[PATCH 00/10] ARM: dts: stm32f746 sync with Linux kernel 6.5

[Dario Binacchi]

This series contains my patches on the device tree for stm32f746-disco board
that have already been merged into the Linux mainline. Since most of them
applied perfectly, and for the remaining ones, only minimal changes were made,
I preferred not to merge them into a single patch, which would have been less
readable.


Dario Binacchi (10):
  dt-bindings: mfd: stm32f7: Add binding definition for CAN3
  ARM: dts: stm32: add pin map for CAN controller on stm32f7
  ARM: dts: stm32: add CAN support on stm32f746
  ARM: dts: stm32: use RCC macro for CRC node on stm32f746
  ARM: dts: stm32: add pin map for i2c3 controller on stm32f7
  ARM: dts: stm32: add touchscreen on stm32f746-disco board
  ARM: dts: stm32: add ltdc support on stm32f746 MCU
  ARM: dts: stm32: add pin map for LTDC on stm32f7
  ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
  ARM: dts: stm32: support display on stm32f746-disco board

 arch/arm/dts/stm32f7-pinctrl.dtsi        | 126 +++++++++++++++++++++++
 arch/arm/dts/stm32f746-disco-u-boot.dtsi | 103 +++++-------------
 arch/arm/dts/stm32f746-disco.dts         |  69 ++++++++++++-
 arch/arm/dts/stm32f746.dtsi              |  59 ++++++++++-
 include/dt-bindings/mfd/stm32f7-rcc.h    |   1 +
 5 files changed, 276 insertions(+), 82 deletions(-)

-- 
2.34.1