCH v2 0/2] clk: amlogic: a1: Add Amlogic A1 clock driver   Igor Prusov
• [PATCH v2 0/2] clk: amlogic: a1: Add Amlogic A1 clock driver   Neil Armstrong
• [PATCH v2 0/2] clk: amlogic: a1: Add Amlogic A1 clock driver   Neil Armstrong
• [PATCH v2 0/2] Enable split mode in binman   Neha Malcom Francis
• [PATCH v2 0/2] Fix dependencies of USB Kconfig options   Venkatesh Yadav Abbarapu
• [PATCH v2 0/2] Fix dependencies of USB Kconfig options   Michal Simek
• [PATCH v2 0/2] Fix dependencies of USB Kconfig options   Michal Simek
• [PATCH v2 0/2] Fix issues for small sized data reads   Venkatesh Yadav Abbarapu
• [PATCH v2 0/2] Fix issues for small sized data reads   Michal Simek
• [PATCH v2 0/2] lmb: remove overlapping region with next range   Udit Kumar
• [PATCH v2 0/2] risc-v: implement DBCN based debug console   Heinrich Schuchardt
• [PATCH v2 0/2] risc-v: implement DBCN based debug console   Chanho Park
• [PATCH v2 0/2] riscv: starfive: generate u-boot-spl.bin.normal.out   Heinrich Schuchardt
• [PATCH v2 0/2] rockchip: Use an external TPL binary on RK3308   Massimo Pegorer
• [PATCH v2 0/3] Add rkmtd command   Johan Jonker
• [PATCH V2 0/3] andes: rearrange defconfig and dts   Randolph
• [PATCH v2 0/3] arm64: versal: Enable CMD_KASLR and TPM   Michal Simek
• [PATCH v2 0/3] Conclusive KSTR-SAMA5D27 support   Artur Rojek
• [PATCH v2 0/3] enable power and clock Kconfig conditionally   Udit Kumar
• [PATCH v2 0/3] phy: Fix generic_setup_phy return value on power on failure   Jonas Karlman
• [PATCH v2 0/3] trace: Fix flyrecord alignment issue   Michal Simek
• [PATCH v2 0/3] trace: Fix flyrecord alignment issue   Michal Simek
• [PATCH v2 0/4] armv8: fsl-layerscape: add support for MC reserved memory   Laurentiu Tudor
• [PATCH v2 0/4] Attempt to collect standard extensions for build output   Simon Glass
• [PATCH v2 0/4] cmd: gpt: fix gpt read   Heinrich Schuchardt
• [PATCH v2 0/4] Resolve issues with booting distros on x86   Simon Glass
• [PATCH v2 0/6] Add EFI HTTP boot support   Masahisa Kojima
• [PATCH v2 0/6] Port gen_compile_commands.py from Linux to U-Boot   Joao Marcos Costa
• [PATCH v2 0/7] J721E DTS Sync with Kernel v6.5-rc1   Neha Malcom Francis
• [PATCH v2 0/7] rng: stm32: support STM32MP13x platforms   Gatien Chevallier
• [PATCH v2 0/7] rockchip: rk3568: Fix use of PCIe bifurcation   Jonas Karlman
• [PATCH v2 0/7] rockchip: rk3568: Fix use of PCIe bifurcation   Kever Yang
• [PATCH v2 0/7] rockchip: rk3568: Fix use of PCIe bifurcation   Jonas Karlman
• [PATCH v2 0/8] Add SM uclass and Meson SM driver   Alexey Romanov
• [PATCH v2 0/9] x86: Fixes for chromebook_link64 and chromebook_samus_tpl   Simon Glass
• [PATCH v2 0/9] x86: Fixes for chromebook_link64 and chromebook_samus_tpl   Bin Meng
• [PATCH v2 00/10] rockchip: rk3588: add support for DFU in SPL   Eugen Hristev
• [PATCH v2 00/10] rockchip: rk3588: add support for DFU in SPL   Kever Yang
• [PATCH v2 00/10] rockchip: rk3588: add support for DFU in SPL   Eugen Hristev
• [PATCH v2 00/14] Correct confusing lmb error message   Simon Glass
• [PATCH v2 00/22] sunxi: Allwinner T113s support   Andre Przywara
• [PATCH v2 00/27] moveconfig: Drop old code and tidy up   Simon Glass
• [PATCH v2 00/32] spl: Preparation for Universal Payload   Simon Glass
• [PATCH v2 01/14] lmb: Drop surplus brackets and fix code style   Simon Glass
• [PATCH v2 01/17] dm: usb: udc: Factor out plain udevice handler functions   Marek Vasut
• [PATCH v2 01/17] dm: usb: udc: Factor out plain udevice handler functions   Miquel Raynal
• [PATCH v2 01/17] dm: usb: udc: Factor out plain udevice handler functions   Miquel Raynal
• [PATCH v2 01/17] dm: usb: udc: Factor out plain udevice handler functions   Marek Vasut
• [PATCH v2 01/22] sunxi: remove CONFIG_SATAPWR   Andre Przywara
• [PATCH v2 01/27] moveconfig: Drop -H option   Simon Glass
• [PATCH v2 01/32] dm: core: support reading a single indexed u64 value   Simon Glass
• [PATCH v2 02/14] lmb: Rename interior piece to area   Simon Glass
• [PATCH v2 02/14] lmb: Rename interior piece to area   Heinrich Schuchardt
• [PATCH v2 02/14] lmb: Rename interior piece to area   Simon Glass
• [PATCH v2 02/14] lmb: Rename interior piece to area   Simon Glass
• [PATCH v2 02/17] usb: sandbox: Add DM_USB_GADGET support   Marek Vasut
• [PATCH v2 02/22] net: sunxi_emac: chase DT nodes to find PHY regulator   Andre Przywara
• [PATCH v2 02/27] moveconfig: Avoid deprecation warning for setDaemon   Simon Glass
• [PATCH v2 02/32] spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_...   Simon Glass
• [PATCH v2 03/14] lmb: Rename region array to area   Simon Glass
• [PATCH v2 03/17] configs: sandbox: Enable DM_USB_GADGET   Marek Vasut
• [PATCH v2 03/22] sunxi: remove CONFIG_MACPWR   Andre Przywara
• [PATCH v2 03/27] moveconfig: Correct ordering of asteval import   Simon Glass
• [PATCH v2 03/32] spl: Rename SYS_SPL_ARGS_ADDR to SPL_PAYLOAD_ARGS_ADDR   Simon Glass
• [PATCH v2 04/14] lmb: Rename memory/reserved_regions to area   Simon Glass
• [PATCH v2 04/17] cmd: fastboot: Use plain udevice for UDC controller interaction   Marek Vasut
• [PATCH v2 04/22] pinctrl: sunxi: move pinctrl code   Andre Przywara
• [PATCH v2 04/27] moveconfig: Drop unused cleanup options   Simon Glass
• [PATCH v2 04/32] spl: Avoid #ifdef with CONFIG_SPL_SYS_MALLOC   Simon Glass
• [PATCH v2 05/14] lmb: Rename LMB_MAX_REGIONS and LMB_USE_MAX_REGIONS   Simon Glass
• [PATCH v2 05/17] cmd: rockusb: Use plain udevice for UDC controller interaction   Marek Vasut
• [PATCH v2 05/17] cmd: rockusb: Use plain udevice for UDC controller interaction   Mattijs Korpershoek
• [PATCH v2 05/22] pinctrl: sunxi: add GPIO in/out wrappers   Andre Przywara
• [PATCH v2 05/27] moveconfig: Drop CONFIG-moving code   Simon Glass
• [PATCH v2 05/32] spl: mx6: powerpc: Drop the condition on timer_init()   Simon Glass
• [PATCH v2 06/14] lmb: Rename LMB_MAX_REGIONS and LMB_USE_MAX_REGIONS   Simon Glass
• [PATCH v2 06/17] cmd: sdp: Reorder variable declaration   Marek Vasut
• [PATCH v2 06/22] pinctrl: sunxi: remove struct sunxi_gpio   Andre Przywara
• [PATCH v2 06/27] moveconfig: Drop check_defconfig() and update_dotconfig()   Simon Glass
• [PATCH v2 06/32] spl: Drop #ifdefs for BOARD_INIT and watchdog   Simon Glass
• [PATCH v2 07/14] lmb: Update use of region in the header file   Simon Glass
• [PATCH v2 07/17] cmd: thordown: Reorder variable declaration   Marek Vasut
• [PATCH v2 07/17] cmd: thordown: Reorder variable declaration   Mattijs Korpershoek
• [PATCH v2 07/22] pinctrl: sunxi: remove GPIO_EXTRA_HEADER   Andre Przywara
• [PATCH v2 07/27] moveconfig: Drop suspicious boards   Simon Glass
• [PATCH v2 07/32] spl: Avoid #ifdef with CONFIG_SPL_PAYLOAD_ARGS_ADDR   Simon Glass
• [PATCH v2 08/14] lmb: Update use of region in the C file   Simon Glass
• [PATCH v2 08/17] cmd: ums: Use plain udevice for UDC controller interaction   Marek Vasut
• [PATCH v2 08/22] pinctrl: sunxi: move PIO_BASE into sunxi_gpio.h   Andre Przywara
• [PATCH v2 08/27] moveconfig: Correct some regular-expression strings   Simon Glass
• [PATCH v2 08/32] spl: Drop the switch() statement for OS selection   Simon Glass
• [PATCH v2 09/14] lmb: Tidy up structure access   Simon Glass
• [PATCH v2 09/17] dfu: Detach the controller on error   Marek Vasut
• [PATCH v2 09/22] pinctrl: sunxi: add new D1 pinctrl support   Andre Przywara
• [PATCH v2 09/27] moveconfig: Correct parameter-type warnings   Simon Glass
• [PATCH v2 09/32] spl: Avoid an #ifdef when printing gd->malloc_ptr   Simon Glass
• [PATCH v2 1/1] mtd: nand: raw: atmel: Add error handling when rb-gpios missing   Alexander Dahl
• [PATCH v2 1/1] mtd: nand: raw: atmel: Add error handling when rb-gpios missing   Eugen Hristev
• [PATCH v2 1/1] mtd: nand: raw: atmel: Add error handling when rb-gpios missing   Michael Nazzareno Trimarchi
• [PATCH v2 1/1] mtd: nand: raw: atmel: Add error handling when rb-gpios missing   Eugen Hristev
• [PATCH v2 1/2] arm: dts: rockchip: sync DT for RK3588 series with Linux   FUKAUMI Naoki
• [PATCH v2 1/2] binman: openssl: x509: ti_secure_rom: Add support for bootcore_opts   Neha Malcom Francis
• [PATCH v2 1/2] cmd: thordown: Add proper dependency for CMD_THOR_DOWNLOAD   Venkatesh Yadav Abbarapu
• [PATCH v2 1/2] cmd: thordown: Add proper dependency for CMD_THOR_DOWNLOAD   Tom Rini
• [PATCH v2 1/2] dm: core: ofnode: Add ofnode_read_bootscript_flash()   Michal Simek
• [PATCH v2 1/2] dt-bindings: clock: Add Amlogic A1 clock bindings   Igor Prusov
• [PATCH v2 1/2] lmb: remove overlapping region with next range   Udit Kumar
• [PATCH v2 1/2] risc-v: implement DBCN write byte   Heinrich Schuchardt
• [PATCH v2 1/2] rockchip: Kconfig: Enable external TPL binary for rk3308   Massimo Pegorer
• [PATCH v2 1/2] rockchip: Kconfig: Enable external TPL binary for rk3308   FUKAUMI Naoki
• [PATCH v2 1/2] rockchip: Kconfig: Enable external TPL binary for rk3308   Kever Yang
• [PATCH v2 1/2] spi: zynqmp_qspi: Change flush cache to invalidate cache   Venkatesh Yadav Abbarapu
• [PATCH v2 1/2] tools: mkimage: Add StarFive SPL image support   Heinrich Schuchardt
• [PATCH v2 1/2] tools: mkimage: Add StarFive SPL image support   Milan P. Stanić
• [PATCH v2 1/3] common: add prototype & rename populate_serial_number()   Artur Rojek
• [PATCH V2 1/3] configs: andes: add vender prefix for target name   Randolph
• [PATCH V2 1/3] configs: andes: add vender prefix for target name   Tom Rini
• [PATCH v2 1/3] mtd: nand: raw: rockchip_nfc: add NAND_SKIP_BBTSCAN option   Johan Jonker
• [PATCH v2 1/3] phy: Fix generic_setup_phy() return value on power on failure   Jonas Karlman
• [PATCH v2 1/3] phy: Fix generic_setup_phy() return value on power on failure   Tom Rini
• [PATCH v2 1/3] power: domain: ti: Enable single config for power domain   Udit Kumar
• [PATCH v2 1/3] power: domain: ti: Enable single config for power domain   Nishanth Menon
• [PATCH v2 1/3] riscv: bootstage: correct bootstage_report guard   Leo Liang
• [PATCH v2 1/3] trace: Use 64bit variable for start and len   Michal Simek
• [PATCH v2 1/3] trace: Use 64bit variable for start and len   Simon Glass
• [PATCH v2 1/4] armv8: fsl-layerscape: make some functions static   Laurentiu Tudor
• [PATCH v2 1/4] buildman: Keep all common output files   Simon Glass
• [PATCH v2 1/4] buildman: Keep all common output files   Tom Rini
• [PATCH v2 1/4] buildman: Keep all common output files   Simon Glass
• [PATCH v2 1/4] efi: Correct handling of frame buffer   Simon Glass
• [PATCH v2 1/4] part: rename disk_partition_type_uuid()   Heinrich Schuchardt
• [PATCH v2 1/4] part: rename disk_partition_type_uuid()   Simon Glass
• [PATCH v2 1/4] part: rename disk_partition_type_uuid()   Heinrich Schuchardt
• [PATCH v2 1/4] part: rename disk_partition_type_uuid()   Tom Rini
• [PATCH v2 1/5] imx8mm_evk_defconfig: Select CONFIG_IMX_TMU   sbabic at denx.de
• [PATCH v2 1/5] power: regulator: Only run autoset once for each regulator   Kever Yang
• [PATCH v2 1/5] sunxi: psci: clean away preprocessor macros   Andre Przywara
• [PATCH v2 1/5] sunxi: psci: clean away preprocessor macros   Sam Edwards
• [PATCH v2 1/6] Kbuild: Fix cleanup of generated sources in tools   Rasmus Villemoes
• [PATCH v2 1/6] net: wget: prevent overwriting reserved memory   Masahisa Kojima
• [PATCH v2 1/6] net: wget: prevent overwriting reserved memory   Simon Glass
• [PATCH v2 1/6] net: wget: prevent overwriting reserved memory   Masahisa Kojima
• [PATCH v2 1/6] scripts: Port Linux's gen_compile_commands.py to U-Boot   Joao Marcos Costa
• [PATCH v2 1/7] drivers: misc: k3_avs: Add linux compatible to maintain sync   Neha Malcom Francis
• [PATCH v2 1/7] drivers: misc: k3_avs: Add linux compatible to maintain sync   Nishanth Menon
• [PATCH v2 1/7] drivers: misc: k3_avs: Add linux compatible to maintain sync   reidt
• [PATCH v2 1/7] drivers: misc: k3_avs: Add linux compatible to maintain sync   Neha Malcom Francis
• [PATCH v2 1/7] pci: pcie_dw_rockchip: Configure number of lanes and link width speed   Kever Yang
• [PATCH v2 1/7] rng: stm32: rename STM32 RNG driver   Gatien Chevallier
• [PATCH v2 1/7] rng: stm32: rename STM32 RNG driver   Patrick DELAUNAY
• [PATCH v2 1/8] drivers: introduce Secure Monitor uclass   Alexey Romanov
• [PATCH v2 1/8] drivers: introduce Secure Monitor uclass   Simon Glass
• [PATCH v2 1/9] dm: core: Allow marking driver model as dead   Simon Glass
• [PATCH v2 1/9] dm: core: Allow marking driver model as dead   Bin Meng
• [PATCH v2 10/14] lmb: Avoid long for loop counters and function returns   Simon Glass
• [PATCH v2 10/17] dfu: Use plain udevice for UDC controller interaction   Marek Vasut
• [PATCH v2 10/22] sunxi: introduce NCAT2 generation model   Andre Przywara
• [PATCH v2 10/27] moveconfig: Use f strings where possible   Simon Glass
• [PATCH v2 10/32] spl: Remove #ifdefs with BOOTSTAGE   Simon Glass
• [PATCH v2 11/14] lmb: Change functions returning long to return int   Simon Glass
• [PATCH v2 11/17] spl: sdp: Detach the controller on error   Marek Vasut
• [PATCH v2 11/22] pinctrl: sunxi: add Allwinner D1 pinctrl description   Andre Przywara
• [PATCH v2 11/27] moveconfig: Correct unused variables   Simon Glass
• [PATCH v2 11/32] spl: Rename spl_load_fit_image() to load_simple_fit()   Simon Glass
• [PATCH v2 12/14] lmb: Tidy up lmb_overlaps_region()   Simon Glass
• [PATCH v2 12/17] sdp: Use plain udevice for UDC controller interaction   Marek Vasut
• [PATCH v2 12/22] clk: sunxi: Add support for the D1 CCU   Andre Przywara
• [PATCH v2 12/27] moveconfig: Correct non-snake variables names   Simon Glass
• [PATCH v2 12/32] spl: Move the full FIT code to spl_fit.c   Simon Glass
• [PATCH v2 13/14] lmb: Document and tidy lmb_add_region_flags()   Simon Glass
• [PATCH v2 13/17] thordown: Use plain udevice for UDC controller interaction   Marek Vasut
• [PATCH v2 13/17] thordown: Use plain udevice for UDC controller interaction   Mattijs Korpershoek
• [PATCH v2 13/22] sunxi: clock: D1/R528: Enable PLL LDO during PLL1 setup   Andre Przywara
• [PATCH v2 13/27] moveconfig: Correct use of members not declared in __init__()   Simon Glass
• [PATCH v2 13/32] spl: Use the correct FIT_..._PROP constants   Simon Glass
• [PATCH v2 14/14] fs: Fix a confusing error about overlapping regions   Simon Glass
• [PATCH v2 14/14] fs: Fix a confusing error about overlapping regions   Heinrich Schuchardt
• [PATCH v2 14/17] usb: gadget: acm: Use plain udevice for UDC controller interaction   Marek Vasut
• [PATCH v2 14/17] usb: gadget: acm: Use plain udevice for UDC controller interaction   Mattijs Korpershoek
• [PATCH v2 14/22] sunxi: clock: support D1/R528 PLL6 clock   Andre Przywara
• [PATCH v2 14/27] moveconfig: Correct list-comprehension warnings   Simon Glass
• [PATCH v2 14/32] spl: Move bloblist writing until the image is known   Simon Glass
• [PATCH v2 15/17] usb: gadget: ether: Use plain udevice for UDC controller interaction   Marek Vasut
• [PATCH v2 15/17] usb: gadget: ether: Use plain udevice for UDC controller interaction   Mattijs Korpershoek
• [PATCH v2 15/17] usb: gadget: ether: Use plain udevice for UDC controller interaction   Marek Vasut
• [PATCH v2 15/17] usb: gadget: ether: Use plain udevice for UDC controller interaction   Mattijs Korpershoek
• [PATCH v2 15/22] Kconfig: sunxi: prepare for using drivers/ram/sunxi   Andre Przywara
• [PATCH v2 15/27] moveconfig: Use an encoding with open()   Simon Glass
• [PATCH v2 15/32] dm: core: Reverse the argument order in ofnode_copy_props()   Simon Glass
• [PATCH v2 16/17] dm: usb: udc: Drop legacy udevice handler functions   Marek Vasut
• [PATCH v2 16/22] sunxi: add R528/T113-s3/D1(s) DRAM initialisation code   Andre Przywara
• [PATCH v2 16/27] moveconfig: Fix misc pylint warnings   Simon Glass
• [PATCH v2 16/32] dm: core: Ensure we run flattree tests on ofnode   Simon Glass
• [PATCH v2 17/17] board: usb: Replace legacy usb_gadget_handle_interrupts()   Marek Vasut
• [PATCH v2 17/22] sunxi: add Allwinner R528/T113 SoC support   Andre Przywara
• [PATCH v2 17/27] moveconfig: Only show output when there is a reason   Simon Glass
• [PATCH v2 17/32] dm: core: Tidy up comments in the ofnode tests   Simon Glass
• [PATCH v2 18/22] sunxi: R528: add SMHC2 pin pull ups support   Andre Przywara
• [PATCH v2 18/27] moveconfig: Reduce the amount of output   Simon Glass
• [PATCH v2 18/32] dm: core: Add a function to create an empty tree   Simon Glass
• [PATCH v2 19/19] boot: Join ARCH_FIXUP_FDT_MEMORY with related options   Simon Glass
• [PATCH v2 19/19] boot: Join ARCH_FIXUP_FDT_MEMORY with related options   Tom Rini
• [PATCH v2 19/22] sunxi: refactor serial base addresses to avoid asm/arch/cpu.h   Andre Przywara
• [PATCH v2 19/27] moveconfig: Avoid showing progress at the end   Simon Glass
• [PATCH v2 19/32] dm: core: Add a way to copy a node   Simon Glass
• [PATCH v2 2/2] arm: dts: rockchip: rock-5b: add support for PCIe3 and NVMe   FUKAUMI Naoki
• [PATCH v2 2/2] clk: Add clock driver for Amlogic A1   Igor Prusov
• [PATCH v2 2/2] doc: rockchip: Update and improve info on rk3308, TPL and TF-A   Massimo Pegorer
• [PATCH v2 2/2] doc: rockchip: Update and improve info on rk3308, TPL and TF-A   Kever Yang
• [PATCH v2 2/2] DONOTMERGE: arm: dts: k3-j7200-binman: Enable split mode for MCU R5   Neha Malcom Francis
• [PATCH v2 2/2] risc-v: implement DBCN based debug console   Heinrich Schuchardt
• [PATCH v2 2/2] risc-v: implement DBCN based debug console   Leo Liang
• [PATCH v2 2/2] riscv: dts: starfive: generate u-boot-spl.bin.normal.out   Heinrich Schuchardt
• [PATCH v2 2/2] riscv: dts: starfive: generate u-boot-spl.bin.normal.out   Milan P. Stanić
• [PATCH v2 2/2] riscv: dts: starfive: generate u-boot-spl.bin.normal.out   Jonas Karlman
• [PATCH v2 2/2] riscv: dts: starfive: generate u-boot-spl.bin.normal.out   Heinrich Schuchardt
• [PATCH v2 2/2] riscv: dts: starfive: generate u-boot-spl.bin.normal.out   Massimo Pegorer
• [PATCH v2 2/2] riscv: dts: starfive: generate u-boot-spl.bin.normal.out   Massimo Pegorer
• [PATCH v2 2/2] riscv: dts: starfive: generate u-boot-spl.bin.normal.out   Jonas Karlman
• [PATCH v2 2/2] spi: zynqmp_qspi: Workaround for small data cache issue   Venkatesh Yadav Abbarapu
• [PATCH v2 2/2] test: lmb: Add test for coalescing and overlap range   Udit Kumar
• [PATCH v2 2/2] test: lmb: Add test for coalescing and overlap range   Simon Glass
• [PATCH v2 2/2] zynqmp: config: Add proper dependencies for USB   Venkatesh Yadav Abbarapu
• [PATCH v2 2/3] arm: dts: at91: sama5: Add flexcom4 node   Artur Rojek
• [PATCH v2 2/3] clk: ti: Add support to enable configs conditionally   Udit Kumar
• [PATCH v2 2/3] clk: ti: Add support to enable configs conditionally   Nishanth Menon
• [PATCH V2 2/3] configs: andes: rearrange SPL mode memory layout   Randolph
• [PATCH v2 2/3] dm: prepare rkmtd UCLASS   Johan Jonker
• [PATCH v2 2/3] phy: Return success from generic_setup_phy() when phy is not found   Jonas Karlman
• [PATCH v2 2/3] phy: Return success from generic_setup_phy() when phy is not found   Tom Rini
• [PATCH v2 2/3] riscv: timer: add timer_get_boot_us for BOOTSTAGE   Leo Liang
• [PATCH v2 2/3] riscv: timer: add timer_get_boot_us for BOOTSTAGE   Chanho Park
• [PATCH v2 2/3] trace: Move trace_clocks description above record offset calculation   Michal Simek
• [PATCH v2 2/3] trace: Move trace_clocks description above record offset calculation   Simon Glass
• [PATCH v2 2/4] bootstd: Add a return code to bootflow menu   Simon Glass
• [PATCH v2 2/4] buildman: Show progress when regenerating the board.cfg file   Simon Glass
• [PATCH v2 2/4] buildman: Show progress when regenerating the board.cfg file   Simon Glass
• [PATCH v2 2/4] cmd: gpt: use UUID accessor more consistently   Heinrich Schuchardt
• [PATCH v2 2/4] cmd: gpt: use UUID accessor more consistently   Simon Glass
• [PATCH v2 2/4] drivers: net: fsl-mc: add support for MC reserved memory   Laurentiu Tudor
• [PATCH v2 2/5] regulator: rk8xx: Return correct voltage for buck converters   Kever Yang
• [PATCH v2 2/5] thermal: imx_tmu: Fix the polling default   sbabic at denx.de
• [PATCH v2 2/6] net: wget: add wget with dns utility function   Masahisa Kojima
• [PATCH v2 2/6] net: wget: add wget with dns utility function   Ilias Apalodimas
• [PATCH v2 2/6] net: wget: add wget with dns utility function   Masahisa Kojima
• [PATCH v2 2/6] scripts/gen_compile_commands.py: adapt _LINE_PATTERN   Joao Marcos Costa
• [PATCH v2 2/7] arm: mach-k3: j721e: dev-data: Add mcu_timer0 ID   Neha Malcom Francis
• [PATCH v2 2/7] arm: mach-k3: j721e: dev-data: Add mcu_timer0 ID   Manorit Chawdhry
• [PATCH v2 2/7] configs: default activate CONFIG_RNG_STM32 for STM32MP13x platforms   Gatien Chevallier
• [PATCH v2 2/7] phy: rockchip: snps-pcie3: Refactor to use clk_bulk API   Kever Yang
• [PATCH v2 2/8] sandbox: add sandobx sm uclass driver   Alexey Romanov
• [PATCH v2 2/8] sandbox: add sandobx sm uclass driver   Simon Glass
• [PATCH v2 2/9] x86: broadwell: Show the memory delay   Simon Glass
• [PATCH v2 20/22] riscv: dts: allwinner: Add the D1/D1s SoC devicetree   Andre Przywara
• [PATCH v2 20/27] moveconfig: Use u_boot_pylib for terminal colour   Simon Glass
• [PATCH v2 20/32] dm: core: Add a way to delete a node   Simon Glass
• [PATCH v2 21/22] ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi   Andre Przywara
• [PATCH v2 21/27] moveconfig: Show failures in progress   Simon Glass
• [PATCH v2 21/32] dm: core: Add a way to convert a devicetree to a dtb   Simon Glass
• [PATCH v2 22/22] sunxi: add MangoPi MQ-R board support   Andre Przywara
• [PATCH v2 22/27] moveconfig: Show a summary at the end   Simon Glass
• [PATCH v2 22/32] dm: core: Support writing a boolean   Simon Glass
• [PATCH v2 23/27] moveconfig: Drop the initial output   Simon Glass
• [PATCH v2 23/32] dm: core: Support writing a 64-bit value   Simon Glass
• [PATCH v2 24/27] moveconfig: Move summaries to the end   Simon Glass
• [PATCH v2 24/32] dm: core: Add tests for oftree_path()   Simon Glass
• [PATCH v2 25/27] moveconfig: Rename the tool to qconfig   Simon Glass
• [PATCH v2 25/32] sandbox: Move reading the RAM buffer into a better place   Simon Glass
• [PATCH v2 26/27] qconfig: Rename the database file   Simon Glass
• [PATCH v2 26/32] sandbox: Init the EC properly even if no state file is available   Simon Glass
• [PATCH v2 27/27] qconfig: Update the documentation   Simon Glass
• [PATCH v2 27/27] qconfig: Update the documentation   Heinrich Schuchardt
• [PATCH v2 27/27] qconfig: Update the documentation   Simon Glass
• [PATCH v2 27/32] sandbox: Only read the state if we have a state file   Simon Glass
• [PATCH v2 28/32] sandbox: Move the bloblist down a little in memory   Simon Glass
• [PATCH v2 29/32] bloblist: Support initing from multiple places   Simon Glass
• [PATCH v2 3/3] board: Add support for Conclusive KSTR-SAMA5D27   Artur Rojek
• [PATCH v2 3/3] config: j7200: remove not needed power config   Udit Kumar
• [PATCH v2 3/3] config: j7200: remove not needed power config   Nishanth Menon
• [PATCH V2 3/3] dts: andes: add SPL config option for itb layout   Randolph
• [PATCH V2 3/3] dts: andes: add SPL config option for itb layout   Tom Rini
• [PATCH V2 3/3] dts: andes: add SPL config option for itb layout   Lin Randolph
• [PATCH v2 3/3] phy: Refactor generic_{setup, shutdown}_phy() to reduce complexity   Jonas Karlman
• [PATCH v2 3/3] phy: Refactor generic_{setup, shutdown}_phy() to reduce complexity   Tom Rini
• [PATCH v2 3/3] rockchip: cmd: add rkmtd command   Johan Jonker
• [PATCH v2 3/3] timer: riscv_aclint_timer: add timer_get_boot_us for BOOTSTAGE   Leo Liang
• [PATCH v2 3/3] timer: riscv_aclint_timer: add timer_get_boot_us for BOOTSTAGE   Chanho Park
• [PATCH v2 3/3] timer: riscv_aclint_timer: add timer_get_boot_us for BOOTSTAGE   Simon Glass
• [PATCH v2 3/3] timer: riscv_aclint_timer: add timer_get_boot_us for BOOTSTAGE   Chanho Park
• [PATCH v2 3/3] trace: Fix alignment logic in flyrecord header   Michal Simek
• [PATCH v2 3/3] trace: Fix alignment logic in flyrecord header   Simon Glass
• [PATCH v2 3/3] trace: Fix alignment logic in flyrecord header   Michal Simek
• [PATCH v2 3/3] trace: Fix alignment logic in flyrecord header   Simon Glass
• [PATCH v2 3/3] trace: Fix alignment logic in flyrecord header   Michal Simek
• [PATCH v2 3/3] trace: Fix alignment logic in flyrecord header   Simon Glass
• [PATCH v2 3/3] trace: Fix alignment logic in flyrecord header   Michal Simek
• [PATCH v2 3/3] trace: Fix alignment logic in flyrecord header   Tom Rini
• [PATCH v2 3/3] trace: Fix alignment logic in flyrecord header   Michal Simek
• [PATCH v2 3/3] trace: Fix alignment logic in flyrecord header   Tom Rini
• [PATCH v2 3/3] trace: Fix alignment logic in flyrecord header   Tom Rini
• [PATCH v2 3/3] trace: Fix alignment logic in flyrecord header   Michal Simek
• [PATCH v2 3/4] board: freescale: ls2080a: declare MC reserved regions   Laurentiu Tudor
• [PATCH v2 3/4] buildman: Start the clock when the build starts   Simon Glass
• [PATCH v2 3/4] buildman: Start the clock when the build starts   Simon Glass
• [PATCH v2 3/4] cmd: gpt: fix calc_parts_list_len()   Heinrich Schuchardt
• [PATCH v2 3/4] cmd: gpt: fix calc_parts_list_len()   Simon Glass
• [PATCH v2 3/4] cmd: gpt: fix calc_parts_list_len()   Heinrich Schuchardt
• [PATCH v2 3/4] cmd: kaslrseed: Use common API to fixup FDT   Chris Morgan
• [PATCH v2 3/4] cmd: kaslrseed: Use common API to fixup FDT   Simon Glass
• [PATCH v2 3/4] x86: coreboot: Add a boot script   Simon Glass
• [PATCH v2 3/5] regulator: rk8xx: Return correct voltage for switchout converters   Kever Yang
• [PATCH v2 3/5] thermal: imx_tmu: Increase the log level for high temperatures   sbabic at denx.de
• [PATCH v2 3/6] blk: blkmap: add ramdisk creation utility function   Masahisa Kojima
• [PATCH v2 3/6] blk: blkmap: add ramdisk creation utility function   Simon Glass
• [PATCH v2 3/6] scripts/gen_compile_commands.py: fix docstring   Joao Marcos Costa
• [PATCH v2 3/7] arm: mach-k3: j721e_init: Move clk_k3 probe before loading TIFS   Neha Malcom Francis
• [PATCH v2 3/7] arm: mach-k3: j721e_init: Move clk_k3 probe before loading TIFS   Nishanth Menon
• [PATCH v2 3/7] arm: mach-k3: j721e_init: Move clk_k3 probe before loading TIFS   Neha Malcom Francis
• [PATCH v2 3/7] phy: rockchip: snps-pcie3: Refactor to use a phy_init ops   Kever Yang
• [PATCH v2 3/7] rng: stm32: Implement configurable RNG clock error detection   Gatien Chevallier
• [PATCH v2 3/8] sandbox: dts: add meson secure monitor node   Alexey Romanov
• [PATCH v2 3/8] sandbox: dts: add meson secure monitor node   Simon Glass
• [PATCH v2 3/9] x86: Add some log categories   Simon Glass
• [PATCH v2 30/32] fdt: Allow the devicetree to come from a bloblist   Simon Glass
• [PATCH v2 30/32] fdt: Allow the devicetree to come from a bloblist   Ilias Apalodimas
• [PATCH v2 30/32] fdt: Allow the devicetree to come from a bloblist   Simon Glass
• [PATCH v2 30/32] fdt: Allow the devicetree to come from a bloblist   Ilias Apalodimas
• [PATCH v2 30/32] fdt: Allow the devicetree to come from a bloblist   Simon Glass
• [PATCH v2 30/32] fdt: Allow the devicetree to come from a bloblist   Ilias Apalodimas
• [PATCH v2 31/32] command: Include a required header in command.h   Simon Glass
• [PATCH v2 32/32] pci: serial: Support reading PCI-register size with base   Simon Glass
• [PATCH v2 4/4] board: freescale: ls1088a: declare MC reserved regions   Laurentiu Tudor
• [PATCH v2 4/4] cmd: gpt: fix gpt read   Heinrich Schuchardt
• [PATCH v2 4/4] cmd: gpt: fix gpt read   Simon Glass
• [PATCH v2 4/4] doc: qemu: arm: Add a section on booting Linux distros   Ilias Apalodimas
• [PATCH v2 4/4] kontron_sl28: Use u-boot-update.bin instead of u-boot.update   Simon Glass
• [PATCH v2 4/4] kontron_sl28: Use u-boot-update.bin instead of u-boot.update   Simon Glass
• [PATCH v2 4/4] usb: Avoid unbinding devices in use by bootflows   Simon Glass
• [PATCH v2 4/4] usb: Avoid unbinding devices in use by bootflows   Mattijs Korpershoek
• [PATCH v2 4/5] rockchip: Port IO-domain driver for RK3568 from linux   Kever Yang
• [PATCH v2 4/5] sunxi: psci: implement PSCI on R528   Andre Przywara
• [PATCH v2 4/5] sunxi: psci: implement PSCI on R528   Sam Edwards
• [PATCH v2 4/5] sunxi: psci: implement PSCI on R528   Andre Przywara
• [PATCH v2 4/5] thermal: imx_tmu: Fix the temperature unit   sbabic at denx.de
• [PATCH v2 4/6] efi_loader: support boot from URI device path   Masahisa Kojima
• [PATCH v2 4/6] efi_loader: support boot from URI device path   Ilias Apalodimas
• [PATCH v2 4/6] efi_loader: support boot from URI device path   Heinrich Schuchardt
• [PATCH v2 4/6] efi_loader: support boot from URI device path   Masahisa Kojima
• [PATCH v2 4/6] efi_loader: support boot from URI device path   Masahisa Kojima
• [PATCH v2 4/6] efi_loader: support boot from URI device path   Ilias Apalodimas
• [PATCH v2 4/6] efi_loader: support boot from URI device path   Masahisa Kojima
• [PATCH v2 4/6] efi_loader: support boot from URI device path   Ilias Apalodimas
• [PATCH v2 4/6] scripts/gen_compile_commands.py: add acknowledgments   Joao Marcos Costa
• [PATCH v2 4/7] drivers: firmware: ti_sci: Get SCI revision only if TIFS/SYSFW is up   Neha Malcom Francis
• [PATCH v2 4/7] drivers: firmware: ti_sci: Get SCI revision only if TIFS/SYSFW is up   Nishanth Menon
• [PATCH v2 4/7] drivers: firmware: ti_sci: Get SCI revision only if TIFS/SYSFW is up   Neha Malcom Francis
• [PATCH v2 4/7] drivers: firmware: ti_sci: Get SCI revision only if TIFS/SYSFW is up   Manorit Chawdhry
• [PATCH v2 4/7] drivers: firmware: ti_sci: Get SCI revision only if TIFS/SYSFW is up   Neha Malcom Francis
• [PATCH v2 4/7] phy: rockchip: snps-pcie3: Add bifurcation support for RK3568   Kever Yang
• [PATCH v2 4/7] rng: stm32: add RNG clock frequency restraint   Gatien Chevallier
• [PATCH v2 4/8] arm: dts: k3-am625-sk: Enable emmc in SPL   Sverdlin, Alexander
• [PATCH v2 4/8] arm: dts: k3-am625-sk: Enable emmc in SPL   Nishanth Menon
• [PATCH v2 4/8] arm: dts: k3-am625-sk: Enable emmc in SPL   Dhruva Gole
• [PATCH v2 4/8] sandbox: add tests for UCLASS_SM   Alexey Romanov
• [PATCH v2 4/8] sandbox: add tests for UCLASS_SM   Simon Glass
• [PATCH v2 4/9] x86: samus_tpl: Correct text base and alloc sizes   Simon Glass
• [PATCH v2 5/5] HACK: sunxi: psci: be compatible with v1 of R528 patchset   Andre Przywara
• [PATCH v2 5/5] HACK: sunxi: psci: be compatible with v1 of R528 patchset   Sam Edwards
• [PATCH v2 5/5] HACK: sunxi: psci: be compatible with v1 of R528 patchset   Andre Przywara
• [PATCH v2 5/5] rockchip: board: Add minimal generic RK3566/RK3568 board   Kever Yang
• [PATCH v2 5/5] thermal: imx_tmu: Increase the polling interval   sbabic at denx.de
• [PATCH v2 5/6] .gitignore: add compile_commands.json   Joao Marcos Costa
• [PATCH v2 5/6] cmd: efidebug: add uri device path   Masahisa Kojima
• [PATCH v2 5/7] configs: j721e: Remove HBMC_AM654 config   Neha Malcom Francis
• [PATCH v2 5/7] configs: j721e: Remove HBMC_AM654 config   Nishanth Menon
• [PATCH v2 5/7] configs: j721e: Remove HBMC_AM654 config   Neha Malcom Francis
• [PATCH v2 5/7] phy: rockchip: snps-pcie3: Add support for RK3588   Kever Yang
• [PATCH v2 5/7] rng: stm32: add error concealment sequence   Gatien Chevallier
• [PATCH v2 5/8] sandbox: defconfig: enable CONFIG_SM option   Alexey Romanov
• [PATCH v2 5/8] sandbox: defconfig: enable CONFIG_SM option   Simon Glass
• [PATCH v2 5/9] x86: spl: Change the condition for copying U-Boot to RAM   Simon Glass
• [PATCH v2 6/6] doc: add documentation for gen_compile_commands.py   Joao Marcos Costa
• [PATCH v2 6/6] doc: add documentation for gen_compile_commands.py   Tom Rini
• [PATCH v2 6/6] doc: add documentation for gen_compile_commands.py   João Marcos Costa
• [PATCH v2 6/6] doc: add documentation for gen_compile_commands.py   Tom Rini
• [PATCH v2 6/6] doc: uefi: add HTTP Boot support   Masahisa Kojima
• [PATCH v2 6/6] doc: uefi: add HTTP Boot support   Ilias Apalodimas
• [PATCH v2 6/6] doc: uefi: add HTTP Boot support   Masahisa Kojima
• [PATCH v2 6/6] doc: uefi: add HTTP Boot support   Ilias Apalodimas
• [PATCH v2 6/7] arm: dts: k3-j721e-r5: Clean up inclusion hierarchy   Neha Malcom Francis
• [PATCH v2 6/7] phy: rockchip: naneng-combphy: Use signal from comb PHY on RK3588   Kever Yang
• [PATCH v2 6/7] rng: stm32: Implement custom RNG configuration support   Gatien Chevallier
• [PATCH v2 6/8] drivers: introduce Meson Secure Monitor driver   Alexey Romanov
• [PATCH v2 6/8] drivers: introduce Meson Secure Monitor driver   Simon Glass
• [PATCH v2 6/9] x86: broadwell: Avoid initing the CPU twice   Simon Glass
• [PATCH v2 7/7] arm: dts: k3-j721e: Sync with v6.5-rc1   Neha Malcom Francis
• [PATCH v2 7/7] arm: dts: k3-j721e: Sync with v6.5-rc1   Manorit Chawdhry
• [PATCH v2 7/7] arm: dts: k3-j721e: Sync with v6.5-rc1   Neha Malcom Francis
• [PATCH v2 7/7] arm: dts: k3-j721e: Sync with v6.5-rc1   Nishanth Menon
• [PATCH v2 7/7] arm: dts: k3-j721e: Sync with v6.5-rc1   Neha Malcom Francis
• [PATCH v2 7/7] arm: dts: k3-j721e: Sync with v6.5-rc1   Neha Malcom Francis
• [PATCH v2 7/7] ARM: dts: stm32: add RNG node for STM32MP13x platforms   Gatien Chevallier
• [PATCH v2 7/7] rockchip: rk3568-radxa-e25: Enable pcie3x1 node   Kever Yang
• [PATCH v2 7/8] arch: meson: sm: set correct order of the includes   Alexey Romanov
• [PATCH v2 7/8] arch: meson: sm: set correct order of the includes   Simon Glass
• [PATCH v2 7/9] x86: broadwell: Set up MTRRs   Simon Glass
• [PATCH v2 7/9] x86: broadwell: Set up MTRRs   Bin Meng
• [PATCH v2 8/8] arch: meson: use secure monitor driver   Alexey Romanov
• [PATCH v2 8/8] arch: meson: use secure monitor driver   Simon Glass
• [PATCH v2 8/9] x86: dm: Mark driver model as dead when disabling CAR   Simon Glass
• [PATCH v2 8/9] x86: dm: Mark driver model as dead when disabling CAR   Bin Meng
• [PATCH v2 9/9] x86: doc: Update the list of supported Chromebooks   Simon Glass
• [PATCH v2] arm64: versal: Add SelectMAP boot mode identification   Polak, Leszek
• [PATCH v2] arm64: versal: Add SelectMAP boot mode identification   Michal Simek
• [PATCH v2] arm64: zynqmp: Add output-enable pins to SOMs   Michal Simek
• [PATCH v2] arm: imx: imx8m: imx9: Fix DRAM size calculation due to rom_pointer   sbabic at denx.de
• [PATCH v2] arm: rpi: remove boot_targets for default standard boot   Date Huang
• [PATCH v2] arm: rpi: remove boot_targets for default standard boot   Simon Glass
• [PATCH v2] binman: doc: fix reference tag placement for Logging section   Massimo Pegorer
• [PATCH v2] binman: doc: fix reference tag placement for Logging section   Simon Glass
• [PATCH v2] binman: Fix SyntaxWarning: invalid escape sequence '\('   Rong Tao
• [PATCH v2] binman: Fix SyntaxWarning: invalid escape sequence '\('   Simon Glass
• [PATCH v2] binman: Fix SyntaxWarning: invalid escape sequence '\('   荣涛
• [PATCH v2] binman: Fix SyntaxWarning: invalid escape sequence '\('   Simon Glass
• [PATCH v2] binman: Fix SyntaxWarning: invalid escape sequence '\('   Rong Tao
• [PATCH v2] binman: Fix SyntaxWarning: invalid escape sequence '\('   Simon Glass
• [PATCH v2] bmips: Add Inteno XG6846 board   Linus Walleij
• [PATCH v2] bootstd: Make efi_mgr bootmeth work for non-sandbox setups   Mark Kettenis
• [PATCH v2] bootstd: Make efi_mgr bootmeth work for non-sandbox setups   Simon Glass
• [PATCH v2] bootstd: Make efi_mgr bootmeth work for non-sandbox setups   Mark Kettenis
• [PATCH v2] bootstd: Make efi_mgr bootmeth work for non-sandbox setups   Simon Glass
• [PATCH v2] bootstd: Make efi_mgr bootmeth work for non-sandbox setups   Mark Kettenis
• [PATCH v2] bootstd: Make efi_mgr bootmeth work for non-sandbox setups   Simon Glass
• [PATCH v2] bootstd: Make efi_mgr bootmeth work for non-sandbox setups   Mark Kettenis
• [PATCH v2] bootstd: Make efi_mgr bootmeth work for non-sandbox setups   Simon Glass
• [PATCH v2] bootstd: sata: Add bootstd support for ahci sata   Tony Dinh
• [PATCH v2] bootstd: sata: Add bootstd support for ahci sata   Tony Dinh
• [PATCH v2] CI: allow jobs to be run in merge requests   Andrejs Cainikovs
• [PATCH v2] CI: allow jobs to be run in merge requests   Tom Rini
• [PATCH v2] clk: Dont return error when assigned-clocks is empty or missing   Michal Simek
• [PATCH v2] clk: ti: Notify AVS driver upon setting clock rate   Udit Kumar
• [PATCH v2] clk: ti: Notify AVS driver upon setting clock rate   Nishanth Menon
• [PATCH v2] clk: ti: Notify AVS driver upon setting clock rate   Kumar, Udit
• [PATCH v2] clk: ti: Notify AVS driver upon setting clock rate   Nishanth Menon
• [PATCH v2] cmd: dm: allow for selecting uclass and device   Simon Glass
• [PATCH v2] cmd: sf: Fix the flash_is_unlocked api size parameter   Venkatesh Yadav Abbarapu
• [PATCH v2] cmd: sf: Fix the flash_is_unlocked api size parameter   Simon Glass
• [PATCH v2] cmd: sf: Fix the flash_is_unlocked api size parameter   Michal Simek
• [PATCH v2] dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation   Simon Glass
• [PATCH v2] dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation : regression   Roger Quadros
• [PATCH v2] dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation : regression   Jonas Karlman
• [PATCH v2] dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation : regression   Roger Quadros
• [PATCH v2] dm: core: support reading a single indexed u64 value   Michal Simek
• [PATCH v2] dt-bindings: mtd: Add a schema for binman   Simon Glass
• [PATCH v2] dt-bindings: mtd: Add a schema for binman   Rob Herring
• [PATCH v2] env: ti: ti_common.env: Fix get_overlaystring for FIT Image   Manorit Chawdhry
• [PATCH v2] env: ti: ti_common.env: Fix get_overlaystring for FIT Image   Andrew Davis
• [PATCH v2] env: ti: ti_common.env: Fix get_overlaystring for FIT Image   Manorit Chawdhry
• [PATCH v2] fpga: define dummy fpga_load function for debug build   Michal Simek
• [PATCH v2] global: Use proper project name U-Boot (next2)   Michal Simek
• [PATCH v2] global: Use proper project name U-Boot (next2)   Simon Glass
• [PATCH v2] global: Use proper project name U-Boot (next2)   Michal Simek
• [PATCH v2] mach-imx: bootaux: fix building with disabled bootelf   sbabic at denx.de
• [PATCH v2] Makefile: Force regeneration of env.txt   Andrew Davis
• [PATCH v2] Makefile: Force regeneration of env.txt   Simon Glass
• [PATCH v2] mx8m: csf.sh: pad csf blob for u-boot.itb to CSF_SIZE minus IVT header   Rasmus Villemoes
• [PATCH v2] mx8m: csf.sh: pad csf blob for u-boot.itb to CSF_SIZE minus IVT header   Fabio Estevam
• [PATCH v2] mx8m: csf.sh: pad csf blob for u-boot.itb to CSF_SIZE minus IVT header   Marek Vasut
• [PATCH v2] net: eth-uclass: Setup ROM source only when ROM reading passes   Michal Simek
• [PATCH v2] net: phy: broadcom: add support for BCM54210E   Tom Rini
• [PATCH v2] riscv: andesv5: Prefer using the generic RISC-V timer driver in S-mode   Yu Chien Peter Lin
• [PATCH v2] riscv: enable multi-range memory layout   Fei Wu
• [PATCH v2] riscv: enable multi-range memory layout   Heinrich Schuchardt
• [PATCH v2] riscv: enable multi-range memory layout   Wu, Fei
• [PATCH v2] riscv: enable multi-range memory layout   Wu, Fei
• [PATCH v2] riscv: enable multi-range memory layout   Heinrich Schuchardt
• [PATCH v2] riscv: enable multi-range memory layout   Wu, Fei
• [PATCH v2] riscv: enable multi-range memory layout   Heinrich Schuchardt
• [PATCH v2] riscv: enable multi-range memory layout   Heinrich Schuchardt
• [PATCH v2] riscv: enable multi-range memory layout   Wu, Fei
• [PATCH v2] riscv: enable multi-range memory layout   Wu, Fei
• [PATCH v2] riscv: enable multi-range memory layout   Anup Patel
• [PATCH v2] riscv: enable multi-range memory layout   Heinrich Schuchardt
• [PATCH v2] rockchip: include: asm: fix entering download mode rk3066   Johan Jonker
• [PATCH v2] rockchip: include: asm: fix entering download mode rk3066   Johan Jonker
• [PATCH v2] spi: cadence_qspi: Select flash subnode at runtime   Udit Kumar
• [PATCH v2] test/py: sleep: Add a test for the time command   Love Kumar
• [PATCH v2] test: print: Fix hexdump test on 64bit systems   Tom Rini
• [PATCH v2] usb: check for companion controller in uclass   Fabrice Gasnier
• [PATCH v2] usb: check for companion controller in uclass   Marek Vasut
• [PATCH v2] usb: check for companion controller in uclass   Fabrice Gasnier
• [PATCH v2] usb: check for companion controller in uclass   Marek Vasut
• [PATCH v2] usb: check for companion controller in uclass   Fabrice Gasnier
• [PATCH v2] usb: check for companion controller in uclass   Marek Vasut
• [PATCH v2] usb: check for companion controller in uclass   Fabrice Gasnier
• [PATCH v2] usb: check for companion controller in uclass   Marek Vasut
• [PATCH v2] usb: host: ohci-generic: Make usage of clock/reset bulk() API   Fabrice Gasnier
• [PATCH v2] usb: host: ohci-generic: Make usage of clock/reset bulk() API   Marek Vasut
• [PATCH v2] usb: host: ohci-generic: Make usage of clock/reset bulk() API   Xavier Drudis Ferran
• [PATCH v2 RESEND] mmc: dw_mmc: reset controller after data error   Eugen Hristev
• [PATCH V3 0/2] andes: rearrange defconfig and dts   Randolph
• [PATCH v3 0/2] J7200 device tree sync from v6.6-rc1 to u-boot   Reid Tonking
• [PATCH v3 0/2] J7200 device tree sync from v6.6-rc1 to u-boot   Reid Tonking
• [PATCH v3 0/2] riscv: starfive: generate u-boot-spl.bin.normal.out   Heinrich Schuchardt
• [PATCH v3 0/3] bootstage support for risc-v   Chanho Park
• [PATCH v3 0/3] enable power and clock Kconfig conditionally   Udit Kumar
• [PATCH v3 0/3] enable power and clock Kconfig conditionally   Kumar, Udit
• [PATCH v3 0/4] Allwinner R528/T113s PSCI   Sam Edwards
• [PATCH v3 0/4] malloc: Reduce size by initializing data at runtime   Sean Anderson
• [PATCH v3 0/4] support for booting the compressed U-boot binary on Rockchip based ARM64 SOC's   Manoj Sai
• [PATCH v3 0/4] support for booting the compressed U-boot binary on Rockchip based ARM64 SOC's   Jonas Karlman
• [PATCH v3 0/5] Populate kaslr seed with RNG   seanedmond at linux.microsoft.com
• [PATCH v3 0/6] [PATCH v3 0/6] J721E DTS Sync with Kernel v6.6-rc1   Neha Malcom Francis
• [PATCH v3 0/6] DTS Sync from v6.5-rc1 to u-boot   Manorit Chawdhry
• [PATCH v3 0/7] Add EFI HTTP boot support   Masahisa Kojima
• [PATCH v3 0/7] Port gen_compile_commands.py from Linux to U-Boot   Joao Marcos Costa
• [PATCH v3 0/7] Port gen_compile_commands.py from Linux to U-Boot   João Marcos Costa
• [PATCH v3 0/7] Port gen_compile_commands.py from Linux to U-Boot   Tom Rini
• [PATCH v3 0/7] rng: stm32: support STM32MP13x platforms   Gatien Chevallier
• [PATCH v3 0/8] Add SM uclass and Meson SM driver   Alexey Romanov
• [PATCH v3 0/8] Add SM uclass and Meson SM driver   neil.armstrong at linaro.org
• [PATCH v3 0/8] Add SM uclass and Meson SM driver   Neil Armstrong
• [PATCH v3 00/13] firmware: scmi: add SCMI base protocol support   AKASHI Takahiro
• [PATCH v3 00/16]Introduce initial TI's J784S4 and AM69 support   Apurva Nandan
• [PATCH v3 00/16]Introduce initial TI's J784S4 and AM69 support   Marcel Ziswiler
• [PATCH v3 00/20] Kconfig: Tidy up some options   Simon Glass
• [PATCH v3 00/27] moveconfig: Drop old code and tidy up   Simon Glass
• [PATCH v3 00/38] spl: Preparation for Universal Payload   Simon Glass
• [PATCH v3 00/38] spl: Preparation for Universal Payload   Tom Rini
• [PATCH v3 01/13] scmi: refactor the code to hide a channel from devices   AKASHI Takahiro
• [PATCH v3 01/13] scmi: refactor the code to hide a channel from devices   Etienne CARRIERE
• [PATCH v3 01/13] scmi: refactor the code to hide a channel from devices   AKASHI Takahiro
• [PATCH v3 01/16] arm: dts: Introduce j784s4 dts from linux kernel   Apurva Nandan
• [PATCH v3 01/16] arm: dts: Introduce j784s4 dts from linux kernel   Roger Quadros
• [PATCH v3 01/16] arm: dts: Introduce j784s4 dts from linux kernel   Marcel Ziswiler
• [PATCH v3 01/16] arm: dts: Introduce j784s4 dts from linux kernel   Apurva Nandan
• [PATCH v3 01/20] lib: rational: Move the Kconfigs into the correct place   Simon Glass
• [PATCH v3 01/27] moveconfig: Drop -H option   Simon Glass
• [PATCH v3 01/38] spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_...   Simon Glass
• [PATCH v3 01/38] spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_...   Felix Brack
• [PATCH v3 01/38] spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_...   Simon Glass
• [PATCH v3 02/13] firmware: scmi: implement SCMI base protocol   AKASHI Takahiro
• [PATCH v3 02/16] arm: mach-k3: Add basic support for J784S4 SoC definition   Apurva Nandan
• [PATCH v3 02/16] arm: mach-k3: Add basic support for J784S4 SoC definition   Roger Quadros
• [PATCH v3 02/16] arm: mach-k3: Add basic support for J784S4 SoC definition   Marcel Ziswiler
• [PATCH v3 02/16] arm: mach-k3: Add basic support for J784S4 SoC definition   Apurva Nandan
• [PATCH v3 02/16] arm: mach-k3: Add basic support for J784S4 SoC definition   Apurva Nandan
• [PATCH v3 02/16] arm: mach-k3: Add basic support for J784S4 SoC definition   Apurva Nandan
• [PATCH v3 02/20] Kconfig: Move API into general setup   Simon Glass
• [PATCH v3 02/27] moveconfig: Avoid deprecation warning for setDaemon   Simon Glass
• [PATCH v3 02/38] spl: Rename SYS_SPL_ARGS_ADDR to SPL_PAYLOAD_ARGS_ADDR   Simon Glass
• [PATCH v3 03/13] firmware: scmi: move scmi_bind_protocols() backward   AKASHI Takahiro
• [PATCH v3 03/16] soc: ti: k3-socinfo: Add entry for J784S4 SoC   Apurva Nandan
• [PATCH v3 03/16] soc: ti: k3-socinfo: Add entry for J784S4 SoC   Marcel Ziswiler
• [PATCH v3 03/16] soc: ti: k3-socinfo: Add entry for J784S4 SoC   Nishanth Menon
• [PATCH v3 03/20] video: Move bmp code to drivers/video   Simon Glass
• [PATCH v3 03/27] moveconfig: Correct ordering of asteval import   Simon Glass
• [PATCH v3 03/38] spl: Avoid #ifdef with CONFIG_SPL_SYS_MALLOC   Simon Glass
• [PATCH v3 04/13] firmware: scmi: framework for installing additional protocols   AKASHI Takahiro
• [PATCH v3 04/13] firmware: scmi: framework for installing additional protocols   Etienne CARRIERE
• [PATCH v3 04/13] firmware: scmi: framework for installing additional protocols   AKASHI Takahiro
• [PATCH v3 04/16] arm: mach-k3: j784s4: Add clk and power support   Apurva Nandan
• [PATCH v3 04/16] arm: mach-k3: j784s4: Add clk and power support   Marcel Ziswiler
• [PATCH v3 04/20] video: Move the BMP options   Simon Glass
• [PATCH v3 04/20] video: Move the BMP options   Tom Rini
• [PATCH v3 04/27] moveconfig: Drop unused cleanup options   Simon Glass
• [PATCH v3 04/38] spl: mx6: powerpc: Drop the condition on timer_init()   Simon Glass
• [PATCH v3 04/38] spl: mx6: powerpc: Drop the condition on timer_init()   Christophe Leroy
• [PATCH v3 04/38] spl: mx6: powerpc: Drop the condition on timer_init()   Simon Glass
• [PATCH v3 05/13] firmware: scmi: install base protocol to SCMI agent   AKASHI Takahiro
• [PATCH v3 05/13] firmware: scmi: install base protocol to SCMI agent   Etienne CARRIERE
• [PATCH v3 05/13] firmware: scmi: install base protocol to SCMI agent   Etienne CARRIERE
• [PATCH v3 05/13] firmware: scmi: install base protocol to SCMI agent   AKASHI Takahiro
• [PATCH v3 05/13] firmware: scmi: install base protocol to SCMI agent   AKASHI Takahiro
• [PATCH v3 05/16] drivers: dma: Add support for J784S4 SoC   Apurva Nandan
• [PATCH v3 05/16] drivers: dma: Add support for J784S4 SoC   Marcel Ziswiler
• [PATCH v3 05/20] video: Move BMP options and code to video directory   Simon Glass
• [PATCH v3 05/27] moveconfig: Drop CONFIG-moving code   Simon Glass
• [PATCH v3 05/38] spl: Drop #ifdefs for BOARD_INIT and watchdog   Simon Glass
• [PATCH v3 06/13] firmware: scmi: add a check against availability of protocols   AKASHI Takahiro
• [PATCH v3 06/16] remoteproc: k3-r5: Extend support for R5F clusters on J784S4 SoCs   Apurva Nandan
• [PATCH v3 06/16] remoteproc: k3-r5: Extend support for R5F clusters on J784S4 SoCs   Roger Quadros
• [PATCH v3 06/16] remoteproc: k3-r5: Extend support for R5F clusters on J784S4 SoCs   Kumar, Udit
• [PATCH v3 06/16] remoteproc: k3-r5: Extend support for R5F clusters on J784S4 SoCs   Apurva Nandan
• [PATCH v3 06/20] FWU: Avoid showing an unselectable menu option   Simon Glass
• [PATCH v3 06/27] moveconfig: Drop check_defconfig() and update_dotconfig()   Simon Glass
• [PATCH v3 06/38] spl: Avoid #ifdef with CONFIG_SPL_PAYLOAD_ARGS_ADDR   Simon Glass
• [PATCH v3 07/13] sandbox: remove SCMI base node definition from test.dts   AKASHI Takahiro
• [PATCH v3 07/16] remoteproc: k3-dsp: Extend support for C71x DSPs on J784S4 SoCs   Apurva Nandan
• [PATCH v3 07/16] remoteproc: k3-dsp: Extend support for C71x DSPs on J784S4 SoCs   Roger Quadros
• [PATCH v3 07/16] remoteproc: k3-dsp: Extend support for C71x DSPs on J784S4 SoCs   Apurva Nandan
• [PATCH v3 07/20] test: Move POST under a renamed Testing section   Simon Glass
• [PATCH v3 07/27] moveconfig: Drop suspicious boards   Simon Glass
• [PATCH v3 07/38] spl: Drop the switch() statement for OS selection   Simon Glass
• [PATCH v3 08/13] firmware: scmi: fake base protocol commands on sandbox   AKASHI Takahiro
• [PATCH v3 08/16] board: ti: j784s4: Add board support for J784S4 EVM   Apurva Nandan
• [PATCH v3 08/16] board: ti: j784s4: Add board support for J784S4 EVM   Roger Quadros
• [PATCH v3 08/16] board: ti: j784s4: Add board support for J784S4 EVM   Roger Quadros
• [PATCH v3 08/16] board: ti: j784s4: Add board support for J784S4 EVM   Marcel Ziswiler
• [PATCH v3 08/16] board: ti: j784s4: Add board support for J784S4 EVM   Apurva Nandan
• [PATCH v3 08/16] board: ti: j784s4: Add board support for J784S4 EVM   Apurva Nandan
• [PATCH v3 08/20] boot: Move fdt_support to boot/   Simon Glass
• [PATCH v3 08/27] moveconfig: Correct some regular-expression strings   Simon Glass
• [PATCH v3 08/38] spl: Create proper symbols for enabling the malloc() pool   Simon Glass
• [PATCH v3 08/38] spl: Create proper symbols for enabling the malloc() pool   Tom Rini
• [PATCH v3 09/13] test: dm: simplify SCMI unit test on sandbox   AKASHI Takahiro
• [PATCH v3 09/16] arm: dts: Introduce j784s4 u-boot dts files   Apurva Nandan
• [PATCH v3 09/16] arm: dts: Introduce j784s4 u-boot dts files   Marcel Ziswiler
• [PATCH v3 09/20] Move fdt_simplefb to boot/   Simon Glass
• [PATCH v3 09/27] moveconfig: Correct parameter-type warnings   Simon Glass
• [PATCH v3 09/38] spl: Enable CONFIG_SPL_SYS_MALLOC_F where needed   Simon Glass
• [PATCH v3 1/2] arm: mach-k3: j7200: Add mcu_timer0 id to the dev list   Reid Tonking
• [PATCH v3 1/2] arm: mach-k3: j7200: Add mcu_timer0 id to the dev list   Reid Tonking
• [PATCH V3 1/2] configs: andes: add vender prefix for target name   Randolph
• [PATCH v3 1/2] Reland "x86: Move FACP table into separate functions""   Simon Glass
• [PATCH v3 1/2] Reland "x86: Move FACP table into separate functions""   Bin Meng
• [PATCH v3 1/2] schemas: Add a schema for memory map   Simon Glass
• [PATCH v3 1/2] schemas: Add a schema for memory map   Ard Biesheuvel
• [PATCH v3 1/2] schemas: Add a schema for memory map   Simon Glass
• [PATCH v3 1/2] schemas: Add a schema for memory map   Ard Biesheuvel
• [PATCH v3 1/2] schemas: Add a schema for memory map   Simon Glass
• [PATCH v3 1/2] tools: mkimage: Add StarFive SPL image support   Heinrich Schuchardt
• [PATCH v3 1/2] x86: coreboot: Update cbmem table   Bin Meng
• [PATCH v3 1/3] power: domain: ti: Enable single config for power domain   Udit Kumar
• [PATCH v3 1/3] riscv: bootstage: correct bootstage_report guard   Chanho Park
• [PATCH v3 1/4] common: Only mark malloc initialized after mem_malloc_init   Sean Anderson
• [PATCH v3 1/4] spl: fit: support for booting a GZIP-compressed U-boot binary   Manoj Sai
• [PATCH v3 1/4] sunxi: psci: clean away preprocessor macros   Sam Edwards
• [PATCH v3 1/5] fdt: common API to populate kaslr seed   seanedmond at linux.microsoft.com
• [PATCH v3 1/5] fdt: common API to populate kaslr seed   Simon Glass
• [PATCH v3 1/6] arm: mach-k3: j721e: dev-data: Add mcu_timer0 ID   Neha Malcom Francis
• [PATCH v3 1/6] arm: mach-k3: j721e: dev-data: Add mcu_timer0 ID   Nishanth Menon
• [PATCH v3 1/6] configs: j721s2_evm_r5_defconfig: Increase malloc pool size in DRAM   Manorit Chawdhry
• [PATCH v3 1/7] net: wget: prevent overwriting reserved memory   Masahisa Kojima
• [PATCH v3 1/7] net: wget: prevent overwriting reserved memory   Simon Glass
• [PATCH v3 1/7] rng: stm32: rename STM32 RNG driver   Gatien Chevallier
• [PATCH v3 1/7] rng: stm32: rename STM32 RNG driver   Patrice CHOTARD
• [PATCH v3 1/7] rng: stm32: rename STM32 RNG driver   Patrice CHOTARD
• [PATCH v3 1/7] scripts: Port Linux's gen_compile_commands.py to U-Boot   Joao Marcos Costa
• [PATCH v3 1/8] drivers: introduce Secure Monitor uclass   Alexey Romanov
• [PATCH v3 10/13] test: dm: add SCMI base protocol test   AKASHI Takahiro
• [PATCH v3 10/16] arm: dts: Introduce am69-sk dts from linux kernel   Apurva Nandan
• [PATCH v3 10/16] arm: dts: Introduce am69-sk dts from linux kernel   Marcel Ziswiler
• [PATCH v3 10/16] arm: dts: Introduce am69-sk dts from linux kernel   Nishanth Menon
• [PATCH v3 10/20] boot: Move some other fdt-fixup options to the same menu   Simon Glass
• [PATCH v3 10/27] moveconfig: Use f strings where possible   Simon Glass
• [PATCH v3 10/38] tpl: Enable CONFIG_TPL_SYS_MALLOC_F where needed   Simon Glass
• [PATCH v3 11/13] cmd: add scmi command for SCMI firmware   AKASHI Takahiro
• [PATCH v3 11/16] board: ti: j784s4: Add support for board detection by EEPROM read   Apurva Nandan
• [PATCH v3 11/16] board: ti: j784s4: Add support for board detection by EEPROM read   Nishanth Menon
• [PATCH v3 11/16] board: ti: j784s4: Add support for board detection by EEPROM read   Andrew Davis
• [PATCH v3 11/16] board: ti: j784s4: Add support for board detection by EEPROM read   Nishanth Menon
• [PATCH v3 11/16] board: ti: j784s4: Add support for board detection by EEPROM read   Andrew Davis
• [PATCH v3 11/16] board: ti: j784s4: Add support for board detection by EEPROM read   Nishanth Menon
• [PATCH v3 11/20] boot: Rename Android-boot text   Simon Glass
• [PATCH v3 11/27] moveconfig: Correct unused variables   Simon Glass
• [PATCH v3 11/38] spl: Use SYS_MALLOC_F instead of SYS_MALLOC_F_LEN   Simon Glass
• [PATCH v3 12/13] doc: cmd: add documentation for scmi   AKASHI Takahiro
• [PATCH v3 12/16] board: ti: j784s4: Update env to use am69-sk dtb   Apurva Nandan
• [PATCH v3 12/20] Kconfig: Create a menu for FIT   Simon Glass
• [PATCH v3 12/27] moveconfig: Correct non-snake variables names   Simon Glass
• [PATCH v3 12/38] Tidy up uses of CONFIG_SYS_MALLOC_F_LEN   Simon Glass
• [PATCH v3 13/13] test: dm: add scmi command test   AKASHI Takahiro
• [PATCH v3 13/13] test: dm: add scmi command test   Etienne CARRIERE
• [PATCH v3 13/13] test: dm: add scmi command test   AKASHI Takahiro
• [PATCH v3 13/16] arm: dts: Introduce am69-sk u-boot dts files   Apurva Nandan
• [PATCH v3 13/16] arm: dts: Introduce am69-sk u-boot dts files   Marcel Ziswiler
• [PATCH v3 13/16] arm: dts: Introduce am69-sk u-boot dts files   Nishanth Menon
• [PATCH v3 13/20] Kconfig: Move SPL_FIT under FIT   Simon Glass
• [PATCH v3 13/27] moveconfig: Correct use of members not declared in __init__()   Simon Glass
• [PATCH v3 13/38] doc: Clean up SYS_MALLOC_SIMPLE   Simon Glass
• [PATCH v3 14/16] arm: dts: k3-j784s4-binman: Add support for AM69 SK   Apurva Nandan
• [PATCH v3 14/20] spl: Tidy up load address in spl_ram   Simon Glass
• [PATCH v3 14/27] moveconfig: Correct list-comprehension warnings   Simon Glass
• [PATCH v3 14/38] dm: core: Correct help in TPL_DM and VPL_DM   Simon Glass
• [PATCH v3 15/16] configs: j784s4_evm: Add defconfig for j784s4 evm and am69 sk   Apurva Nandan
• [PATCH v3 15/20] boot: Make standard boot a menu   Simon Glass
• [PATCH v3 15/27] moveconfig: Use an encoding with open()   Simon Glass
• [PATCH v3 15/38] spl: Avoid an #ifdef when printing gd->malloc_ptr   Simon Glass
• [PATCH v3 16/16] doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation   Apurva Nandan
• [PATCH v3 16/16] doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation   Roger Quadros
• [PATCH v3 16/16] doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation   Marcel Ziswiler
• Re: [PATCH v3 16/16] doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation   Heinrich Schuchardt
• [PATCH v3 16/16] doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation   Apurva Nandan
• [PATCH v3 16/20] Kconfig: Move TEXT_BASE et al under general setup   Simon Glass
• [PATCH v3 16/27] moveconfig: Fix misc pylint warnings   Simon Glass
• [PATCH v3 16/38] spl: Remove #ifdefs with BOOTSTAGE   Simon Glass
• [PATCH v3 16/38] spl: Remove #ifdefs with BOOTSTAGE   Tom Rini
• [PATCH v3 17/20] Mark DISTRO_DEFAULTS as deprecated   Simon Glass
• [PATCH v3 17/27] moveconfig: Only show output when there is a reason   Simon Glass
• [PATCH v3 17/38] spl: Rename spl_load_fit_image() to load_simple_fit()   Simon Glass
• [PATCH v3 18/20] boot: Join FDT_FIXUP_PARTITIONS with related options   Simon Glass
• [PATCH v3 18/27] moveconfig: Reduce the amount of output   Simon Glass
• [PATCH v3 18/38] spl: Move the full FIT code to spl_fit.c   Simon Glass
• [PATCH v3 19/20] boot: Drop CMD_MTDPARTS condition for FDT_FIXUP_PARTITIONS   Simon Glass
• [PATCH v3 19/27] moveconfig: Avoid showing progress at the end   Simon Glass
• [PATCH v3 19/38] spl: Use the correct FIT_..._PROP constants   Simon Glass
• [PATCH v3 2/2] arm: dts: j7200: dts sync with Linux 6.6-rc1   Reid Tonking
• [PATCH v3 2/2] arm: dts: j7200: dts sync with Linux 6.6-rc1   Reid Tonking
• [PATCH V3 2/2] configs: andes: rearrange SPL mode memory layout   Randolph
• [PATCH V3 2/2] configs: andes: rearrange SPL mode memory layout   Leo Liang
• [PATCH v3 2/2] riscv: dts: starfive: generate u-boot-spl.bin.normal.out   Heinrich Schuchardt
• [PATCH v3 2/2] riscv: dts: starfive: generate u-boot-spl.bin.normal.out   Milan P. Stanić
• [PATCH v3 2/2] x86: Prevent from missing the FADT chaining   Simon Glass
• [PATCH v3 2/2] x86: Prevent from missing the FADT chaining   Bin Meng
• [PATCH v3 2/2] x86: Update cbmem driver   Bin Meng
• [PATCH v3 2/3] clk: ti: Add support to enable configs conditionally   Udit Kumar
• [PATCH v3 2/3] riscv: timer: add timer_get_boot_us for BOOTSTAGE   Chanho Park
• [PATCH v3 2/4] malloc: Don't use ifdefs for SYS_MALLOC_DEFAULT_TO_INIT   Sean Anderson
• [PATCH v3 2/4] spl: fit: support for booting a LZMA-compressed U-boot binary   Manoj Sai
• [PATCH v3 2/4] sunxi: psci: refactor register access to separate functions   Sam Edwards
• [PATCH v3 2/5] fdt: kaslr seed from RNG device   seanedmond at linux.microsoft.com
• [PATCH v3 2/5] fdt: kaslr seed from RNG device   Simon Glass
• [PATCH v3 2/6] arm: mach-k3: j721e_init: Move clk_k3 probe before loading TIFS   Neha Malcom Francis
• [PATCH v3 2/6] arm: mach-k3: j721e_init: Move clk_k3 probe before loading TIFS   Nishanth Menon
• [PATCH v3 2/6] arm: mach-k3: j721s2: Add mcu_timer0 id to the dev list   Manorit Chawdhry
• [PATCH v3 2/7] configs: default activate CONFIG_RNG_STM32 for STM32MP13x platforms   Gatien Chevallier
• [PATCH v3 2/7] configs: default activate CONFIG_RNG_STM32 for STM32MP13x platforms   Patrice CHOTARD
• [PATCH v3 2/7] net: wget: add wget with dns utility function   Masahisa Kojima
• [PATCH v3 2/7] net: wget: add wget with dns utility function   Simon Glass
• [PATCH v3 2/7] net: wget: add wget with dns utility function   Masahisa Kojima
• [PATCH v3 2/7] scripts/gen_compile_commands.py: adapt _LINE_PATTERN   Joao Marcos Costa
• [PATCH v3 2/8] sandbox: add sandbox sm uclass driver   Alexey Romanov
• [PATCH v3 20/20] boot: Join ARCH_FIXUP_FDT_MEMORY with related options   Simon Glass
• [PATCH v3 20/27] moveconfig: Use u_boot_pylib for terminal colour   Simon Glass
• [PATCH v3 20/38] spl: Move bloblist writing until the image is known   Simon Glass
• [PATCH v3 21/27] moveconfig: Show failures in progress   Simon Glass
• [PATCH v3 21/38] dm: core: Reverse the argument order in ofnode_copy_props()   Simon Glass
• [PATCH v3 22/27] moveconfig: Show a summary at the end   Simon Glass
• [PATCH v3 22/38] dm: core: Ensure we run flattree tests on ofnode   Simon Glass
• [PATCH v3 23/27] moveconfig: Drop the initial output   Simon Glass
• [PATCH v3 23/38] dm: core: Tidy up comments in the ofnode tests   Simon Glass
• [PATCH v3 24/27] moveconfig: Move summaries to the end   Simon Glass
• [PATCH v3 24/38] dm: core: Add a function to create an empty tree   Simon Glass
• [PATCH v3 25/27] moveconfig: Rename the tool to qconfig   Simon Glass
• [PATCH v3 25/38] dm: core: Add a way to copy a node   Simon Glass
• [PATCH v3 26/27] qconfig: Rename the database file   Simon Glass
• [PATCH v3 26/38] dm: core: Add a way to delete a node   Simon Glass
• [PATCH v3 27/27] qconfig: Update the documentation   Simon Glass
• [PATCH v3 27/38] dm: core: Add a way to convert a devicetree to a dtb   Simon Glass
• [PATCH v3 28/38] dm: core: Support writing a boolean   Simon Glass
• [PATCH v3 29/38] dm: core: Support writing a 64-bit value   Simon Glass
• [PATCH v3 3/3] config: j7200: remove not needed power config   Udit Kumar
• [PATCH v3 3/3] config: j7200: remove not needed power config   Nishanth Menon
• [PATCH v3 3/3] timer: riscv_aclint_timer: add timer_get_boot_us for BOOTSTAGE   Chanho Park
• [PATCH v3 3/3] timer: riscv_aclint_timer: add timer_get_boot_us for BOOTSTAGE   Heinrich Schuchardt
• [PATCH v3 3/3] timer: riscv_aclint_timer: add timer_get_boot_us for BOOTSTAGE   Chanho Park
• [PATCH v3 3/4] malloc: Don't statically initialize av_ if using malloc_init   Sean Anderson
• [PATCH v3 3/4] rockchip: Add support to generate GZIP compressed U-boot binary   Manoj Sai
• [PATCH v3 3/4] sunxi: psci: stop modeling register layout with C structs   Sam Edwards
• [PATCH v3 3/5] cmd: kaslrseed: Use common API to fixup FDT   seanedmond at linux.microsoft.com
• [PATCH v3 3/5] cmd: kaslrseed: Use common API to fixup FDT   Simon Glass
• [PATCH v3 3/6] drivers: firmware: ti_sci: Get SCI revision only if TIFS/SYSFW is up   Neha Malcom Francis
• [PATCH v3 3/6] drivers: firmware: ti_sci: Get SCI revision only if TIFS/SYSFW is up   Nishanth Menon
• [PATCH v3 3/6] k3-j721s2: Sync from Linux tag v6.5-rc1   Manorit Chawdhry
• [PATCH v3 3/6] k3-j721s2: Sync from Linux tag v6.5-rc1   Nishanth Menon
• [PATCH v3 3/6] k3-j721s2: Sync from Linux tag v6.5-rc1   Nishanth Menon
• [PATCH v3 3/7] blk: blkmap: add ramdisk creation utility function   Masahisa Kojima
• [PATCH v3 3/7] rng: stm32: Implement configurable RNG clock error detection   Gatien Chevallier
• [PATCH v3 3/7] rng: stm32: Implement configurable RNG clock error detection   Patrice CHOTARD
• [PATCH v3 3/7] scripts/gen_compile_commands.py: fix docstring   Joao Marcos Costa
• [PATCH v3 3/8] sandbox: dts: add meson secure monitor node   Alexey Romanov
• [PATCH v3 30/38] dm: core: Add tests for oftree_path()   Simon Glass
• [PATCH v3 31/38] sandbox: Move reading the RAM buffer into a better place   Simon Glass
• [PATCH v3 32/38] sandbox: Init the EC properly even if no state file is available   Simon Glass
• [PATCH v3 33/38] sandbox: Only read the state if we have a state file   Simon Glass
• [PATCH v3 34/38] sandbox: Move the bloblist down a little in memory   Simon Glass
• [PATCH v3 35/38] bloblist: Support initing from multiple places   Simon Glass
• [PATCH v3 36/38] fdt: Allow the devicetree to come from a bloblist   Simon Glass
• [PATCH v3 37/38] command: Include a required header in command.h   Simon Glass
• [PATCH v3 38/38] pci: serial: Support reading PCI-register size with base   Simon Glass
• [PATCH v3 38/38] pci: serial: Support reading PCI-register size with base   Tom Rini
• [PATCH v3 38/38] pci: serial: Support reading PCI-register size with base   Simon Glass
• [PATCH v3 38/38] pci: serial: Support reading PCI-register size with base   Tom Rini
• [PATCH v3 4/4] malloc: Enable SYS_MALLOC_RUNTIME_INIT by default in SPL   Sean Anderson
• [PATCH v3 4/4] rockchip: Add support to generate LZMA compressed U-boot binary   Manoj Sai
• [PATCH v3 4/4] sunxi: psci: implement PSCI on R528   Sam Edwards
• [PATCH v3 4/5] dm: core: Modify default for OFNODE_MULTI_TREE   seanedmond at linux.microsoft.com
• [PATCH v3 4/5] dm: core: Modify default for OFNODE_MULTI_TREE   Simon Glass
• [PATCH v3 4/6] configs: j721e: Remove HBMC_AM654 config   Neha Malcom Francis
• [PATCH v3 4/6] k3-am68: Sync from Linux tag v6.5-rc1   Manorit Chawdhry
• [PATCH v3 4/6] k3-am68: Sync from Linux tag v6.5-rc1   Nishanth Menon
• [PATCH v3 4/7] efi_loader: support boot from URI device path   Masahisa Kojima
• [PATCH v3 4/7] rng: stm32: add RNG clock frequency restraint   Gatien Chevallier
• [PATCH v3 4/7] rng: stm32: add RNG clock frequency restraint   Patrice CHOTARD
• [PATCH v3 4/7] rng: stm32: add RNG clock frequency restraint   Patrice CHOTARD
• [PATCH v3 4/7] scripts/gen_compile_commands.py: add acknowledgments   Joao Marcos Costa
• [PATCH v3 4/8] sandbox: add tests for UCLASS_SM   Alexey Romanov
• [PATCH v3 5/5] fdt: Fix compile error for !OFNODE_MULTI_TREE   seanedmond at linux.microsoft.com
• [PATCH v3 5/5] fdt: Fix compile error for !OFNODE_MULTI_TREE   Simon Glass
• [PATCH v3 5/6] arm: dts: k3-j721e-r5: Clean up inclusion hierarchy   Neha Malcom Francis
• [PATCH v3 5/6] docs: board: ti: Add j721s2_evm documentation   Manorit Chawdhry
• [PATCH v3 5/6] docs: board: ti: Add j721s2_evm documentation   Nishanth Menon
• [PATCH v3 5/6] docs: board: ti: Add j721s2_evm documentation   Manorit Chawdhry
• [PATCH v3 5/7] .gitignore: add compile_commands.json   Joao Marcos Costa
• [PATCH v3 5/7] efi_loader: set EFI HTTP Boot download buffer as reserved   Masahisa Kojima
• [PATCH v3 5/7] rng: stm32: add error concealment sequence   Gatien Chevallier
• [PATCH v3 5/7] rng: stm32: add error concealment sequence   Patrice CHOTARD
• [PATCH v3 5/7] rng: stm32: add error concealment sequence   Patrice CHOTARD
• [PATCH v3 5/8] sandbox: defconfig: enable CONFIG_SM option   Alexey Romanov
• [PATCH v3 5/9] board: qualcomm: Add support for dragonboard845c   Simon Glass
• [PATCH v3 5/9] board_f: Fix corruption of relocaddr   Simon Glass
• [PATCH v3 5/9] board_f: Fix corruption of relocaddr   Devarsh Thakkar
• [PATCH v3 5/9] board_f: Fix corruption of relocaddr   Simon Glass
• [PATCH v3 5/9] board_f: Fix corruption of relocaddr   Devarsh Thakkar
• [PATCH v3 6/6] arm: dts: k3-j721e: Sync with v6.6-rc1   Neha Malcom Francis
• [PATCH v3 6/6] arm: dts: k3-j721e: Sync with v6.6-rc1   Nishanth Menon
• [PATCH v3 6/6] arm: dts: k3-j721e: Sync with v6.6-rc1   Neha Malcom Francis
• [PATCH v3 6/6] arm: dts: k3-j721e: Sync with v6.6-rc1   Manorit Chawdhry
• [PATCH v3 6/6] arm: dts: k3-j721e: Sync with v6.6-rc1   Neha Malcom Francis
• [PATCH v3 6/6] board: ti: j721s2: MAINTAINERS: Update the MAINTAINERS File.   Manorit Chawdhry
• [PATCH v3 6/7] cmd: efidebug: add uri device path   Masahisa Kojima
• [PATCH v3 6/7] doc: add documentation for gen_compile_commands.py   Joao Marcos Costa
• [PATCH v3 6/7] doc: add documentation for gen_compile_commands.py   Heinrich Schuchardt
• [PATCH v3 6/7] rng: stm32: Implement custom RNG configuration support   Gatien Chevallier
• [PATCH v3 6/7] rng: stm32: Implement custom RNG configuration support   Patrice CHOTARD
• [PATCH v3 6/8] drivers: introduce Meson Secure Monitor driver   Alexey Romanov
• [PATCH v3 7/7] ARM: dts: stm32: add RNG node for STM32MP13x platforms   Gatien Chevallier
• [PATCH v3 7/7] ARM: dts: stm32: add RNG node for STM32MP13x platforms   Patrice CHOTARD
• [PATCH v3 7/7] ARM: dts: stm32: add RNG node for STM32MP13x platforms   Patrice CHOTARD
• [PATCH v3 7/7] doc: add new section to build/tools   Joao Marcos Costa
• [PATCH v3 7/7] doc: add new section to build/tools   Heinrich Schuchardt
• [PATCH v3 7/7] doc: uefi: add HTTP Boot support   Masahisa Kojima
• [PATCH v3 7/8] arch: meson: sm: set correct order of the includes   Alexey Romanov
• [PATCH v3 8/8] arch: meson: use secure monitor driver   Alexey Romanov
• Aw: [PATCH v3] board: rockchip: Add Bananapi R2Pro Board   Frank Wunderlich
• Aw: [PATCH v3] board: rockchip: Add Bananapi R2Pro Board   Marek Vasut
• Aw: [PATCH v3] board: rockchip: Add Bananapi R2Pro Board   Frank Wunderlich
• Aw: [PATCH v3] board: rockchip: Add Bananapi R2Pro Board   Marek Vasut
• Aw: [PATCH v3] board: rockchip: Add Bananapi R2Pro Board   Jonas Karlman
• [PATCH v3] board: rockchip: Add Bananapi R2Pro Board   Jonas Karlman
• Aw: Re: [PATCH v3] board: rockchip: Add Bananapi R2Pro Board   Frank Wunderlich
• Aw: Re: [PATCH v3] board: rockchip: Add Bananapi R2Pro Board   Jonas Karlman
• [PATCH v3] bootstd: sata: Add bootstd support for ahci sata   Tony Dinh
• [PATCH v3] bootstd: sata: Add bootstd support for ahci sata   Simon Glass
• [PATCH v3] bootstd: sata: Add bootstd support for ahci sata   Tony Dinh
• [PATCH v3] clk: ti: Notify AVS driver upon setting clock rate   Udit Kumar
• [PATCH v3] clk: ti: Notify AVS driver upon setting clock rate   Nishanth Menon
• [PATCH v3] clk: ti: Notify AVS driver upon setting clock rate   Kumar, Udit
• [PATCH v3] dt-bindings: mtd: fixed-partitions: Add compression property   Simon Glass
• [PATCH v3] env: ti: ti_common.env: Fix get_overlaystring for FIT Image   Manorit Chawdhry
• [PATCH v3] env: ti: ti_common.env: Fix get_overlaystring for FIT Image   Andrew Davis
• [PATCH v3] env: ti: ti_common.env: Fix get_overlaystring for FIT Image   Tom Rini
• [PATCH v4 0/4] support for booting the compressed U-boot binary on Rockchip based ARM64 SOC's   Manoj Sai
• [PATCH v4 0/6] DTS Sync from v6.5-rc1 to u-boot   Manorit Chawdhry
• [PATCH v4 0/6] J721E DTS Sync with Kernel v6.6-rc1   Neha Malcom Francis
• [PATCH v4 0/8] Add EFI HTTP boot support   Masahisa Kojima
• [PATCH v4 00/13] firmware: scmi: add SCMI base protocol support   AKASHI Takahiro
• [PATCH v4 00/22] Kconfig: Tidy up some options   Simon Glass
• [PATCH v4 00/44] spl: Preparation for Universal Payload   Simon Glass
• [PATCH v4 01/13] scmi: refactor the code to hide a channel from devices   AKASHI Takahiro
• [PATCH v4 01/13] scmi: refactor the code to hide a channel from devices   Patrice CHOTARD
• [PATCH v4 01/13] scmi: refactor the code to hide a channel from devices   AKASHI Takahiro
• [PATCH v4 01/20] x86: coreboot: Add IDE and SATA   Bin Meng
• [PATCH v4 01/22] lib: rational: Move the Kconfigs into the correct place   Simon Glass
• [PATCH v4 01/44] configs: Resync with savedefconfig   Simon Glass
• [PATCH v4 02/13] firmware: scmi: implement SCMI base protocol   AKASHI Takahiro
• [PATCH v4 02/20] x86: coreboot: Enable standard boot   Bin Meng
• [PATCH v4 02/22] Kconfig: Move API into general setup   Simon Glass
• [PATCH v4 02/44] spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_...   Simon Glass
• [PATCH v4 03/13] firmware: scmi: move scmi_bind_protocols() backward   AKASHI Takahiro
• [PATCH v4 03/20] x86: coreboot: Rearrange arch_cpu_init()   Bin Meng
• [PATCH v4 03/22] video: Move bmp code to drivers/video   Simon Glass
• [PATCH v4 03/44] spl: Rename SYS_SPL_ARGS_ADDR to SPL_PAYLOAD_ARGS_ADDR   Simon Glass
• [PATCH v4 04/13] firmware: scmi: framework for installing additional protocols   AKASHI Takahiro
• [PATCH v4 04/20] x86: Set the CPU vendor in SPL   Bin Meng
• [PATCH v4 04/22] video: Move the BMP options   Simon Glass
• [PATCH v4 04/44] spl: Avoid #ifdef with CONFIG_SPL_SYS_MALLOC   Simon Glass
• [PATCH v4 05/13] firmware: scmi: fake base protocol commands on sandbox   AKASHI Takahiro
• [PATCH v4 05/20] x86: Allow APCI in SPL   Bin Meng
• [PATCH v4 05/22] video: Move BMP options and code to video directory   Simon Glass
• [PATCH v4 05/44] spl: mx6: powerpc: Drop the condition on timer_init()   Simon Glass
• [PATCH v4 05/44] spl: mx6: powerpc: Drop the condition on timer_init()   Christophe Leroy
• [PATCH v4 06/13] test: dm: simplify SCMI unit test on sandbox   AKASHI Takahiro
• [PATCH v4 06/20] x86: coreboot: Look for DBG2 UART in SPL too   Bin Meng
• [PATCH v4 06/22] FWU: Avoid showing an unselectable menu option   Simon Glass
• [PATCH v4 06/44] spl: Drop #ifdefs for BOARD_INIT and watchdog   Simon Glass
• [PATCH v4 07/13] firmware: scmi: install base protocol to SCMI agent   AKASHI Takahiro
• [PATCH v4 07/20] x86: coreboot: Enable CONFIG_SYS_NS16550_MEM32   Bin Meng
• [PATCH v4 07/20] x86: coreboot: Enable CONFIG_SYS_NS16550_MEM32   Simon Glass
• [PATCH v4 07/22] test: Move POST under a renamed Testing section   Simon Glass
• [PATCH v4 07/44] spl: Avoid #ifdef with CONFIG_SPL_PAYLOAD_ARGS_ADDR   Simon Glass
• [PATCH v4 08/13] firmware: scmi: add a check against availability of protocols   AKASHI Takahiro
• [PATCH v4 08/20] x86: coreboot: Drop USB init on startup   Bin Meng
• [PATCH v4 08/20] x86: coreboot: Drop USB init on startup   Simon Glass
• [PATCH v4 08/22] boot: Move fdt_support to boot/   Simon Glass
• [PATCH v4 08/44] spl: Drop the switch() statement for OS selection   Simon Glass
• [PATCH v4 09/13] sandbox: remove SCMI base node definition from test.dts   AKASHI Takahiro
• [PATCH v4 09/20] x86: coreboot: Align options between coreboot and coreboot64   Bin Meng
• [PATCH v4 09/22] Move fdt_simplefb to boot/   Simon Glass
• [PATCH v4 09/22] Move fdt_simplefb to boot/   Peter Robinson
• [PATCH v4 09/22] Move fdt_simplefb to boot/   Tom Rini
• [PATCH v4 09/44] serial: Drop mention of SPL/TPL_SYS_MALLOC_F   Simon Glass
• [PATCH v4 1/1] CI: add test/usage_of_is_enabled_check.sh   Troy Kisky
• [PATCH v4 1/1] CI: add test/usage_of_is_enabled_check.sh   Troy Kisky
• [PATCH v4 1/2] x86: coreboot: Document cbmem console struct   Simon Glass
• [PATCH v4 1/2] x86: coreboot: Document cbmem console struct   Bin Meng
• [PATCH v4 1/4] spl: fit: support for booting a GZIP-compressed U-boot binary   Manoj Sai
• [PATCH v4 1/4] spl: fit: support for booting a GZIP-compressed U-boot binary   Tom Rini
• [PATCH v4 1/6] arm: mach-k3: j721e: dev-data: Add mcu_timer0 ID   Neha Malcom Francis
• [PATCH v4 1/6] configs: j721s2_evm_r5_defconfig: Increase malloc pool size in DRAM   Manorit Chawdhry
• [PATCH v4 1/8] net: wget: prevent overwriting reserved memory   Masahisa Kojima
• [PATCH v4 1/8] net: wget: prevent overwriting reserved memory   Ilias Apalodimas
• [PATCH v4 10/13] test: dm: add SCMI base protocol test   AKASHI Takahiro
• [PATCH v4 10/20] x86: coreboot: Enable VIDEO_COPY   Bin Meng
• [PATCH v4 10/22] boot: Move some other fdt-fixup options to the same menu   Simon Glass
• [PATCH v4 10/44] spl: Create proper symbols for enabling the malloc() pool   Simon Glass
• [PATCH v4 11/13] cmd: add scmi command for SCMI firmware   AKASHI Takahiro
• [PATCH v4 11/20] efi: x86: Correct the condition for installing ACPI tables   Bin Meng
• [PATCH v4 11/22] boot: Rename Android-boot text   Simon Glass
• [PATCH v4 11/44] spl: Enable CONFIG_SPL_SYS_MALLOC_F where needed   Simon Glass
• [PATCH v4 12/13] doc: cmd: add documentation for scmi   AKASHI Takahiro
• [PATCH v4 12/20] x86: smbios: Add a Kconfig indicating SMBIOS-table presence   Bin Meng
• [PATCH v4 12/22] Kconfig: Create a menu for FIT   Simon Glass
• [PATCH v4 12/44] tpl: Enable CONFIG_TPL_SYS_MALLOC_F where needed   Simon Glass
• [PATCH v4 13/13] test: dm: add scmi command test   AKASHI Takahiro
• [PATCH v4 13/22] spl: Tidy up load address in spl_ram   Simon Glass
• [PATCH v4 13/44] spl: Use SYS_MALLOC_F instead of SYS_MALLOC_F_LEN   Simon Glass
• [PATCH v4 13/44] spl: Use SYS_MALLOC_F instead of SYS_MALLOC_F_LEN   Sean Anderson
• [PATCH v4 14/20] Record the position of the SMBIOS tables   Bin Meng
• [PATCH v4 14/22] spl: Drop SPL/TPL_RAM_SUPPORT option for SPL_LOAD_FIT_ADDRESS   Simon Glass
• [PATCH v4 14/44] Tidy up uses of CONFIG_SYS_MALLOC_F_LEN   Simon Glass
• [PATCH v4 15/22] Kconfig: Move SPL_FIT under FIT   Simon Glass
• [PATCH v4 15/44] doc: Clean up SYS_MALLOC_SIMPLE   Simon Glass
• [PATCH v4 16/20] x86: coreboot: Record the position of the SMBIOS tables   Bin Meng
• [PATCH v4 16/20] x86: coreboot: Record the position of the SMBIOS tables   Simon Glass
• [PATCH v4 16/22] boot: Make standard boot a menu   Simon Glass
• [PATCH v4 16/44] dm: core: Correct help in TPL_DM and VPL_DM   Simon Glass
• [PATCH v4 17/20] x86: doc: Move into its own directory   Bin Meng
• [PATCH v4 17/22] Kconfig: Move TEXT_BASE et al under general setup   Simon Glass
• [PATCH v4 17/44] spl: Avoid an #ifdef when printing gd->malloc_ptr   Simon Glass
• [PATCH v4 18/20] x86: doc: Update summaries and add links   Bin Meng
• [PATCH v4 18/22] Mark DISTRO_DEFAULTS as deprecated   Simon Glass
• [PATCH v4 18/44] spl: Remove #ifdefs with BOOTSTAGE   Simon Glass
• [PATCH v4 19/20] x86: doc: Split out manual booting into its own file   Bin Meng
• [PATCH v4 19/22] Make ARCH_FIXUP_FDT_MEMORY depend on OF_LIBFDT   Simon Glass
• [PATCH v4 19/44] spl: Rename spl_load_fit_image() to load_simple_fit()   Simon Glass
• [PATCH v4 2/2] x86: Update cbmem driver   Simon Glass
• [PATCH v4 2/2] x86: Update cbmem driver   Bin Meng
• [PATCH v4 2/2] x86: Update cbmem driver   Simon Glass
• [PATCH v4 2/2] x86: Update cbmem driver   Bin Meng
• [PATCH v4 2/4] spl: fit: support for booting a LZMA-compressed U-boot binary   Manoj Sai
• [PATCH v4 2/4] spl: fit: support for booting a LZMA-compressed U-boot binary   Tom Rini
• [PATCH v4 2/6] arm: mach-k3: j721e_init: Move clk_k3 probe before loading TIFS   Neha Malcom Francis
• [PATCH v4 2/6] arm: mach-k3: j721e_init: Move clk_k3 probe before loading TIFS   Manorit Chawdhry
• [PATCH v4 2/6] arm: mach-k3: j721s2: Add mcu_timer0 id to the dev list   Manorit Chawdhry
• [PATCH v4 2/8] net: wget: add wget with dns utility function   Masahisa Kojima
• [PATCH v4 2/8] net: wget: add wget with dns utility function   Ilias Apalodimas
• [PATCH v4 20/20] x86: doc: coreboot: Mention 64-bit Linux distros   Bin Meng
• [PATCH v4 20/22] boot: Join FDT_FIXUP_PARTITIONS with related options   Simon Glass
• [PATCH v4 20/44] spl: Move the full FIT code to spl_fit.c   Simon Glass
• [PATCH v4 21/22] boot: Drop CMD_MTDPARTS condition for FDT_FIXUP_PARTITIONS   Simon Glass
• [PATCH v4 21/44] spl: Use the correct FIT_..._PROP constants   Simon Glass
• [PATCH v4 22/22] boot: Join ARCH_FIXUP_FDT_MEMORY with related options   Simon Glass
• [PATCH v4 22/44] spl: Move bloblist writing until the image is known   Simon Glass
• [PATCH v4 23/44] dm: core: Reverse the argument order in ofnode_copy_props()   Simon Glass
• [PATCH v4 24/44] dm: core: Ensure we run flattree tests on ofnode   Simon Glass
• [PATCH v4 25/44] dm: core: Tidy up comments in the ofnode tests   Simon Glass
• [PATCH v4 26/44] dm: core: Add a function to create an empty tree   Simon Glass
• [PATCH v4 27/44] dm: core: Add a way to copy a node   Simon Glass
• [PATCH v4 28/44] dm: core: Add a way to delete a node   Simon Glass
• [PATCH v4 29/44] dm: core: Add a way to convert a devicetree to a dtb   Simon Glass
• [PATCH v4 3/4] rockchip: Add support to generate GZIP compressed U-boot binary   Manoj Sai
• [PATCH v4 3/6] drivers: firmware: ti_sci: Get SCI revision only if TIFS/SYSFW is up   Neha Malcom Francis
• [PATCH v4 3/6] k3-j721s2: Sync from Linux tag v6.5-rc1   Manorit Chawdhry
• [PATCH v4 3/8] blk: blkmap: add ramdisk creation utility function   Masahisa Kojima
• [PATCH v4 3/8] blk: blkmap: add ramdisk creation utility function   Ilias Apalodimas
• [PATCH v4 30/44] dm: core: Support writing a boolean   Simon Glass
• [PATCH v4 31/44] dm: core: Support writing a 64-bit value   Simon Glass
• [PATCH v4 32/44] dm: core: Add tests for oftree_path()   Simon Glass
• [PATCH v4 32/45] fs: fat: Support reading from a larger block size   Simon Glass
• [PATCH v4 33/44] sandbox: Move reading the RAM buffer into a better place   Simon Glass
• [PATCH v4 34/44] sandbox: Init the EC properly even if no state file is available   Simon Glass
• [PATCH v4 35/44] sandbox: Only read the state if we have a state file   Simon Glass
• [PATCH v4 36/44] sandbox: Move the bloblist down a little in memory   Simon Glass
• [PATCH v4 37/44] bloblist: Support initing from multiple places   Simon Glass
• [PATCH v4 38/44] bloblist: Add missing name   Simon Glass
• [PATCH v4 39/44] fdt: Allow the devicetree to come from a bloblist   Simon Glass
• [PATCH v4 4/4] memory: Add ECC property   Lean Sheng Tan
• [PATCH v4 4/4] memory: Add ECC property   Simon Glass
• [PATCH v4 4/4] rockchip: Add support to generate LZMA compressed U-boot binary   Manoj Sai
• [PATCH v4 4/6] configs: j721e: Remove HBMC_AM654 config   Neha Malcom Francis
• [PATCH v4 4/6] k3-am68: Sync from Linux tag v6.5-rc1   Manorit Chawdhry
• [PATCH v4 4/8] efi_loader: support boot from URI device path   Masahisa Kojima
• [PATCH v4 4/8] efi_loader: support boot from URI device path   Ilias Apalodimas
• [PATCH v4 4/8] efi_loader: support boot from URI device path   Masahisa Kojima
• [PATCH v4 4/8] efi_loader: support boot from URI device path   Maxim Uvarov
• [PATCH v4 4/8] efi_loader: support boot from URI device path   Masahisa Kojima
• [PATCH v4 4/8] efi_loader: support boot from URI device path   Maxim Uvarov
• [PATCH v4 4/8] efi_loader: support boot from URI device path   Masahisa Kojima
• [PATCH v4 4/8] efi_loader: support boot from URI device path   Maxim Uvarov
• [PATCH v4 40/44] command: Include a required header in command.h   Simon Glass
• [PATCH v4 41/44] spl: Add C-based runtime detection of SPL   Simon Glass
• [PATCH v4 42/44] serial: Drop ns16550 serial_getinfo() in SPL   Simon Glass
• [PATCH v4 43/44] dm: core: Tweak device_is_on_pci_bus() for code size   Simon Glass
• [PATCH v4 44/44] pci: serial: Support reading PCI-register size with base   Simon Glass
• [PATCH v4 5/6] arm: dts: k3-j721e-r5: Clean up inclusion hierarchy   Neha Malcom Francis
• [PATCH v4 5/6] docs: board: ti: Add j721s2_evm documentation   Manorit Chawdhry
• [PATCH v4 5/6] docs: board: ti: Add j721s2_evm documentation   Nishanth Menon
• [PATCH v4 5/6] docs: board: ti: Add j721s2_evm documentation   Apurva Nandan
• [PATCH v4 5/8] efi_loader: set EFI HTTP Boot download buffer as reserved   Masahisa Kojima
• [PATCH v4 5/8] efi_loader: set EFI HTTP Boot download buffer as reserved   Ilias Apalodimas
• [PATCH v4 5/8] efi_loader: set EFI HTTP Boot download buffer as reserved   Masahisa Kojima
• [PATCH v4 6/6] arm: dts: k3-j721e: Sync with v6.6-rc1   Neha Malcom Francis
• [PATCH v4 6/6] arm: dts: k3-j721e: Sync with v6.6-rc1   Manorit Chawdhry
• [PATCH v4 6/6] board: ti: j721s2: MAINTAINERS: Update the MAINTAINERS File.   Manorit Chawdhry
• [PATCH v4 6/6] board: ti: j721s2: MAINTAINERS: Update the MAINTAINERS File.   Nishanth Menon
• [PATCH v4 6/6] board: ti: j721s2: MAINTAINERS: Update the MAINTAINERS File.   Manorit Chawdhry
• [PATCH v4 6/8] cmd: efidebug: add uri device path   Masahisa Kojima
• [PATCH v4 7/8] doc: uefi: add HTTP Boot support   Masahisa Kojima
• [PATCH v4 7/8] doc: uefi: add HTTP Boot support   Ilias Apalodimas
• [PATCH v4 7/8] doc: uefi: add HTTP Boot support   Masahisa Kojima
• [PATCH v4 8/8] efi_loader: create BlockIo device boot option   Masahisa Kojima
• [PATCH v4] board: rockchip: Add Bananapi R2Pro Board   Frank Wunderlich
• [PATCH v4] board: rockchip: Add Bananapi R2Pro Board   Mark Kettenis
• [PATCH v4] board: rockchip: Add Bananapi R2Pro Board   Frank Wunderlich
• [PATCH v4] board: rockchip: Add Bananapi R2Pro Board   Mark Kettenis
• [PATCH v4] board: rockchip: Add Bananapi R2Pro Board   Frank Wunderlich
• [PATCH v4] board: rockchip: Add Bananapi R2Pro Board   Jonas Karlman
• Aw: Re: [PATCH v4] board: rockchip: Add Bananapi R2Pro Board   Frank Wunderlich
• [PATCH v4] bootstd: sata: Add bootstd support for ahci sata   Tony Dinh
• [PATCH v4] bootstd: sata: Add bootstd support for ahci sata   Simon Glass
• [PATCH v4] clk: ti: clk-k3: Notify AVS driver upon setting clock rate   Udit Kumar
• [PATCH v4] dt-bindings: mtd: fixed-partitions: Add compression property   Simon Glass
• [PATCH v5 0/7] Add EFI HTTP boot support   Masahisa Kojima
• [PATCH v5 00/16] firmware: scmi: add SCMI base protocol support   AKASHI Takahiro
• [PATCH v5 00/20] x86: efi: Fixes and improvements for coreboot   Simon Glass
• [PATCH v5 00/20] x86: efi: Fixes and improvements for coreboot   Bin Meng
• [PATCH v5 00/20] x86: efi: Fixes and improvements for coreboot   Bin Meng
• [PATCH v5 00/20] x86: efi: Fixes and improvements for coreboot   Simon Glass
• [PATCH v5 00/21] Kconfig: Tidy up some options   Simon Glass
• [PATCH v5 00/21] Kconfig: Tidy up some options   Tom Rini
• [PATCH v5 00/21] Kconfig: Tidy up some options   Tom Rini
• [PATCH v5 01/16] scmi: refactor the code to hide a channel from devices   AKASHI Takahiro
• [PATCH v5 01/20] x86: coreboot: Add IDE and SATA   Simon Glass
• [PATCH v5 01/21] lib: rational: Move the Kconfigs into the correct place   Simon Glass
• [PATCH v5 02/16] firmware: scmi: use a protocol's own channel if assigned   AKASHI Takahiro
• [PATCH v5 02/20] x86: coreboot: Enable standard boot   Simon Glass
• [PATCH v5 02/21] Kconfig: Move API into general setup   Simon Glass
• [PATCH v5 03/16] firmware: scmi: support dummy channels for sandbox agent   AKASHI Takahiro
• [PATCH v5 03/20] x86: coreboot: Rearrange arch_cpu_init()   Simon Glass
• [PATCH v5 03/21] video: Move bmp code to drivers/video   Simon Glass
• [PATCH v5 04/16] test: dm: add protocol-specific channel test   AKASHI Takahiro
• [PATCH v5 04/20] x86: Set the CPU vendor in SPL   Simon Glass
• [PATCH v5 04/21] video: Move the BMP options   Simon Glass
• [PATCH v5 05/11] spl: Convert mmc to spl_load   Jonas Karlman
• [PATCH v5 05/11] spl: Convert mmc to spl_load   Xavier Drudis Ferran
• [PATCH v5 05/11] spl: Convert mmc to spl_load   Sean Anderson
• [PATCH v5 05/11] spl: Convert mmc to spl_load   Xavier Drudis Ferran
• [PATCH v5 05/16] firmware: scmi: implement SCMI base protocol   AKASHI Takahiro
• [PATCH v5 05/20] x86: Allow APCI in SPL   Simon Glass
• [PATCH v5 05/21] FWU: Avoid showing an unselectable menu option   Simon Glass
• [PATCH v5 05/21] FWU: Avoid showing an unselectable menu option   Ilias Apalodimas
• [PATCH v5 06/16] firmware: scmi: move scmi_bind_protocols() backward   AKASHI Takahiro
• [PATCH v5 06/20] x86: coreboot: Look for DBG2 UART in SPL too   Simon Glass
• [PATCH v5 06/21] test: Move POST under a renamed Testing section   Simon Glass
• [PATCH v5 07/16] firmware: scmi: framework for installing additional protocols   AKASHI Takahiro
• [PATCH v5 07/20] x86: coreboot: Enable CONFIG_SYS_NS16550_MEM32   Simon Glass
• [PATCH v5 07/20] x86: coreboot: Enable CONFIG_SYS_NS16550_MEM32   Bin Meng
• [PATCH v5 07/21] boot: Move fdt_support to boot/   Simon Glass
• [PATCH v5 08/16] firmware: scmi: fake base protocol commands on sandbox   AKASHI Takahiro
• [PATCH v5 08/20] x86: coreboot: Drop USB init on startup   Simon Glass
• [PATCH v5 08/20] x86: coreboot: Drop USB init on startup   Heinrich Schuchardt
• [PATCH v5 08/20] x86: coreboot: Drop USB init on startup   Marek Vasut
• [PATCH v5 08/20] x86: coreboot: Drop USB init on startup   Heinrich Schuchardt
• [PATCH v5 08/20] x86: coreboot: Drop USB init on startup   Bin Meng
• [PATCH v5 08/21] Move fdt_simplefb to boot/   Simon Glass
• [PATCH v5 09/11] spl: Convert semihosting to spl_load   Heinrich Schuchardt
• [PATCH v5 09/16] test: dm: simplify SCMI unit test on sandbox   AKASHI Takahiro
• [PATCH v5 09/20] x86: coreboot: Align options between coreboot and coreboot64   Simon Glass
• [PATCH v5 09/21] boot: Move some other fdt-fixup options to the same menu   Simon Glass
• [PATCH v5 1/2] dm: core: ofnode: Add ofnode_read_bootscript_address()   Michal Simek
• [PATCH v5 1/4] Add reserved-memory   Rob Herring
• [PATCH v5 1/7] net: wget: prevent overwriting reserved memory   Masahisa Kojima
• [PATCH v5 10/16] firmware: scmi: install base protocol to SCMI agent   AKASHI Takahiro
• [PATCH v5 10/20] x86: coreboot: Enable VIDEO_COPY   Simon Glass
• [PATCH v5 10/21] boot: Rename Android-boot text   Simon Glass
• [PATCH v5 10/21] boot: Rename Android-boot text   Mattijs Korpershoek
• [PATCH v5 11/16] firmware: scmi: add a check against availability of protocols   AKASHI Takahiro
• [PATCH v5 11/20] efi: x86: Correct the condition for installing ACPI tables   Simon Glass
• [PATCH v5 11/21] Kconfig: Create a menu for FIT   Simon Glass
• [PATCH v5 12/16] sandbox: remove SCMI base node definition from test.dts   AKASHI Takahiro
• [PATCH v5 12/20] x86: smbios: Add a Kconfig indicating SMBIOS-table presence   Simon Glass
• [PATCH v5 12/21] spl: Tidy up load address in spl_ram   Simon Glass
• [PATCH v5 13/16] test: dm: add SCMI base protocol test   AKASHI Takahiro
• [PATCH v5 13/20] bootstd: Keep track of use of usb stop   Simon Glass
• [PATCH v5 13/21] spl: Drop SPL/TPL_RAM_SUPPORT option for SPL_LOAD_FIT_ADDRESS   Simon Glass
• [PATCH v5 14/16] cmd: add scmi command for SCMI firmware   AKASHI Takahiro
• [PATCH v5 14/20] Record the position of the SMBIOS tables   Simon Glass
• [PATCH v5 14/21] Kconfig: Move SPL_FIT under FIT   Simon Glass
• [PATCH v5 15/16] doc: cmd: add documentation for scmi   AKASHI Takahiro
• [PATCH v5 15/20] efi: Use the installed SMBIOS tables   Simon Glass
• [PATCH v5 15/21] boot: Make standard boot a menu   Simon Glass
• [PATCH v5 16/16] test: dm: add scmi command test   AKASHI Takahiro
• [PATCH v5 16/20] x86: coreboot: Record the position of the SMBIOS tables   Simon Glass
• [PATCH v5 16/21] Kconfig: Move TEXT_BASE et al under general setup   Simon Glass
• [PATCH v5 17/20] x86: doc: Move into its own directory   Simon Glass
• [PATCH v5 17/21] Mark DISTRO_DEFAULTS as deprecated   Simon Glass
• [PATCH v5 18/20] x86: doc: Update summaries and add links   Simon Glass
• [PATCH v5 18/21] Make ARCH_FIXUP_FDT_MEMORY depend on OF_LIBFDT   Simon Glass
• [PATCH v5 19/20] x86: doc: Split out manual booting into its own file   Simon Glass
• [PATCH v5 19/21] boot: Join FDT_FIXUP_PARTITIONS with related options   Simon Glass
• [PATCH v5 2/7] net: wget: add wget with dns utility function   Masahisa Kojima
• [PATCH v5 20/20] x86: doc: coreboot: Mention 64-bit Linux distros   Simon Glass
• [PATCH v5 20/21] boot: Drop CMD_MTDPARTS condition for FDT_FIXUP_PARTITIONS   Simon Glass
• [PATCH v5 21/21] boot: Join ARCH_FIXUP_FDT_MEMORY with related options   Simon Glass
• [PATCH v5 3/4] schemas: Add some common reserved-memory usages   Ard Biesheuvel
• [PATCH v5 3/4] schemas: Add some common reserved-memory usages   Rob Herring
• [PATCH v5 3/4] schemas: Add some common reserved-memory usages   Simon Glass
• [PATCH v5 3/4] schemas: Add some common reserved-memory usages   Ard Biesheuvel
• [PATCH v5 3/4] schemas: Add some common reserved-memory usages   Simon Glass
• [PATCH v5 3/4] schemas: Add some common reserved-memory usages   Ard Biesheuvel
• [PATCH v5 3/4] schemas: Add some common reserved-memory usages   Simon Glass
• [PATCH v5 3/4] schemas: Add some common reserved-memory usages   Ard Biesheuvel
• [PATCH v5 3/4] schemas: Add some common reserved-memory usages   Simon Glass
• [PATCH v5 3/4] schemas: Add some common reserved-memory usages   Ard Biesheuvel
• [PATCH v5 3/4] schemas: Add some common reserved-memory usages   Rob Herring
• [PATCH v5 3/4] schemas: Add some common reserved-memory usages   Simon Glass
• [PATCH v5 3/4] schemas: Add some common reserved-memory usages   Ard Biesheuvel
• [PATCH v5 3/4] schemas: Add some common reserved-memory usages   Simon Glass
• [PATCH v5 3/7] blk: blkmap: add ramdisk creation utility function   Masahisa Kojima
• [PATCH v5 3/8] tests: gpt: Remove test order dependency   Tom Rini
• [PATCH v5 39/43] command: Include a required header in command.h   Simon Glass
• [PATCH v5 39/43] command: Include a required header in command.h   Mattijs Korpershoek
• [PATCH v5 4/4] memory: Add ECC properties   Rob Herring
• [PATCH v5 4/7] efi_loader: support boot from URI device path   Masahisa Kojima
• [PATCH v5 4/7] efi_loader: support boot from URI device path   Ilias Apalodimas
• [PATCH v5 4/7] efi_loader: support boot from URI device path   Masahisa Kojima
• [PATCH v5 4/7] efi_loader: support boot from URI device path   Ilias Apalodimas
• [PATCH v5 5/7] cmd: efidebug: add uri device path   Masahisa Kojima
• [PATCH v5 5/7] cmd: efidebug: add uri device path   Maxim Uvarov
• [PATCH v5 5/7] cmd: efidebug: add uri device path   Masahisa Kojima
• [PATCH v5 6/7] doc: uefi: add HTTP Boot support   Masahisa Kojima
• [PATCH v5 7/7] efi_loader: create BlockIo device boot option   Masahisa Kojima
• [PATCH v5] board: rockchip: Add Bananapi R2Pro Board   Frank Wunderlich
• [PATCH v5] board: rockchip: Add Bananapi R2Pro Board   Kever Yang
• [PATCH v5] imx: imx8mm: Add support for Mettler-Toledo snowflake board.   Manuel Traut
• [PATCH v6 0/2] Add support to fetch baudrate from dtb   Venkatesh Yadav Abbarapu
• [PATCH v6 0/7] J721S2 DTS Sync from v6.6-rc1 to u-boot   Manorit Chawdhry
• [PATCH V6 01/20] include: env: ti: mmc: envboot/mmcboot: Check result of mmc dev before proceeding   Tom Rini
• [PATCH v6 1/2] configs: Add support in Kconfig and convert for armada boards   Venkatesh Yadav Abbarapu
• [PATCH v6 1/2] configs: Add support in Kconfig and convert for armada boards   Simon Glass
• [PATCH v6 1/2] schemas: Add some common reserved-memory usages   Simon Glass
• [PATCH v6 1/2] schemas: Add some common reserved-memory usages   Simon Glass
• [PATCH v6 1/2] schemas: Add some common reserved-memory usages   Rob Herring
• [PATCH v6 1/2] schemas: Add some common reserved-memory usages   Simon Glass
• [PATCH v6 1/2] schemas: Add some common reserved-memory usages   Rob Herring
• [PATCH v6 1/2] schemas: Add some common reserved-memory usages   Simon Glass
• [PATCH v6 1/2] schemas: Add some common reserved-memory usages   Simon Glass
• [PATCH v6 1/7] configs: j721s2_evm_r5_defconfig: Increase malloc pool size in DRAM   Manorit Chawdhry
• [PATCH v6 13/20] bootstd: Keep track of use of usb stop   Simon Glass
• [PATCH v6 15/20] efi: Use the installed SMBIOS tables   Simon Glass
• [PATCH v6 2/2] schemas: memory: Add ECC properties   Simon Glass
• [PATCH v6 2/2] schemas: memory: Add ECC properties   Peter Robinson
• [PATCH v6 2/2] schemas: memory: Add ECC properties   Rob Herring
• [PATCH v6 2/2] schemas: memory: Add ECC properties   Simon Glass
• [PATCH v6 2/2] serial: zynqmp: Fetch baudrate from dtb and update   Venkatesh Yadav Abbarapu
• [PATCH v6 2/7] Revert "arm: dts: k3-j7*: ddr: Update to 0.10 version of DDR config tool"   Manorit Chawdhry
• [PATCH v6 3/4] riscv: cpu: jh7110: Imply SPL_SYS_MALLOC_CLEAR_ON_INIT   Leo Liang
• [PATCH v6 3/7] arm: mach-k3: j721s2: Add mcu_timer0 id to the dev list   Manorit Chawdhry
• [PATCH v6 4/4] configs: starfive: Disable SYS_MALLOC_CLEAR_ON_INIT by default   Leo Liang
• [PATCH v6 4/7] arm: dts: k3-j721s2: Sync from Linux tag v6.6-rc1   Manorit Chawdhry
• [PATCH v6 5/7] arm: dts: k3-am68: Sync from Linux tag v6.6-rc1   Manorit Chawdhry
• [PATCH v6 6/7] docs: board: ti: Add j721s2_evm documentation   Manorit Chawdhry
• [PATCH v6 7/7] board: ti: j721s2: MAINTAINERS: Update the MAINTAINERS File.   Manorit Chawdhry
• [PATCH v7 0/2] Add support to fetch baudrate from dtb   Venkatesh Yadav Abbarapu
• [PATCH v7 0/3] x86: efi: Fixes and improvements for coreboot   Simon Glass
• [PATCHv7 00/15] net/lwip: add lwip library for the network stack   Michal Simek
• [PATCHv7 00/15] net/lwip: add lwip library for the network stack   Maxim Uvarov
• [PATCHv7 00/15] net/lwip: add lwip library for the network stack   Tom Rini
• [PATCHv7 00/15] net/lwip: add lwip library for the network stack   Michal Simek
• [PATCHv7 02/15] net/lwip: integrate lwIP library   Michal Simek
• [PATCHv7 03/15] net/lwip: implement dns cmd   Maxim Uvarov
• [PATCHv7 03/15] net/lwip: implement dns cmd   Simon Glass
• [PATCHv7 03/15] net/lwip: implement dns cmd   Maxim Uvarov
• [PATCHv7 04/15] net/lwip: implement dhcp cmd   Maxim Uvarov
• [PATCH v7 1/2] configs: Add support in Kconfig and convert for armada boards   Venkatesh Yadav Abbarapu
• [PATCH v7 1/2] schemas: memory: Add ECC properties   Simon Glass
• [PATCH v7 1/3] fixup: Move python control earlier in Makefile   Simon Glass
• [PATCH v7 1/3] fixup: Move python control earlier in Makefile   Bin Meng
• [PATCH v7 2/2] schemas: Add some common reserved-memory usages   Simon Glass
• [PATCH v7 2/2] serial: zynqmp: Fetch baudrate from dtb and update   Venkatesh Yadav Abbarapu
• [PATCH v7 2/2] serial: zynqmp: Fetch baudrate from dtb and update   Michal Simek
• [PATCH v7 2/3] x86: coreboot: Drop USB init on startup   Simon Glass
• [PATCH v7 2/3] x86: coreboot: Drop USB init on startup   Bin Meng
• [PATCH v7 3/3] x86: doc: Update summaries and add links   Simon Glass
• [PATCH v8 0/2] Add support to fetch baudrate from dtb   Venkatesh Yadav Abbarapu
• [PATCHv8 00/15] net/lwip: add lwip library for the network stack   Maxim Uvarov
• [PATCHv8 00/15] net/lwip: add lwip library for the network stack   Tom Rini
• [PATCHv8 00/15] net/lwip: add lwip library for the network stack   Maxim Uvarov
• [PATCHv8 00/15] net/lwip: add lwip library for the network stack   Simon Glass
• [PATCHv8 00/15] net/lwip: add lwip library for the network stack   Maxim Uvarov
• [PATCHv8 00/15] net/lwip: add lwip library for the network stack   Ilias Apalodimas
• [PATCHv8 00/15] net/lwip: add lwip library for the network stack   Simon Goldschmidt
• [PATCHv8 00/15] net/lwip: add lwip library for the network stack   Peter Robinson
• [PATCHv8 00/15] net/lwip: add lwip library for the network stack   Tom Rini
• [PATCHv8 00/15] net/lwip: add lwip library for the network stack   Maxim Uvarov
• [PATCHv8 00/15] net/lwip: add lwip library for the network stack   Simon Glass
• [PATCHv8 00/15] net/lwip: add lwip library for the network stack   Simon Goldschmidt
• [PATCHv8 00/15] net/lwip: add lwip library for the network stack   Tom Rini
• [PATCHv8 01/15] net/lwip: add doc/develop/net_lwip.rst   Maxim Uvarov
• [PATCHv8 01/15] net/lwip: add doc/develop/net_lwip.rst   Ilias Apalodimas
• [PATCHv8 02/15] net/lwip: integrate lwIP library   Maxim Uvarov
• [PATCHv8 03/15] net/lwip: implement dns cmd   Maxim Uvarov
• [PATCHv8 03/15] net/lwip: implement dns cmd   Ilias Apalodimas
• [PATCHv8 03/15] net/lwip: implement dns cmd   Simon Goldschmidt
• [PATCHv8 03/15] net/lwip: implement dns cmd   Maxim Uvarov
• [PATCHv8 04/15] net/lwip: implement dhcp cmd   Maxim Uvarov
• [PATCHv8 04/15] net/lwip: implement dhcp cmd   Ilias Apalodimas
• [PATCHv8 04/15] net/lwip: implement dhcp cmd   Simon Goldschmidt
• [PATCHv8 05/15] net/lwip: implement tftp cmd   Maxim Uvarov
• [PATCHv8 05/15] net/lwip: implement tftp cmd   Ilias Apalodimas
• [PATCHv8 05/15] net/lwip: implement tftp cmd   Simon Goldschmidt
• [PATCHv8 05/15] net/lwip: implement tftp cmd   Maxim Uvarov
• [PATCHv8 06/15] net/lwip: implement wget cmd   Maxim Uvarov
• [PATCHv8 06/15] net/lwip: implement wget cmd   Ilias Apalodimas
• [PATCHv8 07/15] net/lwip: implement ping cmd   Maxim Uvarov
• [PATCHv8 07/15] net/lwip: implement ping cmd   Ilias Apalodimas
• [PATCHv8 08/15] net/lwip: add lwIP configuration   Maxim Uvarov
• [PATCHv8 09/15] net/lwip: implement lwIP port to U-Boot   Maxim Uvarov
• [PATCH v8 1/2] configs: Add support in Kconfig and convert for armada boards   Venkatesh Yadav Abbarapu
• [PATCHv8 10/15] net/lwip: update .gitignore with lwIP   Maxim Uvarov
• [PATCHv8 11/15] net/lwip: connection between cmd and lwip apps   Maxim Uvarov
• [PATCHv8 12/15] net/lwip: replace original net commands with lwip   Maxim Uvarov
• [PATCHv8 13/15] net/lwip: split net.h to net.h, arp.h and eth.h   Maxim Uvarov
• [PATCHv8 14/15] net/lwip: drop old net/wget   Maxim Uvarov
• [PATCHv8 15/15] net/lwip/wget add port selection   Maxim Uvarov
• [PATCHv8 15/15] net/lwip/wget add port selection   Ilias Apalodimas
• [PATCH v8 2/2] serial: zynqmp: Fetch baudrate from dtb and update   Venkatesh Yadav Abbarapu
• [PATCHv9 00/15] net/lwip: add lwip library for the network stack   Maxim Uvarov
• [PATCHv9 00/15] net/lwip: add lwip library for the network stack   Ilias Apalodimas
• [PATCHv9 00/15] net/lwip: add lwip library for the network stack   Maxim Uvarov
• [PATCHv9 01/15] submodule: add lwIP as git submodule   Maxim Uvarov
• [PATCHv9 01/15] submodule: add lwIP as git submodule   Simon Glass
• [PATCHv9 01/15] submodule: add lwIP as git submodule   Maxim Uvarov
• [PATCHv9 01/15] submodule: add lwIP as git submodule   Tom Rini
• [PATCHv9 01/15] submodule: add lwIP as git submodule   Simon Goldschmidt
• [PATCHv9 01/15] submodule: add lwIP as git submodule   Alper Nebi Yasak
• [PATCHv9 02/15] net/lwip: add doc/develop/net_lwip.rst   Maxim Uvarov
• [PATCHv9 03/15] net/lwip: integrate lwIP library   Maxim Uvarov
• [PATCHv9 04/15] net/lwip: implement dns cmd   Maxim Uvarov
• [PATCHv9 05/15] net/lwip: implement dhcp cmd   Maxim Uvarov
• [PATCHv9 06/15] net/lwip: implement tftp cmd   Maxim Uvarov
• [PATCHv9 07/15] net/lwip: implement wget cmd   Maxim Uvarov
• [PATCHv9 08/15] net/lwip: implement ping cmd   Maxim Uvarov
• [PATCHv9 09/15] net/lwip: add lwIP configuration   Maxim Uvarov
• [PATCHv9 10/15] net/lwip: implement lwIP port to U-Boot   Maxim Uvarov
• [PATCHv9 11/15] net/lwip: update .gitignore with lwIP   Maxim Uvarov
• [PATCHv9 12/15] net/lwip: connection between cmd and lwip apps   Maxim Uvarov
• [PATCHv9 13/15] net/lwip: replace original net commands with lwip   Maxim Uvarov
• [PATCHv9 14/15] net/lwip: split net.h to net.h, arp.h and eth.h   Maxim Uvarov
• [PATCHv9 15/15] net/lwip: drop old net/wget   Maxim Uvarov
• [PULL] please pull u-boot-coldfire/next   Angelo Dureghello
• [PULL] please pull u-boot-coldfire/next   Tom Rini
• [PULL] u-boot-at91-fixes-2023.10-b   Eugen Hristev
• [PULL] u-boot-at91-fixes-2023.10-b   Tom Rini
• [PULL] u-boot-riscv/master   Leo Liang
• [PULL] u-boot-riscv/master   Tom Rini
• [PULL] u-boot-riscv/master   Leo Liang
• [PULL] u-boot-riscv/master   Tom Rini
• [PULL] u-boot-riscv/master   Leo Liang
• [PULL] u-boot-riscv/master   Tom Rini
• [PULL] u-boot-riscv/next   Leo Liang
• [PULL] u-boot-riscv/next   Tom Rini
• [PULL] u-boot-sh/master   Marek Vasut
• [PULL] u-boot-sh/master   Tom Rini
• [PULL] u-boot-sh/next   Marek Vasut
• [PULL] u-boot-sh/next   Tom Rini
• [PULL] u-boot-sh/next_ufs   Marek Vasut
• [PULL] u-boot-sh/next_ufs   Tom Rini
• [PULL] u-boot-usb/master   Marek Vasut
• [PULL] u-boot-usb/master   Tom Rini
• [PULL] u-boot-usb/next   Marek Vasut
• [PULL] u-boot-usb/next   Tom Rini
• [PULL] u-boot-usb/next   Marek Vasut
• [PULL] u-boot-usb/next   Tom Rini
• [Question] TI's u-boot.img is built twice   Masahiro Yamada
• [Question] TI's u-boot.img is built twice   Neha Malcom Francis
• [Question] TI's u-boot.img is built twice   Masahiro Yamada
• [Question] TI's u-boot.img is built twice   Neha Malcom Francis
• [Question] TI's u-boot.img is built twice   Masahiro Yamada
• [Question] TI's u-boot.img is built twice   Simon Glass
• [Question] TI's u-boot.img is built twice   Simon Glass
• [Question] TI's u-boot.img is built twice   Andrew Davis
• [Question] TI's u-boot.img is built twice   Simon Glass
• [Question] TI's u-boot.img is built twice   Andrew Davis
• [Question] TI's u-boot.img is built twice   Simon Glass
• [Question] TI's u-boot.img is built twice   Andrew Davis
• [Question] TI's u-boot.img is built twice   Simon Glass
• [RESEND PATCH 0/6] arm: dts: k3-am64 / k3-am62: Fix boot   Roger Quadros
• [RESEND PATCH] spi: cadence_qspi: Select flash subnode at runtime   Udit Kumar
• [RESEND PATCH] spi: cadence_qspi: Select flash subnode at runtime   Neha Malcom Francis
• [RESEND PATCH v1 0/2] clk: amlogic: a1: Add Amlogic A1 clock driver   Igor Prusov
• [RESEND PATCH v1 1/2] dt-bindings: clock: Add Amlogic A1 clock bindings   Igor Prusov
• [RESEND PATCH v1 1/2] dt-bindings: clock: Add Amlogic A1 clock bindings   Simon Glass
• [RESEND PATCH v1 2/2] clk: Add clock driver for Amlogic A1   Igor Prusov
• [RESEND PATCH v1 2/2] clk: Add clock driver for Amlogic A1   Simon Glass
• [RESEND PATCH v1 2/2] clk: Add clock driver for Amlogic A1   Igor Prusov
• [RESEND PATCH v2] rockchip: include: asm: fix entering download mode rk3066   Johan Jonker
• [RESEND PATCH v2] rockchip: include: asm: fix entering download mode rk3066   Kever Yang
• [RESEND PATCH v5 0/7] J721S2 DTS Sync from v6.6-rc1 to u-boot   Manorit Chawdhry
• [RESEND PATCH v5 1/7] configs: j721s2_evm_r5_defconfig: Increase malloc pool size in DRAM   Manorit Chawdhry
• [RESEND PATCH v5 2/7] Revert "arm: dts: k3-j7*: ddr: Update to 0.10 version of DDR config tool"   Manorit Chawdhry
• [RESEND PATCH v5 3/7] arm: mach-k3: j721s2: Add mcu_timer0 id to the dev list   Manorit Chawdhry
• [RESEND PATCH v5 4/7] k3-j721s2: Sync from Linux tag v6.6-rc1   Manorit Chawdhry
• [RESEND PATCH v5 4/7] k3-j721s2: Sync from Linux tag v6.6-rc1   Nishanth Menon
• [RESEND PATCH v5 5/7] k3-am68: Sync from Linux tag v6.6-rc1   Manorit Chawdhry
• [RESEND PATCH v5 5/7] k3-am68: Sync from Linux tag v6.6-rc1   Nishanth Menon
• [RESEND PATCH v5 6/7] docs: board: ti: Add j721s2_evm documentation   Manorit Chawdhry
• [RESEND PATCH v5 7/7] board: ti: j721s2: MAINTAINERS: Update the MAINTAINERS File.   Manorit Chawdhry
• [RFC 0/6] firmware: scmi: add SCMI pinctrl protocol support   AKASHI Takahiro
• [RFC 0/6] firmware: scmi: add SCMI pinctrl protocol support   Fabio Estevam
• [RFC 0/6] firmware: scmi: add SCMI pinctrl protocol support   AKASHI Takahiro
• [RFC 0/6] firmware: scmi: add SCMI pinctrl protocol support   Peng Fan
• [RFC 1/6] firmware: scmi: fix protocol enumeration logic   AKASHI Takahiro
• [RFC 1/6] firmware: scmi: fix protocol enumeration logic   Simon Glass
• [RFC 1/6] firmware: scmi: fix protocol enumeration logic   AKASHI Takahiro
• [RFC 2/6] firmware: scmi: add pinctrl protocol support   AKASHI Takahiro
• [RFC 3/6] pinctrl: add scmi driver   AKASHI Takahiro
• [RFC 3/6] pinctrl: add scmi driver   Simon Glass
• [RFC 3/6] pinctrl: add scmi driver   AKASHI Takahiro
• [RFC 4/6] gpio: add scmi driver based on pinctrl   AKASHI Takahiro
• [RFC 4/6] gpio: add scmi driver based on pinctrl   Michal Simek
• [RFC 4/6] gpio: add scmi driver based on pinctrl   AKASHI Takahiro
• [RFC 4/6] gpio: add scmi driver based on pinctrl   Simon Glass
• [RFC 4/6] gpio: add scmi driver based on pinctrl   AKASHI Takahiro
• [RFC 4/6] gpio: add scmi driver based on pinctrl   Simon Glass
• [RFC 4/6] gpio: add scmi driver based on pinctrl   AKASHI Takahiro
• [RFC 5/6] firmware: scmi: add pseudo pinctrl protocol support on sandbox   AKASHI Takahiro
• [RFC 5/6] firmware: scmi: add pseudo pinctrl protocol support on sandbox   Simon Glass
• [RFC 5/6] firmware: scmi: add pseudo pinctrl protocol support on sandbox   AKASHI Takahiro
• [RFC 6/6] test: dm: add SCMI pinctrl test   AKASHI Takahiro
• [RFC 6/6] test: dm: add SCMI pinctrl test   Simon Glass
• [RFC 6/6] test: dm: add SCMI pinctrl test   AKASHI Takahiro
• [RFC 6/6] test: dm: add SCMI pinctrl test   Simon Glass
• [RFC] make sandbox UT more generic   AKASHI Takahiro
• [RFC] make sandbox UT more generic   Simon Glass
• [RFC] mmc: Remove alignment hole for cmdidx in struct mmc_cmd   Jonas Karlman
• [RFC] mmc: Remove alignment hole for cmdidx in struct mmc_cmd   Ferass El Hafidi
• [RFC PATCH 0/2] RFC version for ATF and OP-TEE Firewalling   Manorit Chawdhry
• [RFC PATCH 0/2] RFC version for ATF and OP-TEE Firewalling   Kamlesh Gurudasani
• [RFC PATCH 0/2] RFC version for ATF and OP-TEE Firewalling   Manorit Chawdhry
• [RFC PATCH 0/4] mtd: ubi: Enable accessing RO filesystems in UBI vols   Sam Edwards
• [RFC PATCH 0/4] mtd: ubi: Enable accessing RO filesystems in UBI vols   Heiko Schocher
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Rob Herring
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Simon Glass
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Tom Rini
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Tom Rini
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Heinrich Schuchardt
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Tom Rini
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Ilias Apalodimas
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Simon Glass
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Ilias Apalodimas
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Jassi Brar
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Tom Rini
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Tom Rini
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Ilias Apalodimas
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Mark Kettenis
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Tom Rini
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Ilias Apalodimas
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Rob Herring
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Simon Glass
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Tom Rini
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Ilias Apalodimas
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Rob Herring
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Simon Glass
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Tom Rini
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Rob Herring
• [RFC PATCH 0/5] Allow for removal of DT nodes and properties   Simon Glass
• [RFC PATCH 0/5] Support display on stm32f469-disco board   Dario Binacchi
• [RFC PATCH 1/2] binman: ti-secure: Add support for firewalling entities   Manorit Chawdhry
• [RFC PATCH 1/2] binman: ti-secure: Add support for firewalling entities   Neha Malcom Francis
• [RFC PATCH 1/2] binman: ti-secure: Add support for firewalling entities   Manorit Chawdhry
• [RFC PATCH 1/5] ARM: dts: stm32f469-disco: sync with Linux 6.5   Dario Binacchi
• [RFC PATCH 1/5] ARM: dts: stm32f469-disco: sync with Linux 6.5   Patrice CHOTARD
• [RFC PATCH 2/2] binman: j721e: Add firewall configurations for atf   Manorit Chawdhry
• [RFC PATCH 2/2] binman: j721e: Add firewall configurations for atf   Andrew Davis
• [RFC PATCH 2/2] binman: j721e: Add firewall configurations for atf   Neha Malcom Francis
• [RFC PATCH 2/2] binman: j721e: Add firewall configurations for atf   Manorit Chawdhry
• [RFC PATCH 2/2] binman: j721e: Add firewall configurations for atf   Manorit Chawdhry
• [RFC PATCH 2/2] binman: j721e: Add firewall configurations for atf   Andrew Davis
• [RFC PATCH 2/2] binman: j721e: Add firewall configurations for atf   Manorit Chawdhry
• [RFC PATCH 2/2] binman: j721e: Add firewall configurations for atf   Andrew Davis
• [RFC PATCH 2/5] ARM: dts: stm32: make the LTDC clock usable by the clock driver   Dario Binacchi
• [RFC PATCH 2/5] ARM: dts: stm32: make the LTDC clock usable by the clock driver   Patrice CHOTARD
• [RFC PATCH 3/5] ARM: dts: stm32: make the DSI clock usable by the clock driver   Dario Binacchi
• [RFC PATCH 3/5] ARM: dts: stm32: make the DSI clock usable by the clock driver   Patrice CHOTARD
• [RFC PATCH 4/5] ARM: dts: stm32: support display on stm32f469-disco board   Dario Binacchi
• [RFC PATCH 4/5] ARM: dts: stm32: support display on stm32f469-disco board   Patrice CHOTARD
• [RFC PATCH 5/5] board: stm32f469-disco: add splash screen with stmicroelectronics logo   Dario Binacchi
• [RFC PATCH v2 0/3] thermal: Integrate VTM and AVS driver   Udit Kumar
• [RFC PATCH v2 0/3] thermal: Integrate VTM and AVS driver   Kumar, Udit
• [RFC PATCH v2 0/8] ATF and OP-TEE Firewalling for K3 devices.   Manorit Chawdhry
• [RFC PATCH v2 0/8] ATF and OP-TEE Firewalling for K3 devices.   Andrew Davis
• [RFC PATCH v2 0/8] ATF and OP-TEE Firewalling for K3 devices.   Manorit Chawdhry
• [RFC PATCH v2 1/3] thermal: k3: Add support for thermal in vtm   Udit Kumar
• [RFC PATCH v2 1/8] dtoc: openssl: Add GetHexOctet method   Manorit Chawdhry
• [RFC PATCH v2 2/3] arm: mach-k3: update board file to use thermal device   Udit Kumar
• [RFC PATCH v2 2/8] binman: ti-secure: Add support for firewalling entities   Manorit Chawdhry
• [RFC PATCH v2 3/3] arm: dts: k3: update device tree for vtm node   Udit Kumar
• [RFC PATCH v2 3/8] binman: ftest: Add test for ti-secure firewall node   Manorit Chawdhry
• [RFC PATCH v2 4/8] binman: k3: add k3-security.h and include it in k3-binman.dtsi   Manorit Chawdhry
• [RFC PATCH v2 5/8] binman: j721e: Add firewall configurations for atf   Manorit Chawdhry
• [RFC PATCH v2 6/8] binman: am62x: Add firewalling configurations   Manorit Chawdhry
• [RFC PATCH v2 7/8] binman: j721s2: Add firewall configurations   Manorit Chawdhry
• [RFC PATCH v2 8/8] binman: j7200: Add firewall configurations   Manorit Chawdhry
• [RFT PATCH 0/2] mmc: meson-gx: improve MMC reliabilty   Jerome Brunet
• [RFT PATCH 0/2] mmc: meson-gx: improve MMC reliabilty   Neil Armstrong
• [RFT PATCH 0/2] mmc: meson-gx: improve MMC reliabilty   neil.armstrong at linaro.org
• [RFT PATCH 1/2] mmc: meson-gx: clean up and align on Linux settings   Jerome Brunet
• [RFT PATCH 2/2] mmc: meson-gx: set 270 core phase during the identification   Jerome Brunet
• [SPAM] [PATCH] clk: fix count parameter type for clk_release_all   Xavier Drudis Ferran
• [Uboot-stm32] [PATCH v3 2/7] configs: default activate CONFIG_RNG_STM32 for STM32MP13x platforms   Patrice CHOTARD
• [Uboot-stm32] [PATCH v3 3/7] rng: stm32: Implement configurable RNG clock error detection   Patrice CHOTARD
• [Uboot-stm32] [PATCH v3 6/7] rng: stm32: Implement custom RNG configuration support   Patrice CHOTARD
• about ik316   project-tvbox project-tvbox
• Binman how to build using Rockchip BL32 binary as OP-TEE   Massimo Pegorer
• Binman how to build using Rockchip BL32 binary as OP-TEE   Simon Glass
• Binman how to build using Rockchip BL32 binary as OP-TEE   Jonas Karlman
• Binman how to build using Rockchip BL32 binary as OP-TEE   Massimo Pegorer
• Binman how to build using Rockchip BL32 binary as OP-TEE   Simon Glass
• Binman how to build using Rockchip BL32 binary as OP-TEE   Massimo Pegorer
• Binman how to build using Rockchip BL32 binary as OP-TEE   Massimo Pegorer
• Binman how to build using Rockchip BL32 binary as OP-TEE   Jonas Karlman
• Binman how to build using Rockchip BL32 binary as OP-TEE   Jonas Karlman
• Binman how to build using Rockchip BL32 binary as OP-TEE   Massimo Pegorer
• bootefi with initramfs   Song Sam
• bootefi with initramfs   Sughosh Ganu
• bootstd: CACHE Misaligned operation errors (Marvell Armada 385)   Tony Dinh
• bootstd: CACHE Misaligned operation errors (Marvell Armada 385)   Tom Rini
• bootstd: CACHE Misaligned operation errors (Marvell Armada 385)   Tony Dinh
• bootstd: CACHE Misaligned operation errors (Marvell Armada 385)   Tom Rini
• bootstd: CACHE Misaligned operation errors (Marvell Armada 385)   Tony Dinh
• bootstd: CACHE Misaligned operation errors (Marvell Armada 385)   Simon Glass
• bootstd: CACHE Misaligned operation errors (Marvell Armada 385)   Tony Dinh
• bootstd: CACHE Misaligned operation errors (Marvell Armada 385)   Tony Dinh
• bootstd: CACHE Misaligned operation errors (Marvell Armada 385)   Tony Dinh
• bootstd: CACHE Misaligned operation errors (Marvell Armada 385)   Tony Dinh
• bootstd: Scanning for USB bootflow will remove existing SCSI bootflow   Tony Dinh
• bootstd: Scanning for USB bootflow will remove existing SCSI bootflow   Simon Glass
• bootstd: Scanning for USB bootflow will remove existing SCSI bootflow   Tony Dinh
• Config fragments   Svyatoslav Ryhel
• Config fragments   Tom Rini
• Config fragments   Svyatoslav Ryhel
• Config fragments   Simon Glass
• Enable thumb on AT91?   Sean Anderson
• Enable thumb on AT91?   Eugen Hristev
• Enabling POST in imx8mp processor board. -reg   S, Lavakumar (GE HealthCare)
• github dependabot alert on py / pytest   Frank Wunderlich
• github dependabot alert on py / pytest   Tom Rini
• Aw: Re: github dependabot alert on py / pytest   Frank Wunderlich
• github dependabot alert on py / pytest   Tom Rini
• image-host: small improvements and fixes.   Hugo Cornelis
• image-host: small improvements and fixes.   Paul Barker
• Issue with mmc_power_on() and reference counter of regulator   Kenta Sato
• Issue with mmc_power_on() and reference counter of regulator   Jonas Karlman
• Issue with mmc_power_on() and reference counter of regulator   Kenta Sato
• Looking for suggestion on using above 4G memory on ARM64   Kumar, Udit
• NVMe support on RPi CM4 board   Luis Alfredo da Silva
• NVMe support on RPi CM4 board   Simon Glass
• NVMe support on RPi CM4 board   Luis Alfredo da Silva
• NVMe support on RPi CM4 board   Simon Glass
• NVMe support on RPi CM4 board   Luis Alfredo da Silva
• OF: fdt: Ignoring memory range 0x40000000 - 0x80000000   Mario Marietto
• Please pull u-boot-dm   Simon Glass
• Please pull u-boot-dm   Tom Rini
• Please pull u-boot-dm/next   Simon Glass
• Please pull u-boot-dm/next   Tom Rini
• Please pull u-boot-dm/next   Manorit Chawdhry
• Please pull u-boot-dm/next   Tom Rini
• Please pull u-boot-x86 into -next   Bin Meng
• Please pull u-boot-x86 into -next   Tom Rini
• PSCI: prefetch abort with Mainline linux (even with rockchip u-boot)   Tim Lunn
• Pull request: please pull u-boot-imx-20230905   Stefano Babic
• Pull request: please pull u-boot-imx-20230905   Tom Rini
• Pull request: please pull u-boot-imx-20230905   Stefano Babic
• Pull request: please pull u-boot-imx-20230905   Tom Rini
• Pull request doc-2023-10-rc5   Heinrich Schuchardt
• Pull request doc-2023-10-rc5   Ilias Apalodimas
• Pull request doc-2023-10-rc5   Tom Rini
• Pull request doc-2023-10-rc5-2   Heinrich Schuchardt
• Pull request doc-2023-10-rc5-2   Tom Rini
• Pull request doc-2023-10-rc5-2   Massimo Pegorer
• Question about boot failure of AM64-SK   Masahiro Yamada
• Question about boot failure of AM64-SK   Masahiro Yamada
• Question about boot failure of AM64-SK   Vignesh Raghavendra
• Question about boot failure of AM64-SK   Vignesh Raghavendra
• Question about boot failure of AM64-SK   Masahiro Yamada
• Question about boot failure of AM64-SK   Masahiro Yamada
• Reading from ISO9660 in U-Boot   Simon Glass
• Reading from ISO9660 in U-Boot   Heinrich Schuchardt
• Reading from ISO9660 in U-Boot   Heinrich Schuchardt
• Reading from ISO9660 in U-Boot   Simon Glass
• Reading from ISO9660 in U-Boot   Simon Glass
• Reading from ISO9660 in U-Boot   Heinrich Schuchardt
• Reading from ISO9660 in U-Boot   Simon Glass
• sandbox trace errors in CI loop   Michal Simek
• sandbox trace errors in CI loop   Tom Rini
• sandbox trace errors in CI loop   Michal Simek
• sandbox trace errors in CI loop   Tom Rini
• sandbox trace errors in CI loop   Michal Simek
• sandbox trace errors in CI loop   Michal Simek
• sandbox trace errors in CI loop   Simon Glass
• SSE instructions   Simon Glass
• SSE instructions   Heinrich Schuchardt
• SSE instructions   Bin Meng
• SSE instructions   Simon Glass
• SSE instructions   Simon Glass
• SSE instructions   Bin Meng
• sunxi: introduce NCAT2 generation model   Okhunjon Sobirjonov
• sunxi: introduce NCAT2 generation model   Andre Przywara
• Trying to boot custom kernel on Wink Hub (i.MX28)   Rogan Dawes
• Trying to boot custom kernel on Wink Hub (i.MX28)   Fabio Estevam
• Trying to boot custom kernel on Wink Hub (i.MX28)   Rogan Dawes
• Trying to boot custom kernel on Wink Hub (i.MX28)   Fabio Estevam
• Trying to boot custom kernel on Wink Hub (i.MX28)   Rogan Dawes
• Trying to boot custom kernel on Wink Hub (i.MX28)   Fabio Estevam
• Trying to boot custom kernel on Wink Hub (i.MX28)   Rogan Dawes
• Trying to boot custom kernel on Wink Hub (i.MX28)   Fabio Estevam
• Trying to boot custom kernel on Wink Hub (i.MX28)   Rogan Dawes
• Trying to boot custom kernel on Wink Hub (i.MX28)   Fabio Estevam
• Trying to boot custom kernel on Wink Hub (i.MX28)   Rogan Dawes
• UEFI update files missing on sandbox?   Simon Glass
• UEFI update files missing on sandbox?   Sughosh Ganu
• UEFI update files missing on sandbox?   Simon Glass
• UEFI update files missing on sandbox?   Simon Glass
• UEFI update files missing on sandbox?   Sughosh Ganu
• Updates for RPi for 2023.10:   Peter Robinson
• Updates for RPi for 2023.10:   Tom Rini
• USB: error messages on DWC3 gadget endpoint dequeue   João Paulo Silva Gonçalves
• USB: error messages on DWC3 gadget endpoint dequeue   Rasmus Villemoes
• USB: error messages on DWC3 gadget endpoint dequeue   João Paulo Silva Gonçalves
• zboot: [PATCH] boot/pxe-utils: populate initrd_filesize for extlinux boot   Ryan Lahfa
• zboot: [PATCH] boot/pxe-utils: populate initrd_filesize for extlinux boot   Simon Glass