[PATCH 1/4] configs: at91: sam9x60_curiosity: update sam9x60_curiosity_mmc_defconfig

[Durai Manickam KR]

- Enable Device model supported NAND driver configs in SDMMC defconfig.
- Enable SYSRESET for Atmel/Microchip's platforms.

Signed-off-by: Durai Manickam KR <durai.manickamkr at microchip.com>
---
 configs/sam9x60_curiosity_mmc_defconfig | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/configs/sam9x60_curiosity_mmc_defconfig b/configs/sam9x60_curiosity_mmc_defconfig
index 10937d67d7..279c4c1f4b 100644
--- a/configs/sam9x60_curiosity_mmc_defconfig
+++ b/configs/sam9x60_curiosity_mmc_defconfig
@@ -38,6 +38,8 @@ CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y
@@ -50,6 +52,9 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_FAT=y
 CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
 CONFIG_CLK=y
 CONFIG_CLK_CCF=y
 CONFIG_CLK_AT91=y
@@ -60,10 +65,17 @@ CONFIG_CPU=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_AT91=y
+CONFIG_ATMEL_EBI=y
+CONFIG_MFD_ATMEL_SMC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_MICROCHIP_FLEXCOM=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ATMEL=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_DM_NAND_ATMEL=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_PHY_MICREL=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
@@ -71,6 +83,8 @@ CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_AT91=y
 CONFIG_TIMER=y
 CONFIG_MCHP_PIT64B_TIMER=y
 CONFIG_W1=y
-- 
2.25.1