[PATCH 1/1] riscv: set fdtfile on VisionFive 2

[Leo Liang]

On Fri, Sep 22, 2023 at 09:54:23PM +0800, Shengyu Qu wrote:
> Hello Leo,
> 
> This patch seems only landed in next branch, not master. It is seriously
> 
> needed to make visionfive 2 working properly. Could you merge it to
> 
> master branch?
> 
> Best regards,
> 
> Shengyu
> 

Hi Shengyu, 

Got it!
Will do ASAP!

Best regards,
Leo

> > Multiple revisions of the StarFive VisionFive 2 board exist. They can be
> > identified by reading their EEPROM.
> > 
> > Linux uses two differently named device-tree files. To load the correct
> > device-tree we need to set $fdtfile to the device-tree file name that
> > matches the board revision.
> > 
> > Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt at canonical.com>
> > Reviewed-by: Leo Yu-Chi Liang <ycliang at andestech.com>
> > Tested-by: Milan P. Stanić <mps at arvanta.net>
> > ---
> >   arch/riscv/Kconfig                            |  1 +
> >   .../visionfive2/starfive_visionfive2.c        | 43 ++++++++++++++++++-
> >   2 files changed, 42 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > index 6771d8d919..1c62c2345b 100644
> > --- a/arch/riscv/Kconfig
> > +++ b/arch/riscv/Kconfig
> > @@ -26,6 +26,7 @@ config TARGET_SIFIVE_UNMATCHED
> >   config TARGET_STARFIVE_VISIONFIVE2
> >   	bool "Support StarFive VisionFive2 Board"
> > +	select BOARD_LATE_INIT
> >   config TARGET_TH1520_LPI4A
> >   	bool "Support Sipeed's TH1520 Lichee PI 4A Board"
> > diff --git a/board/starfive/visionfive2/starfive_visionfive2.c b/board/starfive/visionfive2/starfive_visionfive2.c
> > index d609262b67..05d8d2d657 100644
> > --- a/board/starfive/visionfive2/starfive_visionfive2.c
> > +++ b/board/starfive/visionfive2/starfive_visionfive2.c
> > @@ -5,14 +5,20 @@
> >    */
> >   #include <common.h>
> > -#include <asm/io.h>
> > -#include <asm/sections.h>
> >   #include <cpu_func.h>
> >   #include <dm.h>
> > +#include <env.h>
> > +#include <asm/arch/eeprom.h>
> > +#include <asm/io.h>
> > +#include <asm/sections.h>
> >   #include <linux/bitops.h>
> >   #define JH7110_L2_PREFETCHER_BASE_ADDR		0x2030000
> >   #define JH7110_L2_PREFETCHER_HART_OFFSET	0x2000
> > +#define FDTFILE_VISIONFIVE2_1_2A \
> > +	"starfive/jh7110-starfive-visionfive-2-v1.2a.dtb"
> > +#define FDTFILE_VISIONFIVE2_1_3B \
> > +	"starfive/jh7110-starfive-visionfive-2-v1.3b.dtb"
> >   /* enable U74-mc hart1~hart4 prefetcher */
> >   static void enable_prefetcher(void)
> > @@ -33,6 +39,31 @@ static void enable_prefetcher(void)
> >   	}
> >   }
> > +/**
> > + * set_fdtfile() - set the $fdtfile variable based on the board revision
> > + */
> > +static void set_fdtfile(void)
> > +{
> > +	u8 version;
> > +	const char *fdtfile;
> > +
> > +	version = get_pcb_revision_from_eeprom();
> > +	switch (version) {
> > +	case 'a':
> > +	case 'A':
> > +		fdtfile = FDTFILE_VISIONFIVE2_1_2A;
> > +	        break;
> > +
> > +	case 'b':
> > +	case 'B':
> > +	default:
> > +		fdtfile = FDTFILE_VISIONFIVE2_1_3B;
> > +	        break;
> > +	};
> > +
> > +	env_set("fdtfile", fdtfile);
> > +}
> > +
> >   int board_init(void)
> >   {
> >   	enable_caches();
> > @@ -41,6 +72,14 @@ int board_init(void)
> >   	return 0;
> >   }
> > +int board_late_init(void)
> > +{
> > +	if (CONFIG_IS_ENABLED(ID_EEPROM))
> > +		set_fdtfile();
> > +
> > +	return 0;
> > +}
> > +
> >   void *board_fdt_blob_setup(int *err)
> >   {
> >   	*err = 0;