[PATCH v2 4/8] arm: dts: k3-am625-sk: Enable emmc in SPL

[Nishanth Menon]

On 07:35-20230919, Sverdlin, Alexander wrote:
> Hello Sjoerd,
> 
> On Thu, 2023-04-06 at 20:55 +0200, Sjoerd Simons wrote:
> > sdhci0 on the k3-am625-sk is the emmc, enable this in SPL as well to
> > allow booting from that media.
> > 
> > Signed-off-by: Sjoerd Simons <sjoerd at collabora.com>
> > Reviewed-by: Tom Rini <trini at konsulko.com>
> 
> thanks for the patch! I've tested the eMMC boot on AM625 SK
> and this was exactly the missing piece, with the patch it boots fine:
> 
> Tested-by: Alexander Sverdlin <alexander.sverdlin at siemens.com>

note: I have also posted https://lore.kernel.org/r/20230911162535.1044560-4-nm@ti.com

That should take care of this in the kernel sync next time around.

But, for next:

Reviewed-by: Nishanth Menon  <nm at ti.com>

> 
> > ---
> > 
> > (no changes since v1)
> > 
> >  arch/arm/dts/k3-am625-sk-u-boot.dtsi | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
> > index 0def84b4cf0..5f90a4b56f1 100644
> > --- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
> > +++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
> > @@ -92,6 +92,14 @@
> >         bootph-pre-ram;
> >  };
> >  
> > +&sdhci0 {
> > +       bootph-pre-ram;
> > +};
> > +
> > +&main_mmc0_pins_default {
> > +       bootph-pre-ram;
> > +};
> > +
> >  &sdhci1 {
> >         bootph-pre-ram;
> >  };
> 
> -- 
> Alexander Sverdlin
> Siemens AG
> www.siemens.com

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D