Question about boot failure of AM64-SK

[Vignesh Raghavendra]

Hi,

On 21/09/23 21:52, Masahiro Yamada wrote:
> On Fri, Sep 22, 2023 at 12:03 AM Masahiro Yamada <masahiroy at kernel.org> wrote:
>>
>> Hi.
>>
>> I am seeing a boot failure on AM64-SK.
>>
>>
>> I got the following error in SPL of the main core.
>> Do you have any clue?
> 
> 
> 
> As a side-topic, I downloaded a prebuilt image
> from https://www.ti.com/tool/SK-AM64
> 
> It failed too (but in a different way).
> 
> I flashed tisdk-debian-bookworm-am64xx-evm.wic
> to a SD card by using the 'dd' command, then I got this:
> 


Prebuilt images are targeted for High Secure (HS FS) devices. Looks like
the board has a non HS Silicon (GP). Please overwrite the tiboot3.bin in
boot partition with that of GP

cp tiboot3-am64x-gp-evm.bin tiboot3.bin


> 
> 
> U-Boot SPL 2023.04 (Jul 14 2023 - 08:10:06 +0000)
> EEPROM not available at 0x50, trying to read at 0x51
> k3_system_controller sysctrler: k3_sysctrler_start: Boot Notification
> response failed. ret = -110
> Firmware init failed on rproc (-110)
> 
> resetting ...
> ti_sci system-controller at 44043000: ti_sci_get_response: Message
> receive failed. ret = -110
> ti_sci system-controller at 44043000: ti_sci_get_response: Message
> receive failed. ret = -110
> ti_sci system-controller at 44043000: ti_sci_get_response: Message
> receive failed. ret = -110
> no sysreset
> ### ERROR ### Please RESET the board ###
> 
> 
> 
> 
> Am I doing something wrong?
> 
> 
> 
> 
> 
> 

-- 
Regards
Vignesh