[PATCHv8 05/15] net/lwip: implement tftp cmd

Simon Goldschmidt goldsimon at gmx.de
Wed Sep 13 10:38:32 CEST 2023



On 13.09.2023 08:15, Ilias Apalodimas wrote:
>> +
>> +/*
>> + * (C) Copyright 2023 Linaro Ltd. <maxim.uvarov at linaro.org>
>> + */
>> +
>> +#include <common.h>
>> +#include <command.h>
>> +#include <console.h>
>> +#include <bootstage.h>
>> +
>> +#include "tftp_client.h"
>> +#include "tftp_server.h"
>> +#include <tftp_example.h>
>> +
>> +#include <string.h>
>> +
>> +#include <net/ulwip.h>
>> +
>> +static ulong daddr;
>> +static ulong size;
>> +
>> +static void *tftp_open(const char *fname, const char *mode, u8_t is_write)
>> +{
>> +	return NULL;
>> +}
>> +
>> +static void tftp_close(void *handle)
>> +{
>> +	log_info("\ndone\n");
>> +	log_info("Bytes transferred = %ld (0x%lx hex)\n", size, size);
>> +
>> +	bootstage_mark_name(BOOTSTAGE_KERNELREAD_STOP, "tftp_done");
>> +	if (env_set_hex("filesize", size)) {
>> +		log_err("filesize not updated\n");
>> +		ulwip_exit(-1);
>> +		return;
>> +	}
>> +	ulwip_exit(0);
>> +}
>> +
>> +static int tftp_read(void *handle, void *buf, int bytes)
>> +{
>> +	return 0;
>> +}
>> +
>> +static int tftp_write(void *handle, struct pbuf *p)
>> +{
>> +	struct pbuf *q;
>> +
>> +	for (q = p; q != NULL; q = q->next) {
>> +		memcpy((void *)daddr, q->payload, q->len);
>> +		daddr += q->len;
>> +		size += q->len;
>> +		log_info("#");
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static void tftp_error(void *handle, int err, const char *msg, int size)
>> +{
>> +	char message[100];
>> +
>> +	memset(message, 0, sizeof(message));
>> +	memcpy(message, msg, LWIP_MIN(sizeof(message) - 1, (size_t)size));
>> +
>> +	log_info("TFTP error: %d (%s)", err, message);
>> +}
>> +
>> +static const struct tftp_context tftp = {
>> +	tftp_open,
>> +	tftp_close,
>> +	tftp_read,
>> +	tftp_write,
>> +	tftp_error
>> +};
>> +
>> +int ulwip_tftp(ulong addr, char *fname)
>> +{
>> +	void *f = (void *)0x1; /* unused fake file handle*/
>
> I haven't dug into lwip details yet, but I am not sure this is safe to use.
> Simon, since you maintain the lwip part can you elaborate a bit more?

 From the lwIP design, using an invalid pointer here is ok: that pointer
is only used as a client handle which is never dereferenced internally.
The only requirement is that it is not NULL, as that is the validity
check for the tftp client to know the handle is valid (or e.g. open
failed etc.).

So while we can leave 0x1 here, using a static uint8_t would probably be
better, at the expense of using a byte for nothing.

Regards,
Simon

>
>> +	err_t err;
>> +	ip_addr_t srv;
>> +	int ret;
>> +	char *server_ip;
>> +
>> +	if (!fname || addr == 0)
>> +		return CMD_RET_FAILURE;
>> +
>> +	size = 0;
>> +	daddr = addr;
>> +	server_ip = env_get("serverip");
>> +	if (!server_ip) {
>> +		log_err("error: serverip variable has to be set\n");
>> +		return CMD_RET_FAILURE;
>> +	}
>> +
>> +	ret = ipaddr_aton(server_ip, &srv);
>> +	if (!ret) {
>> +		log_err("error: ipaddr_aton\n");
>> +		return CMD_RET_FAILURE;
>> +	}
>> +
>> +	log_info("TFTP from server %s; our IP address is %s\n",
>> +		 server_ip, env_get("ipaddr"));
>> +	log_info("Filename '%s'.\n", fname);
>> +	log_info("Load address: 0x%lx\n", daddr);
>> +	log_info("Loading:");
>> +
>> +	bootstage_mark_name(BOOTSTAGE_KERNELREAD_START, "tftp_start");
>> +
>> +	err = tftp_init_client(&tftp);
>> +	if (!(err == ERR_OK || err == ERR_USE))
>> +		log_err("tftp_init_client err: %d\n", err);
>> +
>> +	err = tftp_get(f, &srv, TFTP_PORT, fname, TFTP_MODE_OCTET);
>> +	/* might return different errors, like routing problems */
>> +	if (err != ERR_OK) {
>> +		log_err("tftp_get err=%d\n", err);
>> +		return CMD_RET_FAILURE;
>> +	}
>> +
>> +	if (env_set_hex("fileaddr", addr)) {
>> +		log_err("fileaddr not updated\n");
>> +		return CMD_RET_FAILURE;
>> +	}
>> +
>> +	return CMD_RET_SUCCESS;
>> +}
>> --
>> 2.30.2
>>
>
> Thanks
> /Ilias


More information about the U-Boot mailing list