[PATCH 12/19] ARM: dts: renesas: Synchronize R-Car R8A779F0 S4 DTs with Linux 6.5.3
Marek Vasut
marek.vasut+renesas at mailbox.org
Sun Sep 17 16:13:12 CEST 2023
Synchronize R-Car R8A779F0 S4 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .
Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
---
arch/arm/dts/r8a779f0.dtsi | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/arch/arm/dts/r8a779f0.dtsi b/arch/arm/dts/r8a779f0.dtsi
index f20b612b2b9..1d5426e6293 100644
--- a/arch/arm/dts/r8a779f0.dtsi
+++ b/arch/arm/dts/r8a779f0.dtsi
@@ -1059,7 +1059,7 @@
compatible = "renesas,ipmmu-r8a779f0",
"renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xee480000 0 0x20000>;
- renesas,ipmmu-main = <&ipmmu_mm 10>;
+ renesas,ipmmu-main = <&ipmmu_mm>;
power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
@@ -1068,7 +1068,7 @@
compatible = "renesas,ipmmu-r8a779f0",
"renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xee4c0000 0 0x20000>;
- renesas,ipmmu-main = <&ipmmu_mm 19>;
+ renesas,ipmmu-main = <&ipmmu_mm>;
power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
@@ -1077,7 +1077,7 @@
compatible = "renesas,ipmmu-r8a779f0",
"renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xeed00000 0 0x20000>;
- renesas,ipmmu-main = <&ipmmu_mm 0>;
+ renesas,ipmmu-main = <&ipmmu_mm>;
power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
@@ -1086,7 +1086,7 @@
compatible = "renesas,ipmmu-r8a779f0",
"renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xeed40000 0 0x20000>;
- renesas,ipmmu-main = <&ipmmu_mm 2>;
+ renesas,ipmmu-main = <&ipmmu_mm>;
power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
@@ -1108,8 +1108,7 @@
interrupt-controller;
reg = <0x0 0xf1000000 0 0x20000>,
<0x0 0xf1060000 0 0x110000>;
- interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
prr: chipid at fff00044 {
@@ -1119,7 +1118,7 @@
};
thermal-zones {
- sensor_thermal1: sensor1-thermal {
+ sensor_thermal_rtcore: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -1133,7 +1132,7 @@
};
};
- sensor_thermal2: sensor2-thermal {
+ sensor_thermal_apcore0: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -1147,7 +1146,7 @@
};
};
- sensor_thermal3: sensor3-thermal {
+ sensor_thermal_apcore4: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
@@ -1164,10 +1163,10 @@
timer {
compatible = "arm,armv8-timer";
- interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
ufs30_clk: ufs30-clk {
--
2.40.1
More information about the U-Boot
mailing list