[PATCH v2 13/22] sunxi: clock: D1/R528: Enable PLL LDO during PLL1 setup

[Andre Przywara]

The D1/R528/T113s SoCs introduce a new "LDO enable" bit in the CPUX_PLL.
Just enable that when we program that PLL.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h |  1 +
 arch/arm/mach-sunxi/clock_sun50i_h6.c             | 12 +++++++-----
 2 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
index 37df4410eaa..9895c2c220e 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
@@ -228,6 +228,7 @@ struct sunxi_ccm_reg {
 
 /* pll1 bit field */
 #define CCM_PLL1_CTRL_EN		BIT(31)
+#define CCM_PLL1_LDO_EN			BIT(30)
 #define CCM_PLL1_LOCK_EN		BIT(29)
 #define CCM_PLL1_LOCK			BIT(28)
 #define CCM_PLL1_OUT_EN			BIT(27)
diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c
index 767a39fa2ab..d32e33465f5 100644
--- a/arch/arm/mach-sunxi/clock_sun50i_h6.c
+++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c
@@ -89,11 +89,13 @@ void clock_set_pll1(unsigned int clk)
 	writel(val, &ccm->cpu_axi_cfg);
 
 	/* clk = 24*n/p, p is ignored if clock is >288MHz */
-	writel(CCM_PLL1_CTRL_EN | CCM_PLL1_LOCK_EN | CCM_PLL1_CLOCK_TIME_2 |
-#ifdef CONFIG_MACH_SUN50I_H616
-	       CCM_PLL1_OUT_EN |
-#endif
-	       CCM_PLL1_CTRL_N(clk / 24000000), &ccm->pll1_cfg);
+	val = CCM_PLL1_CTRL_EN | CCM_PLL1_LOCK_EN | CCM_PLL1_CLOCK_TIME_2;
+	val |= CCM_PLL1_CTRL_N(clk / 24000000);
+	if (IS_ENABLED(CONFIG_MACH_SUN50I_H616))
+	       val |= CCM_PLL1_OUT_EN;
+	if (IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2))
+	       val |= CCM_PLL1_OUT_EN | CCM_PLL1_LDO_EN;
+	writel(val, &ccm->pll1_cfg);
 	while (!(readl(&ccm->pll1_cfg) & CCM_PLL1_LOCK)) {}
 
 	/* Switch CPU to PLL1 */
-- 
2.35.8