[PATCH] config: j7200: removed not needed power config

Kumar, Udit u-kumar1 at ti.com
Mon Sep 11 16:59:34 CEST 2023


Thank you for suggestion Nishanth

On 9/11/2023 6:51 PM, Nishanth Menon wrote:
> On 16:49-20230911, Udit Kumar wrote:
>> [..]
> And maybe expand this patch so that it contains something like the
> following to prevent this from coming back again elsewhere?
>
> diff --git a/drivers/clk/ti/Kconfig b/drivers/clk/ti/Kconfig
> index fbcdefd889ae..aff1ba5ab43b 100644
> --- a/drivers/clk/ti/Kconfig
> +++ b/drivers/clk/ti/Kconfig
> @@ -36,7 +36,7 @@ config CLK_TI_MUX
>   
>   config CLK_TI_SCI
>   	bool "TI System Control Interface (TI SCI) clock driver"
> -	depends on CLK && TI_SCI_PROTOCOL && OF_CONTROL
> +	depends on CLK && TI_SCI_PROTOCOL && OF_CONTROL && !CLK_K3
>   	help
>   	  This enables the clock driver support over TI System Control Interface
>   	  available on some new TI's SoCs. If you wish to use clock resources
> @@ -44,24 +44,24 @@ config CLK_TI_SCI
>   
>   [..]
>   
>   config CLK_K3
>   	bool "Clock support for K3 SoC family of devices"
> -	depends on CLK
> +	depends on CLK && !CLK_TI_SCI
>   	help
>   	  Enables the clock translation layer from DT to device clocks.
>   

I think these may end up recursive dependency


> diff --git a/drivers/power/domain/Kconfig b/drivers/power/domain/Kconfig
> index 411c210756a3..9625764b304b 100644
> --- a/drivers/power/domain/Kconfig
> +++ b/drivers/power/domain/Kconfig
> @@ -92,14 +92,14 @@ config TEGRA186_POWER_DOMAIN
>   
>   config TI_SCI_POWER_DOMAIN
>   	bool "Enable the TI SCI-based power domain driver"
> -	depends on POWER_DOMAIN && TI_SCI_PROTOCOL
> +	depends on POWER_DOMAIN && TI_SCI_PROTOCOL && !TI_POWER_DOMAIN
>   	help
>   	  Generic power domain implementation for TI devices implementing the
>   	  TI SCI protocol.
>   
>   config TI_POWER_DOMAIN
>   	bool "Enable the TI K3 Power domain driver"
> -	depends on POWER_DOMAIN && ARCH_K3
> +	depends on POWER_DOMAIN && ARCH_K3 && !TI_SCI_POWER_DOMAIN
>   	help
>   	  Generic power domain implementation for TI K3 devices.
>   

and these too.



More information about the U-Boot mailing list