[PATCH 6/6] arm: dts: k3-am625-sk: Mark dependent nodes for pre-relocation phase

[Roger Quadros]

CPSW node needs PHY, MDIO, pinmux, DMA and INTC nodes.
main_conf is required for phy_gmii_sel.
Mark them as 'bootph-all' so they are available in all
pre-relocation phases.

Fixes the below dts warnings:

<stdout>: Warning (reg_format): /bus at f0000/syscon at 100000/phy at 4044:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
<stdout>: Warning (reg_format): /bus at f0000/ethernet at 8000000/ethernet-ports/port at 1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
<stdout>: Warning (unit_address_vs_reg): /bus at f0000/syscon at 100000: node has a unit name, but no reg or ranges property
<stdout>: Warning (pci_device_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
<stdout>: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (avoid_default_addr_size): /bus at f0000/syscon at 100000/phy at 4044: Relying on default #address-cells value
<stdout>: Warning (avoid_default_addr_size): /bus at f0000/syscon at 100000/phy at 4044: Relying on default #size-cells value
<stdout>: Warning (avoid_default_addr_size): /bus at f0000/ethernet at 8000000/ethernet-ports/port at 1: Relying on default #address-cells value
<stdout>: Warning (avoid_default_addr_size): /bus at f0000/ethernet at 8000000/ethernet-ports/port at 1: Relying on default #size-cells value
<stdout>: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
<stdout>: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'

Signed-off-by: Roger Quadros <rogerq at kernel.org>
---
 arch/arm/dts/k3-am625-sk-u-boot.dtsi | 39 ++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
index c658506256..b78d34b459 100644
--- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
@@ -21,6 +21,10 @@
 	};
 };
 
+&main_conf {
+	bootph-all;
+};
+
 &cbass_main {
 	bootph-all;
 };
@@ -118,8 +122,43 @@
 	};
 };
 
+&inta_main_dmss {
+	bootph-all;
+};
+
+&main_pktdma {
+	bootph-all;
+};
+
+&cpsw3g_mdio {
+	bootph-all;
+};
+
+&cpsw3g_phy0 {
+	bootph-all;
+};
+
+&cpsw3g_phy1 {
+	bootph-all;
+};
+
+&main_rgmii1_pins_default {
+	bootph-all;
+};
+
+&main_rgmii2_pins_default {
+	bootph-all;
+};
+
+&phy_gmii_sel {
+	bootph-all;
+};
+
 &cpsw3g {
 	bootph-all;
+	ethernet-ports {
+		bootph-all;
+	};
 };
 
 &cpsw_port1 {
-- 
2.34.1