[PATCH 09/10] ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco

[Dario Binacchi]

commit e4e724099f04072053cf411456e3e9aae48c4af1 Linux upstream.

In the schematics of document UM1907, the power supply for the micro SD
card is the same 3v3 voltage that is used to power other devices on the
board. By generalizing the name of the voltage regulator, it can be
referenced by other nodes in the device tree without creating
misunderstandings.

This patch is preparatory for future developments.

Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue at foss.st.com>
---

 arch/arm/dts/stm32f746-disco.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/dts/stm32f746-disco.dts b/arch/arm/dts/stm32f746-disco.dts
index 9541f449fd0e..e1564d69f9f6 100644
--- a/arch/arm/dts/stm32f746-disco.dts
+++ b/arch/arm/dts/stm32f746-disco.dts
@@ -44,9 +44,9 @@
 		regulator-always-on;
 	};
 
-	mmc_vcard: mmc_vcard {
+	vcc_3v3: vcc-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "mmc_vcard";
+		regulator-name = "vcc_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
@@ -82,7 +82,7 @@
 
 &sdio1 {
 	status = "okay";
-	vmmc-supply = <&mmc_vcard>;
+	vmmc-supply = <&vcc_3v3>;
 	cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default", "opendrain";
 	pinctrl-0 = <&sdio_pins_a>;
-- 
2.34.1